Skip to main content
eBay

MINI EXCAVATOR 4 IN 1 BUCKET

1200mm wide cut- 450mm floor-450mm high-185kg
  • AU $2,999.00
  • Buy It Now
    • 37 watching
View Details
Ears pins supplied with bucket but not fitted as every excavator has different requirements. Details of your excavator hitch need to be supplied if we are fitting contact Steve for a price.
Condition: New: Other (see details)
Time left: 10d 18h 37m
Item location: Melton South, VIC
Sold by:
  • Excavator Digging Bucket 600mm will suit a 3.5 Tonne Excavator

    AU $650.00
    Buy It Now
    or Best Offer
    Was used on a Komatsu PC35 3.5 Tonne Excavator. Bucket is located in Hunter Valley, NSW. 2 hours north of Sydney. 35mm - pin diameter. 195mm - Pin centre. 145mm - Between the ears. WWW.FlanQuip.com.au...
  • Yanmar vio70 excavator 2000 tilt mud bucket/ hammer pipes

    AU $15,600.00
    20 bids
    • 67 watching
    1 x tilt mud bucket which has just had some pipes replaced. Machine has hammer pipes. Every bit of mud and dirt cleaned out of the tracks. The machine has a few oil leaks as you can see in pic 10 and ...
  • Excavator Bucket

    AU $500.00
    Buy It Now
    I'm selling my 600mm bucket of a Takeuchi TB016 cause I never use it. It's in good condition, teeth are as new. Not sure if it can fit other machines, $500 ono. 0412353103. Mick.
  • 5KC3SB Bucket Teeth with Pins (Pack of 5) - Excavator, Skid Steer, Bobcat

    AU $62.35
    Buy It Now
    • 65 watching
    • |
    • 65 sold
    5KC3SB - Blade Teeth with Retainers (Pack of 5) - Keech/Hitachi Style. These are the most common tooth style in Australia for excavators up to 3.5 Tonne and for skid steer loaders.
  • Excavator bucket

    AU $100.00
    0 bids
    Excavator Bucket to suit Kubota RX-301 or similar. Bucket Width: 220mm. Pin length from ear to ear: 135mm. Pin spacing from centre to centre: 170mm. Inspection and pick up from Pakenham 3810.
  • Excavator Bucket

    AU $99.00
    Buy It Now
    Please see my store for excavator buckets going cheap! Bucket:Width - 640mm (25") Bucket Opening - 870mm (34") Pin Ear Sizes:Ear Spacing - 203mm (8") Pin Holes - 50mm (2")
  • HITACHI EXCAVATOR BUCKET

    AU $680.00
    Buy It Now
    • 17 watching
    HITACHI EXCAVATOR 5 TON 300mm WIDE BRAND NEW COMPLETE WITH PINS READY TO USE RING CHRIS 0415556903
  • 5 ton excavator "Atlas tilt" and Oz brand 450mm 350mm buckets +ripper REWARD

    AU $1,000.00
    Buy It Now
    or Best Offer
    RED 450mm OZ brand digging bucket (has side plates welded on to outer edge teeth area) 45mm pins, 220mm centres and 150mm between the ears. RED Ripper OZ brand single sharp shank.
  • NEW 1850MM SKID STEER ROOT/ ROCK / SCRAP GRAPPLE BUCKET E SERIES DOUBLE CYLINDER

    AU $1,690.00
    1 bid
    It is 1850mm wide. Thank you for looking at my Wildcat Skid Double Cylinder E Series Steer Rock Grapple Bucket. I can put it onto a ute, trailer or truck with my skid steer. 770mm high.
  • Brand New Excavator Bucket Suit 2ton machine (Brand New)

    1000 mm wide Mud Bucket (suit Kobota)
    AU $550.00
    Buy It Now
    or Best Offer
    • 9 watching
    • |
    • 1 sold
    Brand New Excavator Buckets and Attachments. To Suit a 1.5-2.5ton Excavator. With Heavy Duty Steel. Pin Ear Size's. we are a 100% australian Owned manufacture! 1.5-2.5Ton (1000mm) 30 mm Pin's.
  • Excavator bucket 600mm

    AU $2,000.00
    Buy It Now
    Excavator bucket 600mm , centre to centre 360mm, ear to ear 255mm, 65mm pins. New teeth, Located Liverpool area. 0418 417 488
  • KOMATSU EXCAVATOR SIEVE BUCKET

    AU $1,950.00
    Buy It Now
    • 43 watching
    KOMATSU 5 TON SIEVE BUCKET 1500mm WIDE 45mm PINS 230mm CENTER TO CENTER 170mm BETWEEN THE EARS RING CHRIS 0415556903
  • excavator bucket

    AU $4,000.00
    0 bids
    2100mm so you can fit all the other buckets in. Here is a great bucket bolt on cutting edge heavy duty bulk out bucket custom made by Titan. PC 200 or 220 pick up.
  • EXCAVATOR BUCKET BOSSES

    AU $295.00
    Buy It Now
    • 18 watching
    BRAND NEW EXCAVATOR BUCKET BOSES 100mm BORE SET OF 4 $295.00 PER SET RING CHRIS 0415556903
  • HITACHI 5 TON EXCAVATOR SIEVE BUCKET

    AU $1,950.00
    Buy It Now
    • 8 watching
    BRAND NEW HITACHI 5 TON SIEVE BUCKET 1200mm WIDE COMPLETE WITH CUTTING EDGE AND PINS CAN FREIGHT AUST WIDE AT COST RING CHRIS 0415556903
  • EXCAVATOR TILT BUCKET 5 TONNE 1200MM

    TILT BUCKET EXCAVATOR 5 TONNE 1200MM
    AU $3,900.00
    Buy It Now
    • 19 watching
    (bbb) betta bilt buckets 5 tonne 1200mm tilt bucket. (in stock) all products are in stock ready for immediate delivery australia wide.our products are demanded and utilised australia wide.
  • excavator buckets

    AU $800.00
    0 bids
    Bucket is 450mm to suit 20 or 22 ton excavator. PC 200 pick up slight bow in the sides which doesnt affect its digging still has the original teeth.
  • Bucket Tooth Weld on Adapter Suit 1T-3T Excavator Bobcat Etc

    AU $25.00
    Buy It Now
    Free Postage
    • 12 watching
    • |
    • 23 sold
    Bucket Tooth Adapter to Suit 1T-3T Excavator or Bobcat Etc. Best Suited to 100x12 Cutting Edge, but can fit most buckets. This Weld on Adapter 8013 Suit Teeth 1504 and 1505 Which can be found in our E...
  • 18VIP Tiger Tooth - Bucket, Excavator, Skid Steer, Bobcat, Kubota, Yanmar, Esco

    AU $12.67
    Buy It Now
    or Best Offer
    18VIP/VTP - Single Tiger Tooth - Esco 18 Series. These are a direct replacement part for Esco 18 Series style teeth.
  • EXCAVATOR BUCKET 20T 420mm

    AU $2,500.00
    Buy It Now
    or Best Offer
    420mm wide. Very good condition good teeth. Sandblasted painted. 310 between ears. 80mm pin. 470mm centre - pin to pin. Suits hitachi.
  • Kubota Excavator Bucket

    AU $440.00
    0 bids
    600gp Kubota digging bucket off a 5tonne machine, hasn't been used for a long time so selling, 148mm between ears. 200mm centre between pins. 45mm pick up pins. Local pick up.
  • KUBOTA KX71-3 3 TONNE AC CLOSED CABIN EXCAVATOR WITH 4 BUCKETS, RIPPER & AUGER

    "2009 LATE MODEL, LOW HOURS, AIR CON, HAMMER PIPING"
    AU $33,000.00
    Buy It Now
    • 13 watching
    2009 kubota kx71-3 3 tonne excavator. Up for offer is a 2009 KUBOTA KX71-3 3 TONNE, CLOSED AC CAB EXCAVATOR with less than 1900 genuine hours.
  • HITACHI 5 TON MUD BUCKET

    AU $1,550.00
    Buy It Now
    • 16 watching
    HITACHI 5 TON EXCAVATOR MUD BUCKET WITH CUTTING EDGE 1500mm WIDE COMPLETE WITH PINS RING CHRIS 0415556903
  • KOMATSU EXCAVATOR BUCKET

    AU $1,150.00
    Buy It Now
    • 6 watching
    KOMATSU EXCAVATOR BUCKET 5 TON 600mm WIDE COMPLETE WITH PINS READY TO USE RING CHRIS 0415556903
  • NEW 1280MM SKELETON EXCAVATOR BUCKET TO SUIT PC120, SK120(N), DW140, EX120

    AU $2,450.00
    0 bids
    Can deliver to metro brisbane area or local brisbane transport depot. Reserve the right to remove at any time as up for sale else where. Can deliver local brisbane to freight company for free.
  • KOBELCO EXCAVATOR SK50 BUCKET

    AU $680.00
    Buy It Now
    • 20 watching
    • |
    • 2 sold
    BRAND NEW SK50 EXCAVATOR BUCKET 300mm WIDE COMES COMPLETE WITH 45mm PINS 255mm CENTER TO CENTER CAN AUST WIDE AT EXTRA COST RING CHRIS 0415556903
  • 20 Tonne Excavator Tilting Mud Bucket

    AU $8,500.00
    Buy It Now
    or Best Offer
    Tilting Mud Bucket to suit 18 - 24 Tonne Excavator. Heavy Duty Design. 1800mm Wide. Twin Hydraulic Rams. Bolt-On Cutting Edge. 400 Grade Material. Overload Relief Valves.
  • 5KC3SB Bucket Tooth - Excavator, Skid Steer, Bobcat, Kubota, Yanmar, Esco

    AU $10.16
    Buy It Now
    or Best Offer
    • 31 watching
    • |
    • 134 sold
    5KC3SB - Blade Tooth - Keech/Hitachi Style. These are the most common tooth style in Australia for excavators up to 3.5 Tonne and for skid steer loaders.
  • 5KC3STT Bucket Tiger Tooth - Excavator, Skid Steer, Bobcat, Kubota, Yanmar

    AU $13.33
    Buy It Now
    or Best Offer
    • 47 watching
    • |
    • 190 sold
    5KC3STT - Tiger Tooth - Keech/Hitachi Style. These are the most common tooth style in Australia for excavators up to 3.5 Tonne and for skid steer loaders.