How to fit your DeadCat to the Rode VideoMic Pro R

Like if this Guide is helpful

Note : This guide is for the Rode VideoMic Pro R and the Rode DeadCat VideoMic Pro R only

To fit the Deadcat to the VideoMic Pro :

1. Undo the velcro at the opening of the deadcat.
2. You will see a V section of stretch material at the opening, this goes to the bottom of the microphone.
3. Pull the deadcat over the foam windsock and slide the stretchy V section under the mic BETWEEN the foam and the plastic mount.
4. Continue to pull the deadcat over the mic, note that the stretchy V section continues to slide between the foam and the plastic mount.
5. When fully pulled on the velcro latch will join up at the back on the mic, a perfect fit.

In case you didn't get it the first time  :

1. Undo the velcro at the opening of the deadcat.
2. You will see a V section of stretch material at the opening, this goes to the bottom of the microphone.
3. Pull the deadcat over the foam windsock and slide the stretchy V section under the mic BETWEEN the foam and the plastic mount.
4. Continue to pull the deadcat over the mic, note that the stretchy V section continues to slide between the foam and the plastic mount.
5. When fully pulled on the velcro latch will join up at the back on the mic, a perfect fit.

How to fit your DeadCat
Edit link Remove
Add up to 3 more photos
How to fit your DeadCat
Have something to share, create your own Guide... Write a Guide
Explore more Guides