Hunter PGJ Pop up Rotor

Like if this Guide is helpful

Features

  • Models: Shrub, 10 cm, 15 cm, 30 cm
  • Arc setting: 40 to 360 degrees
  • Nozzle choices: 8
  • Nozzle range: 0.75 to 5.0
  • Standard factory installed nozzle: 2.0 only
  • Factory installed rubber cover
  • Through-the-top arc adjustment
  • Quick check arc mechanism
  • Water lubricated gear-drive
  • Warranty period: 2 years

Operating Specifications

Radius: 4.3 to 11.6 m
Flow rate: 0.13 to 1.23 m3/hr; 2.2 to 20.5 l/min
Recommended pressure range: 1.7 to 3.8 bar; 170 to 380 kPa
Operating pressure range: 1.4 to 7.0 bar; 140 to 700 kPa
Precipitation rates: 15 mm/hr approx.
Nozzle trajectory: 14 degrees approx.


Drain Check Valve (up to 3.0 m of elevation)
As air in the system piping can cause long-term damage to rotors and plumbing, the drain check valve keeps lines from draining when the system is shut off. This saves water, reduces liability, and increases system life.
Instruction guide
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page
Instruction guide
Instruction guide
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page
Instruction guide
Nozzle size guide
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page
Nozzle size guide
Nozzle size guide
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page
Nozzle size guide
Have something to share, create your own Guide... Write a Guide
Explore more Guides