Toro T5 Series Pop-up sprinkler specifications & User Guide

Like if this Guide is helpful
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page

Application

The new Toro® T5 Series Rotor Sprinkler Head has the features to satisfy all your basic irrigation needs while surprising you with a few extras. In the same size body as competitive units with only a 4” pop-up, the new Toro T5 Rotor Sprinkler Head delivers a full 5 inches (12.7 cm) of pop-up height. Part and full-circle arc are all in one sprinkler with a quick and easy top adjustment feature allowing arc sets between 40 – 360 degrees. The Toro T5 nozzle tree offers standard angles, plus a low angle set. Both offer a wide selection of flows. Nozzles are balanced allowing for the use of any nozzle on the same zone where different arcs are being irrigated at the same time. This multi-purpose rotor packs a lot of convenience into one competitively priced unit. For those day-in and day-out installations, the Toro T5 Rotor Sprinkler Head is the only rotor you’ll need.
For use in residential and light commercial turf and landscape.

Features

  • Innovative in-ground profile of any standard 100mm pop-up, but delivers a full 125mm pop-up
  • superior irrigation efficiency from highly engineered nozzles. The nozzle tree includes eight standard and four low angle nozzles
  • Part and full circle sprinkler in one head with heavy duty rubber cover attached to the top of the sprinkler to minimise impact
  • easy top adjustment feature allows the part circle arc to be set anywhere between 40 to 360 Degrees
  • Arc changes are made with a small slotted screwdriver from the top of the sprinkler while popped up or down
  • standard rubber cover
  • factory installed with #3.0 nozzle
  • Two year warranty
  • optional check valve

Specifications

Dimensions:
Body Diameter:
  57mm
Cap Diameter:  67mm
Height: 190mm
Inlet: 20mm (3/4'') FBSP
Trajectory: 25 Deg standard-  10 Deg low angle

Operating Specifications

Radius: 7.6- 15.2 Meters
Flow rate: 2.8-36.5 Lpm
Recommended Pressure range: 170-450 Kpa
Maximum operating pressure: 520Kpa
Pop-up to nozzle: 125mm
Minimum Arc setting: 40 Deg
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page
Have something to share, create your own Guide... Write a Guide
Explore more Guides