Toyota Aurion Avalon Camry Solara Key remote button Repair Pad

Like if this Guide is helpful

Suits :   Aurion, Avalon, Camry, Solara, Sienna, Prodigy, Sportivo, Presara, Touring
(may suit others as long as remote looks the same)

 
No need to swap electronic components
No need to cut new key
No re programming
 



 
Button Replacement offers the cheapest option to repair your worn remote key
Our buttons are Designed and Made in Australia from the top quality Silicone.  Buttons we sell are made from German medical grade LSR that does not degrade over time.
Silicone buttons will outlast originals many times over.

Original buttons and some replacement buttons are made from elastomers that break down as they age. The oily substance that is released over period of time clogs up switches in remotes and makes it difficult to use.
If your remote key still works but buttons are becoming less responsive and work randomly We advise that switches are cleaned first before new Pad is fitted. Once you open your remote (please check "Button replacement procedure" below) you will clean switches following enclosed instructions :

Instructions for Cleaning Switches
To clean switches you would need Isopropyl alcohol (also known as Rubbing Alcohol or Isopropanol) which can be purchased in Australia from local chemist, Dick Smith or Mitre 10. Approximate cost of 100 ml is $10. If Isopropanol is hard to get you can substitute it with tea tree oil.
  • Use wooden skewer or toothpick to dip it in Isopropanol
  • Place couple of drops on the top of switches in your remote key
  • Keep pressing switch a few times till it starts positively clicking
  • Wipe excess of alcohol of with cotton bud and repeat the same process
  • After couple of rounds of cleaning, your switches should unblock and become more responsive.
 
Button Replacement Procedure:
Position flat screwdriver in a small slot at the top of your remote and twist it, so detachable part moves away from key part.
Photo
 Remove internal components and separate old rubber from electronic board.
Photo
Silicone buttons will be fitted from inside of remote. Simply press fit silicone buttons in correct cut outs of the plastic shell.
 
PhotoPhoto
Once your silicone buttons are fitted in, place electronic board back in remote, cover it with bottom part of the shell and close it. No reprogramming is need it as remote will work straight away.
 
Photo
Free postage within Australia Only.
No Pickups
Have something to share, create your own Guide... Write a Guide
Explore more Guides