Apex Glacier Headphone DAC AMP audiophile android USB 24-bit, 96-kBPS amplifierSee original listing
15 Sep, 2013 22:16:53 AEST
WILLETTON, Western Australia, Australia
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully ... Read moreabout the condition
I have for sale here a used Apex Glacier headphone dac amp.
I have used this with my HTC one phone for the last month, it works brilliantly for this purpose works fine with android phones to output high quality sound.
I am selling because it was a bit of an impulse purchase and now im trying to get some money together for another tech purchase, funny that haha..
I paid $495 for this, and the cable was $99 sold with it as a pair. It is audiophile grade.
It is still under warranty, and has never skipped a beat :-)
Any questions please dont hesitate to ask!
Also please check out my other auctions for other cheap tech deals!
On 05-Sep-13 at 23:59:45 AEST, seller added the following information:
Forgot the mention, the USB cable is a USB OTG cable so it plugs straight into an android micro usb port. You can also use a normal micro usb cable to connect it to a computer of course.
A NEW review from our friend Chris Martens... http://www.hifiplus.com/articles/apex-hi-fi-glacier-portable-headphone-ampdac/
A review or two more! http://www.headfonia.com/supersharp-apex-glacier/2/http://www.headfonia.com/supersharp-apex-glacier/2/ http://audio-head.com/apex-glacier-portable-headphone-amp-and-dac/
The newest creation from designer/engineer Pete Millett for the Apex High Fi Audio line is the portable Apex Glacier. This amp is so slim and cool!
The Glacier has a great headphone amplifier section. The DAC section is 24/96 and sounds fantastic. The Glacier also has an excellent power supply to insure the electronics are not lacking for power!
Features include three gain settings, separate USB inputs for charging the amp and Digital In, Digital volume control, color volume/on/off indicator and 4 connector strips to connect your Glacier and portable source together. No rubber bands or sticky mess as the connector strips are removable and leave no residue!
But the best features of all are the footprint of the Glacier. It is ultra-thin and is the same footprint as the most popular portable sources – the iPod and iPhone as well as many other portable players.
· 24-bit, 96-kBPS USB DAC – A Cirrus Logic DAC driven by a Tenor isochronous USB interface provides support for up to 24-bit, 96-kSPS digital audio from a USB host. This implementation requires no drivers, and works seamlessly with Windows or Mac PCs or other devices with a USB host port (including the iPad using the Apple CCK). Charging from the USB DAC port can be enabled or disabled, to allow use with low-power portable devices that cannot supply enough current to charge the Glacier.
· Stepped Attenuator - No cheap volume control pot here. Small potentiometers are notoriously bad - they mis-track, get noisy, and break. So the Glacier uses a microprocessor-controlled analog stepped attenuator. Each of the 32 steps changes the volume level by a precise 2dB, and the gain difference between channels is less than ±0.2dB - compare that to normal pots that at best provide ±3dB! The current volume setting is indicated by the color of the front-panel LED. In addition, you can select 0dB, 10dB, or 20dB of maximum gain at the press of a button, to accommodate all sources and headphone sensitivities.
· High output power - What's the point of a headphone amp if it can't drive any more than your iPod? Using a current feedback amplifier, the Glacier puts out 2.6V RMS (7.4V P-P) and up to 100mA of output current, so can easily drive nearly any headphones. The highly efficient, high frequency regulated power supply guarantees full output power over the life of the battery, with low noise and high output current for powerful bass response, even with low impedance headphones.
· DC-coupled design - The signal path in most portable amps is AC-coupled, with a single power supply. This requires the audio signal to pass through multiple capacitors, which degrade the sound and limit frequency response. The Apex Glacier has a bipolar power supply, allowing the audio path to be DC-coupled. That means the low-frequency response extends to 0Hz!
· Long-lasting, rechargeable battery - The Glacier contains a lithium-polymer battery which will power the amp for 12-15 hours at typical listening levels. It recharges in about 2 hours from any USB port, or a USB wall charger. You can also operate it while plugged in to keep the battery topped off.
· Slim, stainless-steel case – A full metal enclosure with stainless-steel skins makes the Glacier slim, strong, and resistant to EMI (electromagnetic interference). Sized to match common portable devices, the Glacier is the thinnest portable headphone amp made!
· Frequency response: DC to >100kHz, ±1dB; 20Hz - 20kHz ±0.1dB @ 1V out
· Maximum output: >2.6V RMS into 150Ω; >1.7V RMS into 32Ω
· Output source impedance: Approximately 2Ω
· THD+N: 0.005% @ 1V RMS out, 20Hz - 20kHz into 150Ω
· Broadband noise: <10μV RMS, unweighted, integrated over 20Hz - 20kHz
· Output DC offset: <5mV
· Input impedance: 10kΩ
· Maximum input level: 2V RMS
· Channel tracking (gain difference between channels, all volume steps): <±0.2dB
· Maximum gain: 0dB, 10dB, or 20dB, ±<0.5dB
· Dimensions: 114mm long x 65mm wide x 9mm thick