Please visit our Ebay Store (Categories on left)! We stock lots of Embedded and Microcontroller related products, like Arduino, Microchip PIC, LCD Displays, Sensors, Wired & Wireless Modules, Connectors, Cables.... and more.
We will ship your item within 1-2 business days from Sydney. Nearly all orders received before 2pm are shipped the same day.
Shipping is via standard post. We can also ship via Express Post for $4 extra.
for special shipping requests.
Please note the text displayed on the LCD display in the main image reads "Modtronix Serial LCD Display", but this IS NOT
a serial LCD display. It is the standard parallel type! It is the same display as we use for our serial I2C/SPI displays. To convert to a serial display, an I2C/SPI serial back boards (daughter boards) available from our shop has to be soldered to the back of the LCD display.
This is a HIGH Quality
Winstar LCD Display, and NOT a cheap, no name brand! We have been using them for close to 10 years for our Electronic Engineering business, and never have any trouble with them. A common misconception is that all LCD displays are the same. This is not true, and the cheap brands will have low contrast, and start to fade after a couple of months or years! It has the standard interface, that nearly all Character Module LCD displays have. It is suited for Arduino, AVR, Microchip PIC or any other Microcontroller. We also sell I2C/SPI serial adapter boards, Arduino serial back boards, LCD connectors, cables and more on our eBay shop!
LCD Character Module Display, 2x16 characters, STN blue (negative),
white LED backlight, Transflective, 6:00, Wide Temepature range, RoHS
compliant, Module size 80mm x 36mm, English-European character set.
This LCD display uses STN technology, which is much better quality
than the cheaper TN types. It has a better contrast and a wider viewing
angle. To be visible, it has to be used with the backlight switched on.
This display also has a wider temperature range. Be careful when buying
cheap LCD displays! Many fade after a short while. We have been using
these LCD displays for many years, and can guarantee they are high
|Click to enlarge
- Number of Characters: 16 characters x 2 Lines
- Character Table: English-European (RS in Datasheet)
- Module dimension: 80.0mm x 36.0mm x 13.2mm(MAX)
- View area: 66.0 x 16.0 mm
- Active area: 56.2 x 11.5 mm
- Dot size: 0.56 x 0.66 mm
- Dot pitch: 0.60 x 0.70 mm
- Character size: 2.96 x 5.46 mm
- Character pitch: 3.55 x 5.94 mm
- LCD type: STN, Negative, Transmissive, Blue
- Duty: 1/16
- View direction: Wide viewing angle
- Backlight Type: white LED
- RoHS Compliant: lead free
- Operating Temperature: -20°C to + 70°C
Serial I2C or SPI controlled LCD Display
A serial adapter is NOT included
with this display, and can be purchased separately! By adding a "Serial
LCD Adapter Module" to the back of this LCD display, it can be
controlled serially via I2C or SPI. For available adapter modules, see the [LCD
and Opto Electronics] --> [Serial LCD Adapter Module] section in our
eBay store (categories on the left).
- Our basic I2C serial adapter can be used to control a LCD display serially via I2C.
- Our "Modtronix LCD2S serial adapters"
can be used to control the LCD via I2C or SPI, and additionally read a
keypad (button debouncing is done) and write to outputs (protected relay
outputs). This adapter also has a DIP switch for setting the I2C
address, allowing up to 4 LCD displays on a single I2C or SPI bus.
All Microcontrollers and boards we sell have an I2C port, including all our Arduino and Microchip PIC boards and processors.
Basic I2C serial adapter on the back of a 16x2 LCD
Basic I2C serial adapter on the back of a 20x4 LCD
LCD2S serial adapter on the back of a 20x4 LCD
LCD with LCD2S serial adapter, connected to Keypad and SBC66EC Ethernet/USB board
|Click to enlarge|
Orders will be shipped within 1-2 business days from receiving payment. In most cases (close to 100%), orders received before 2pm will
be shipped the same day.
All orders are shipped from Sydney (Castle Hill)
. For urgent order, contact us to see if your order can be shipped the same day. Items are normally shipped with Australia Post or FastWay, unless
Payment is via PayPal, Credit Card or Bank Transfer. When selecting bank transfer, you will receive our bank details from eBay.
If a tax invoice is required, please contact us!
If the product is in its original condition you may return any item you purchased from us, for any reason, within 7 days for a full refund.
See below for exceptions. If the returned product is faulty or is returned due to an error on our part, we will pay for the return shipping
cost too! Else, shipping costs are not refundable.
We can not accept returns if:
- The product is not in it's original condition.
- The product is returned later then 7 days after delivery.
- The product is not in it's original wrapper and box.
- If the product is seal wrapped, and has been opened.
Return processing fee:
- When returning non-faulty items, the shipping fee is not refundable, and a $5 processing fee applies.
We are a Sydney based business (Castle Hill), and joined the eBay community 2012. We are available 5 days a week, and do NOT operate our eBay
store on a part time basis! We have been (and still are) operating a successful Electronics business since 2004, and have shipped many 1000s of orders
for this business. We have gained many valuable overseas partners, and specialise in manufacturing and importing high quality products at reasonable prices. You can be sure
your order will be shipped fast and professionally!