Axis CNC USB Card Mach3 200KHz Breakout Board Interface
- Support all the
Mach3 version,including the latest edition :Mach3 R3.042.040
- Support all the Windows
version,Including the latest edition :Windows7.
- No Driver needed for USB,All the Windows version
can be used as soon you insert in it.
- Fully support USB hot swapping,to monitor USB
attachment state any time. While Mach3 are working ,if you uproot USB cable,
then plug it also can make it work at once.
- Support four shaft linkage.Including inching, as
well as four shaft linkage.
support the following functions: Automatic tool-setting,electronic hand wheel,
software limit, software backlash
- Speed: 48M, so you don’t need to use PC. The
Signal is independently processed by the Movement Control Cards, Ensuring that
you get really real-time information and reliability.
- Get 200KHz output, Link to
- Have status
indicator. Can indicate Mach3 attachment, and USB connectivity, when it is on,
all kinds of state are clear for you at a glance.
- Have 16 input indicators,It Clearly indicates
the status of signal-input.
Speed-measurement function,The Spindle actual speed is displayed on the Mach3
interface in real time. And innovatively provide real-time speed graph, Making
the speed variations clear and lively.
- Have on-board isolation power supply, NO
external power supply Simplify the requirements of electric power supply. It’s
convenient to connect external power supply can also be used, so you can have
any choice you like.
- There are
10 super-speed 10 MHz light-couplers, 24General light-couplers, so the total
amounts of light-couplers are up to 34. Isolate all the input/output. The High
costs design provides a complete anti-jamming function and perfect security
- 200KHz,4 axis output,
frequency 200KHz. Use 10MHz high-speed optical coupling to isolate electric
- Support 16 input points. 16
input-isolation light-coupler . Every light-coupler got LED
- Speed: 48M . input real-time
signals so you don’t need to use PC, The Signal is independently processed by
the Movement Control CARDS, Ensuring that you get really real-time information
- Eight output dots
.Users can set functions that you need by yourselves, For example :The driver’s
enable signal, Spindle open/close, and Cooling fluid control and the
- Control card uses USB
to supply power. The Board carries isolating power DC-DC. It’s convenient for
you to use for you don’t need to connect the power additionally
- U spindle speed measurement signal input . Speed: 60
thousand turns/minute. The speed will be displayed on the Mach3 at the same
time,with the real-time display of spindle speed by waveform . It can display
the spindle speed in Mach3 (the red part in the picture)
- Here Offer 100% Satifiation
Service,Inlucde re-send item&refund payment;
- All items here offer 1 year warrenty
- It is not my Duty for Custom Tax
- All item(s) will be shipped via int'l register air
mail or EMS, the time normally takes 7-15 business days. may be
later arrivel if the item be check by custom;
- We only accept paypal payment.