48V 0.5A PoE Injector Power Over Ethernet Adapter
This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the "Data In" port, then plug the cable to your device into the "Data and Power Out" port with your existing network cable.
This Adapter only support 10/100M connection, do not support gigabit ethernet connection, because Data & Power Out port using 4,5,7,8 pin as power transfer, Please do not connect any gigabit ethernet device on "Out" port, this will damage your device.
This is an 802.3af compatible device, but it does NOT include the 802.3af compliant detection feature. It supplies power NO MATTER WHAT, so don't plug the "Data and Power Out" side into anything that isn't ready for it.
Compatible all 802.3af device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....
. Cost Saving, No Power Cabling for WLAN AP, IP Phone and any supported IEEE802.3af Powered Device
. Meeting IEEE 802.3af standards and more sufficiently is able to provide power to PD devices
.Small lightweight plastic enclosure
. Built-in universal 100-240V AC switching power supply
. Standard RJ45 Cat.5 Ethernet data input and output
.Easy, convenient, and simple to use
CAT5 Ethernet Pin Usage: Data: 1,2,3,6 Power: +(4,5),-(7,8)
Voltage Input: AC 100-240 V 50/60Hz
Voltage Output: DC48V 0.5A
Dimension : 85 x 47 x 54mm
Weight -- 95g
PoE Injector Power Over Ethernet Adapter x1(Wireless Access Point not included)
European plug adapter x1