Details about 600W wind turbine generator 12/24V with 600W wind charge controllerSee original listing
17 Jul, 2014 05:37:55 AEST
Brand New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read moreabout the condition
600W Wind Turbine + 600W Wind Controller
12V system or 24V system in stock. pls leave us a message
Low start-up wind speed
The wind turbine wheel are made of a low temperature resistance,aging high strength compound material,can cope with a variety of complex wind conditions,charge wind energy into electrical energy efficiently and sustainably..
Unique Design Of The RudderWind turbine rudders are ale to respond to the wind speed and wind direction flexibly,enhancing the efficiency of power generation.
Monthly Power Generation Cure
The controller user’s manual is suitable for 600W 12V wind turbine generator system.
1 Automatic dump load while the wind turbine generator overload.
2 Batteries overcharge protection.
3 Protect cable connect to batteries inverse.
4 Protect batteries charge to solar panel. at night
5. Protect electric shock.
Technical specifications :
3.1.1 Terminals in accordance with the upper part of the label, the right equipment connected to cable:
W1、W2、W3：Input terminals of wind turbine generator (Regardless of sequence)；
S+：Means nothing S-：Means nothing B+：Batteries ＋ B-：Batteries －
DC＋：Means nothing －1 ：Means nothin－2 ：Means nothing
3.2 Installing steps
3.2.1Controller based on its protection level, housed in indoor and outdoor drying, ventilation, the controller may not be around the inflammable and explosive materials
3.2.2 Controller should be mounted vertically, hanging solid.
3,2,3 Unloading an external device, due to unloading, the equipment surface temperature will exceed 85 ℃, must be firmly placed on the location where not to be touched easily, meanwhile to maintain a well-ventilated, non-flammable, explosive goods.
3.2.4 Before wiring, to put the first wind turbine brakes manually switch to the "︱"position, when wiring to prevent electric shock accidents caused by running generators.
3.2.5 Check the wiring correct, to put the wind turbine brakes manually switch to the "O" position, equipment into operation
Security Warning: the boot before the battery must first access controller may not be the case without the battery running generator, or generating units and the controller will cause damage!
3.3 Running state, indicator function setting
3.3.1 Running indicators
Controller in operation mode, the indicator will show the different status of the operation of equipment, detailed in the table below:
4.1 Ordering Information
4.1.1 Order should be detailed description of equipment configuration requirements, such as: generator sets parameters, the choice of external dump loading devices, protective grading, as well as overload protection.
4.1.2 Use under special conditions, can be customized in accordance with the usage conditions of users.
4.2 Installation Notes
4.2.1 Before accessing controller to confirm the system equipment, such as, wind turbine, batteries, lightning protection devices, cable selection configuration is correct, accurate installation.
4.2.2 Check-to-ground insulation resistance of equipment should be in line with the wind / light generating system of technical requirements.
4.2.3 Installation, disassembly, repair equipment, wind turbine will be sure to manually switch the brake to the "|" position.
5.0 After-sales service
5.1 Customers in the procurement, use, or for advice on the quality of this product can contact the designated distributors or with the company.
1. CE TUV and ROHS certificate
2.12 month warranty
3. the buyer is responsible for the return post mail cost
4.15 days refund and 20 days exchange after receiving the product
1. We prefer you can pay via paypal, thank you !
2. pls pay within 5 days after winning the auction or buying.
you can contact us via email , we will reply you within 24 hours