CANBUS XENON HID KIT BMW 1 Series H7 8000K

This is the one of the only kits available on the market today that is guaranteed 100% CANBUS system compatible

Please don't be fooled by kits claiming "Canbus compatible" when they are standard ballasts that will not work correctly and cause spikes in current that will damage the Canbus control system

We Guarantee our kits will work with all Cars - Even those without Canbus wiring.

FULL 12 MONTH WARRANTY

What is Canbus?

"CANBUS is a message based protocol, designed specifically for automotive applications"

Canbus is a new wiring system in cars that replaces the usual wiring loom with a data cable that sends signals to micro-controllers positioned around the car, This makes the system very sensitive to changes to the electrical system or to spikes in the electrical system.

It is found mainly on newer cars, from approximately 2006 onwards but this does vary and many smaller manufactures are yet to change to the Canbus system but, no doubt will over time.

Why is our kits the safest to use?

Our Canbus compatible kits use the latest improvements in digital electrical circuitry  to ensure the system works alongside the Canbus system, to ensure that there is no computer errors and to ensure the kit works perfectly every time.

The Digital Ballasts (Controllers) and connections are all fully sealed against dust and water, and have an operating range of  -30°C to 85°C  Meaning they will operate every time, even on cold frosty mornings.

The Digital ballasts carefully monitor and adjust the energy going to the bulbs to ensure the light is always burning ant it optimum while always being safe.

Lower power consumption ensure less strain on the electrical system, Our kits use only 35w (standard bulbs use 55w), But thanks to HID technology they produce more than 400% more light, This is done by replacing the standard bulb filament with an arc system within a small tube of Xenon gas - to Produce the Brightest and most powerful Light available.

Our HID Bulbs are designed with exact specifications to ensure the bulb fits exactly and ensures the light is produced in the exact same location in the reflector to ensure the light hitting the road is in the location where it is most needed. Bulbs are resilient to heat and vibration, and  designed to last the lifetime of the car. Burn times have been tested to exceed 9000 hours (That's 12h per day would last 750days)

6000k 8000k 12000k ?

K Rating is the Kelvin rating it is the scale of measurement used to measure the colour temperature of light....

We recommend 6000k for good white light with a hint of blue for that Xenon look, 8000k will give a strong hint of blue, above will be turning dark blue into purples at approx 12000k, Below 6000k will be starting to turn yellow again like normal Halogen bulbs

Kits contain: 2 Bulbs, 2 Digital Ballasts, and ballast mounting brackets. - Nothing else needed! Complete with clear simple instructions with warranty slip.

All bulbs are a direct fitting - they will fit into the lamp holder in the same manor as a standard bulb then connects to the ballast, - It is a simple DIY fitting.

Our new digital ballast offer a better more constant power and unbeatable reliability - while all in a smaller, slimmer design measuring only 90mm x 80mm x 30mm.

Each kit will replace 1 set of lights (either high or low beam) - 2 kits would be needed to replace both beams.

ANY QUESTIONS PLEASE FEEL FREE TO ASK - WE ARE ALWAYS HERE TO HELP

ALL ITEMS READY FOR INTIMIDATE DISPATCH FROM HERE IN THE UK

UK POWERSELLER - BUY WITH CONFIDENCE