Mr Crystal Fix Concrete Repair Kit for ANYTHING CONCRETE!!

ULTIMATE CRACK REPAIRS ARE just a step away!!

SAVE BIG $$$ on replacing your damaged Concrete Walls, Water Tanks, Pools, Troughs, Ponds, Cellars, Paths, etc

If you have any cracks, weak points, cold joints, porous surfaces starting to break up in your concrete, and even if you simply want to strengthen around your fittings or densify your concrete, this is the perfect product for you!

This extremely, versatile and durable product can be applied to either side of the concrete and it will travel between voids up to about 400mm from the point of application. You will get what’s called crystal growth which is the water proofing & strengthening effect.

Mr Crystal Concrete Tank & Trough Repair Kits are the simple answer to repairing all those leaking concrete tanks and troughs. Mr Crystal comes as a full kit to enable you to repair your concrete tanks and troughs with ease

Used correctly, Mr Crystal will help you rejuvenate concrete structures for the retention of liquid by the formation of insoluble crystals in the capillary tracts of the concrete. Mr Crystal has a reputation of being a cost effective, successful product, easily used by landholders and giving vastly superior results in its field.

Commonly, Mr Crystal is used to repair cracked concrete tanks and stock troughs and is accepted as "the" easy, successful and permanent method.

You will discover that Mr Crystal can save you thousands of dollars by avoiding costly replacement of structures. In fact...consider this!! If you spend around $130 and 40 minutes of your time thus avoiding spending $4000* on replacement of your 45,000 litre/10,000 gallon tank...this will rate your efforts at around $5000 per hour!!!!!!!!!!

*A good quality tank would cost you more!

Mr Crystal is safe for use on concrete structures for potable water.

Mr Crystal is less toxic than the concrete your structure is made from.

Frequently Asked Questions

Q. How does it work?

A. Rather than trying to cover the crack or hole, Mr Crystal actually repairs the concrete by having a chemical reaction with the concrete, which in turn, generates the growth of a non-soluble crystalline formation, which becomes part of the structure itself.

Q. How do I apply Mr Crystal?

A. Mr Crystal comes in a powder form. The material is mixed into a paintable slurry, and then applied with a brush to the cracks (two coats). A strip of material 60mm wide and 6mm thick is required.

Q. Does it only work on concrete?

A. Yes, Mr Crystal utilises the existing concrete as part of its chemistry.

Q. Is it safe for drinking water?

A. Yes, it is less toxic than the concrete your tank is made from. It is approved by water authorities in most countries.

Q. Can Mr Crystal block up my plumbing, or grow into the water?

A. No. Mr Crystal relies on the chemicals "within" the concrete. Therefore it can only function within the concrete. It cannot leach into water or plumbing.

Q. Is it guaranteed to work?

A. Yes. As with all products sold in Australia, it is law (Trade Practices Act 1974), that products be accurately represented and sold as "fit for the intended purpose".

Q. What are the limitations of the product?

A. Mr Crystal will generally repair a concrete structure for the retention of liquid to Australian Standard AS3735, provided that;

1.    The structure has basic structural integrity

2.    It is made from concrete (commonly known as Portland Cement)

3.    It is used according to enclosed directions

Q. How long will it last?

A. Mr Crystal is permanently in the concrete. Its dendritic crystalline growth becomes a permanent part of the concrete.

Q. How does Mr Crystal protect the reinforcement?

In two ways.

1.    Physically – By protecting the steel from the elements (water, minerals and air)

2.    Chemically – By reinstating alkalinity into the concrete.

Q. Does the concrete have to be gouged out?

A. No. Mr Crystal is drawn into the concrete by "capillary" action and it actually migrates through the concrete (via millions of tiny voids).

Q. Does the concrete need to be clean?

A. Yes. Mr Crystal must be applied directly to clean concrete. Mr Crystal has a chemical reaction with the concrete thus; the better it is in contact with the concrete – the better the reaction will be.

Q. Does the area to be treated need to be dry?

A. No. In fact it "must" be wet.

Q. Are there any dangerous fumes given off during application?

A. No.

Q. I am uncertain about the integrity of my structure. What should I do?

A. It is very easy and cost effective to restore structural integrity. All required information and tips are in the information booklet in the kit.