HIGH QUALITY MADE IN GERMANY

CUSTOMER SERVICE +07 3881 0809

PART NO. 50-15002-14

YOU ARE BIDDING ON 1 x FRONT STEEL ESJOT SPROCKET (14 TOOTH) TO SUIT THE FOLLOWING MODELS. Other gearing options are available. Please message us to further consult what we have suitable for your bike.

© Metalgear International Pty Ltd

NOTE

Please check your bike manual or existing sprockets for original Gearing. By purchasing this sprocket you have checked this and have identified the teeth for this sprocket is suitable to your needs as some of our listings are for gearing alternatives. If you are not sure, then please contact us so we can recommend the correct fitment.

Buy purchasing this item you have checked that your exact bike model is in the fitment chart above and / or have identified that this sprocket will suit your needs.

ABOUT ESJOT

ESJOT Antriebstechnik GmbH is a midsize privately owned company specialized since over 80 years in the manufacture of sprockets, gear systems, stamped and milled products.

 Esjot also manufactures OEM sprockets for major Bike Companies such as BMW KTM and more.

FRONT SPROCKETS

Highest quality steel 16 MnCR5 of OEM quality is precision cut on CNC machines. Cutting the teeth with our "DIAMOND CUT" process and case hardening of 700 HV40 (case depth of 0.4 mm) meets the highest quality requirements.

Modern milling machines guarantee a perfect fit on the drive shaft with tolerances of overall diameter and wobble remaining under 0.1 mm.

REAR SPROCKETS

Center holes are precisely cut on CNC machines with extremely low tolerances. Only special steel qualities "Qste 420" and "Qste 460" are used. Mounting holes are countersunk and cleaned.

 Teeth are cut with our new special procedure "DIAMOND CUT" with tolerances of overall diameter and wobble of below 0.2 mm guarantee super smooth running.

THE ESJOT DIFFERENCE: DIAMOND CUT TECHNOLOGY

In cooperation with the University of Paderborn Germany, ESJOT Antriebstechnik GmbH has developed a new process to cut the teeth of chain driven sprockets.

"DIAMOND CUT" is an innovative manufacturing process resulting in a visibly higher sprocket quality than was ever possible on standard milled sprockets.

 Special tooling guarantees a super accurate cutting surface. At the same time the material is highly condensed in the area of the teeth flanges, so that in many cases additional heat treatment is no longer necessary.

All sprockets are made from the best German steel to obtain a continued high quality product.

FOR MORE INFORMATION, VISIT THE ESJOT WEBSITE: WWW.ESJOT.COM

CUSTOMER SUPPORT

PICKUP AVAILABLE PLEASE MESSAGE TO ORGANISE

CAN'T FIND YOUR BIKE MODEL?

Please contact us ( +07 3881 0809) so we can help you find a suitable sprocket to meet your bikes standards.

BEFORE PURCHASING

Please check that you're purchasing a sprocket with your original gearing (unless you are after different) and that it suits your bike model. If unsure, please contact us.

TECHNICAL SUPPORT

We offer extensive experience in Motorcycle Mechanics and engineering from in and out of the pit lane.

 If you experience any difficulty or unsure about your purchase please contact us as we are more then happy to help.

INSTALLATION

We recommend you have your sprockets fitted by a qualified mechanic ensuring your drive-train is in great condition.

Our pages, listings and all its components (including images, audio, video, text) are subject to copyright. Apart from fair dealing for the purposes of private study, research, criticism or review as permitted under the Copyright Act 1968, no part may be reproduced, copied, transmitted in any form or by any means

Powered by eBay Turbo Lister