Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Washer & Dryer Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Washer & Dryer Parts
Our FP toploader was only partially emptying and after several attempts at putting a load through, would not empty at all. We bucketed the water out of the bowl then tilted the machine back against the wall and removed the pump just to check there was nothing stuck in it. It all seemed fine. (be careful you will get wet!) Then we tried another load, it didn't empty. We also checked that things were clean up top by removing the bowl. Lots of dirt but no socks or blockages. So we ordered the pump and after we installed it have had no problems. Everything works just fine. Water empties out every time. We also got a lint filter, almost as the same price as the pump! But a lot less junk is going through the pump now.
Verified purchase: Yes | Condition: New
Later models use a more energy efficient model running on 100v while this type runs on 230v. Because of the frequent load and fuses used with this electric circuit, these pumps tend to be the first thing to go on these washers.
Verified purchase: Yes | Condition: New
Product exactly replaced original item and worked perfectly. Fitment time was about 5 minutes. Well sealed pump with no leaks.
Verified purchase: Yes | Condition: New
Well made quality product that dropped straight in as a replacement for the original unit.
Verified purchase: Yes | Condition: New
Washing machine was failing more often than not, this was a gamble for a last chance before getting a new one, was so relieved, not only did it arrive in 2 days from purchase but it turns out it was the problem, it is very easy to install, our whole family smells better now, our friends and coworkers thank you.
Verified purchase: Yes | Condition: New