Powered by Frooition Pro
INNOVATE LC-1: Lambda Cable + 02 Sensor
Item Description
Brand
new in the box
100% authentic INNOVATE
MOTORSPORTS products
The LC-1 Lambda
cable is a complete wideband controller built in to a sealed cable. It
features the same award-winning patented digital measurement principal
found in the LM-1 & LM-2, and includes digital input, output,
and 2 user programmable analog outputs.
PART# 3769
DESCRIPTION:
INNOVATE LC-1: Lambda
Cable 02 Sensor (Standalone Wideband Controller)
NOTE: NEW
The LC-1 is more
accurate than conventional designs costing many times as much, and its
self-calibrating circuitry an compensate for changes in temperature,
altitude and sensor condition. The LC-1 is ideal for applications such
as Dynos, Data Acquisition, Standalone ECUs, piggyback fuel
controllers, OBD-II software or chip programmers, and gauges. With the
LC-1, you can add additional wideband channels to your LM-1, convert an
existing narrow-band gauge, or add wideband capabilities to your dyno.
You can even tune individual cylinders by using multiple LC-1 kits.
Key Features
* Only fully digital wideband controller.
* Auto calibration capability to compensate for changes in temperature,
altitude, and sensor condition.
* Two user programmable analog outputs.
* Permanent install applications
* Cost effective individual cylinder tuning.
* Easy to upgrade.
* Includes LogWorks software
The LC-1's
analog outputs are compatible with dynamometer software, gauges, or
virtually any brand of Data Acquisition hardware, such as:
- Accel
- Advanced Racing Technologies
- Advantage Motorsports
- AiM Sports ( MyChron)
- Altronics
- Autometer
- Competition Data Systems
- CORRSYS-DATRON
- Corsa Instruments
- Cygnus Data Star
- DTA Competition Engine Management Systems
- Dynamic Test Systems
- Dynocom
- DYNOmite (Land & Sea)
- EcuTek
- Edelbrock Qwik Data
- EFI Technology
- Electromotive
- Engine Management Systems
- Excalibur Solutions
- Brockway Engineering
|
- Fuel Air Spark Technology (FAST)
- FXL Data
- Haltech Engine Management Systems
- Harrison Engineering
- Holley
- Link ECU
- Microtech
- MoTeC
- Mustang Dynamometer
- Pi Research
- Powertrain Control Solutions
- Powertrain Electronics
- Race Technology
- Racepak
- RPM Performance
- SPA Technique
- Stack
- Stuska Dynamometers
- Superflow
- Traqmate
- Etc.
|
 The LC-1 is also a key component of Innovate
Motorsports' Modular Tuning System (MTS). Using the LC-1's serial ports
you can daisy-chain other Innovate devices such as the XD-16, AuxBox
(LMA-3), DL-32, TC-4, and SSI-4.
The basic LC-1 kit includes the LC-1, sensor, cd which includes
software and manuals, bung and a serial cable to connect to
the PC.
Installation and Setup
Installation of the LC-1 is relatively simple. Complete documentation
is supplied, and the support pages, user forum, videos, application
notes and tuner resources can also speed you on your way to effective
tuning. Innovate also has a great network of local dealers, tuners,
race shops, and dyno shops that can assist you in choosing, installing,
and getting the most out of your Innovate products.
Please ask us for INNOVATE LC-1 MANUAL
IN ENGLISH
Logworks
3 for WiFi PC's with Innovate
OT-2 WiFi Interface:
LogWorks
is a software application that interfaces with the Innovate Modular
Tuning System
products. It enables easy analysis and manipulation of engine data
acquired by MTS components
and also allows to view engine data in real-time on the on-screen
virtual gauges.
Computer Requirements
Operating System Windows 98 or later
Computer speed 600MHz Pentium 1 or faster
RAM Min. 100 Mbyte more than recommended for the
operating system
Hard Disk space Min. 100 Mbyte free space
Display Thousands of colors, 800 x 600 Min.
Other 1 free serial port or USB to serial adapter
The LogWorks application is used to record, display and analyze engine
or car data. Natively it provides six different “views” of the data:
1. Main Dashboard
This view displays the current engine data (real-time data) in
“gauges”. Similar to a car’s dashboard. The gauges are configurable in
many ways. This view is active whenever LogWorks receives engine data,
whether the data is being logged or not.
2. Time Trace Log View
This is the main view of a datalog. A datalog is a collection of engine
data, sorted by recording time. The data in the Time Trace Log View
(Log Window) is shown graphically and can be analyzed in many ways.
During recording with LogWorks this view is updated automatically as
new data arrives.
3. Playback View
This is a sub-view of the Time-Trace Log View when the log is played
back. This view is similar to the Main Dashboard View, but shows the
recorded engine data in it’s time sequence when playing back.
4. X-Y Plot View
In this View the logged engine data is shown in its dependency of
another channel. A common example is to plot AFR as dependent on RPM.
But any channel data
combination can be used. The X-Y Plot view also allows viewing and
analyzing the data in different ways. This view is NOT automatically
updated during recording.
5. 3D Chart View
In this View the logged engine data is analyzed and shown in its
dependency of two other channels. A common example is to show AFR data
as dependent on RPM and engine
load. But any channel combination can be used. This view sorts the
engine data into
different fields. The spacing and number of field columns and rows is
user adjustable so it for example fits the spacing and number of how a
fuel injection’s fuel tables are stored.
This view is automatically updated during recording and provides many
analyzing
functions.
6. Channel Statistics View
In this view a single channel is analyzed and its statistical
distribution during a recording session is shown. This view is NOT
automatically updated during recording.
IMPORTANT
MUST READ:
EBAY IS OUR LIVELIHOOD. YOUR
FEEDBACK MAKES A HUGE IMPACT ON OUR TEAM. PLEASE BE CONSIDERATE WHEN
GIVING FEEDBACK.
IN EBAY'S BOOK 4 STARS IS A BAD RATING. PLEASE GIVE US 5 STAR RATINGS.
BUT IF YOU CAN'T GIVE US 5 STARS IN DSR RATINGS, THEN EMAIL US AND YOU
WILL ALWAYS FIND US AT ARM’S LENGTH TO HELP YOU IN ANY WAY POSSIBLE.
THANK YOU!
SHIPPING:
Shipping: FREE BY EMS
AUSTRALIA POST
- Order will be shipped within 2 business day
after payment received. We will send email to your ebay
registrated email address with shipping confirmation.
- We ship from Australia, Brisbane
-
Delivery time: 2 working days
- Insurance is INCLUDED in shipping cost
About Us
We are Xenon UK, international company, with main location in London, UK and few worldwide shipping warehouses, located in United Kingdom, Germany, USA, Japan and Australia. We have distributor accounts in many performance and tuning brands, included AEM, Innovate Motorsports, Greddy, Apexi, PLX Devices, DEI, Exedy, Supersprint, Stoptech, Momo, Morette and this list is growing up monthly!
Our goal - we are offering best prices, FREE shipping for most products, fastest delivery time and saving on import duties - we will ship your order from closest to you location, you can get it fast, often next day, and because it will be shipped from same area, you don't have to pay any import duties. Our contacts:
0390-056-033
Payment
We accept: Paypal as main payment method, all major credit cards frow Paypal and bank wire transfer as alternative payment method. Contact us if you would like to pay by bank wire transfer.
We do not accept any kind of checks or money orders. Payment must be received within 7 days after purchase.
Shipping
From Europe: we are using TNT/FEDEX for all orders more then 0.5kg. Small and lights parts(less then 0.5kg) we ship by priority airmail.
From USA: we are using USPS priority mail or EMS Express mail. Inside USA - FEDEX ground.
From Japan: we are using EMS Japan.
Orders shipped inside Australia shipped only by Australia EMS.
Please always read item description with product specific shipping location and shipping information.
Terms
All of our products are 100% brand new unless otherwise stated in the description above.
All sales are final unless item is defective upon delivery
Please inspect your order upon receipt. No claims will be honored after 5 days of delivery.
We will reimburse you the actual shipping fees for exchange if we shipped incorrect quantity, incorrect item or defective item.
We reserve the right to retract bids from any bidder with a history of negative feedback/non-payment. Please respect the integrity of eBay, only bid if you intend to follow through with your purchase.
Returns
Return for exchange or refund will be allowed only within 14 calendar days from the date of receipt. All authorized return merchandise must be unused and in its original saleable packaging. No return or exchange on merchandise that shows signs of having been installed, mounted, scratched, or defaced will be allowed. RETURN AUTHORIZATION NUMBER must be issued before any returns can be made. We will not accept any returns without this number. The Return Authorization Number does not imply a replacement or refund, but only that we will inspect the merchandise based on your claim. Original shipping and handling charges are not refundable. It is the responsibility of the customer/installer to verify the correctness of size and application of the parts before installation. We cannot be held responsible for parts ordered for the wrong application. If a correct part is ordered, but shipped incorrect, we will make all efforts to make good at no extra charges. Warranty - we are offering full manufacture warranty. Please read product specific warranty terms on manufactures websites. No warranty whatsoever will be valid if the defect was caused by customers abuse, negligence, and/or mishandling. All merchandise sold by Xenon.LV. is only subject to manufacturers warranty, if any, and are subject to submission to the manufacturer for approval for repair or replacement of merchandise.
Helpful Links
More Items!
Frooition www.frooition.com |
eBay design, eBay store design, eBay shop design, eBay template design,
eBay listing design
This listing is currently
undergoing maintenance, we apologise for any inconvenience caused.
supreme
supremewidgets
supremeauctiononlinesoftware.widgets.FeedbackWidgetBasicFree.swf
supremewidgets
On
24-Oct-10 at 03:22:29 AEDST, seller added the following
information:
( Powered by
www.ReturnEasy.com
)
On
27-Jan-11 at 03:26:27 AEDST, seller added the following
information:
@@SCRIPT(0)@@
@@SCRIPT(1)@@ @@SCRIPT(2)@@
Powered by Frooition
Pro
INNOVATE LC-1: Lambda Cable +
02 Sensor
@@SCRIPT(4)@@
- @@SCRIPT(5)@@
- @@SCRIPT(6)@@
@@SCRIPT(7)@@
Item
Description
Brand new in the box
100% authentic
INNOVATE
MOTORSPORTS products
The LC-1 Lambda
cable is a complete wideband controller built in to a sealed cable. It
features the same award-winning patented digital measurement principal
found in the LM-1 & LM-2, and includes digital input, output,
and 2 user programmable analog
outputs.
PART#
3769
DESCRIPTION:
INNOVATE LC-1: Lambda
Cable 02 Sensor (Standalone Wideband
Controller)
NOTE:
NEW
CURRENTLY NOT AVAILABLE. PLEASE
CONTACT US FOR MORE INFORMATION.
The LC-1 is more
accurate than conventional designs costing many times as much, and its
self-calibrating circuitry can compensate for changes in temperature,
altitude and sensor condition. The LC-1 is ideal for applications such
as Dynos, Data Acquisition, Standalone ECUs, piggyback fuel
controllers, OBD-II software or chip programmers, and gauges. With the
LC-1, you can add additional wideband channels to your LM-1, convert an
existing narrow-band gauge, or add wideband capabilities to your dyno.
You can even tune individual cylinders by using multiple LC-1
kits.
Key Features
* Only fully digital wideband controller.
* Auto calibration capability to compensate for changes in temperature,
altitude, and sensor condition.
* Two user programmable analog outputs.
* Permanent install applications
* Cost effective individual cylinder tuning.
* Easy to upgrade.
* Includes LogWorks
software
The LC-1's analog outputs are
compatible with
dynamometer software, gauges, or virtually any brand of Data
Acquisition hardware, such as:
- Accel
- Advanced Racing Technologies
- Advantage Motorsports
- AiM Sports
( MyChron)
- Altronics
- Autometer
- Competition Data Systems
- CORRSYS-DATRON
- Corsa Instruments
- Cygnus Data Star
- DTA
Competition Engine Management Systems
- Dynamic Test Systems
- Dynocom
- DYNOmite (Land & Sea)
- EcuTek
- Edelbrock Qwik Data
- EFI Technology
- Electromotive
- Engine Management Systems
- Excalibur Solutions
- Brockway Engineering
|
- Fuel Air Spark Technology (FAST)
- FXL Data
- Haltech Engine Management Systems
- Harrison
Engineering
- Holley
- Link ECU
- Microtech
- MoTeC
- Mustang Dynamometer
- Pi Research
- Powertrain Control Solutions
- Powertrain Electronics
- Race Technology
- Racepak
- RPM Performance
- SPA Technique
- Stack
- Stuska Dynamometers
- Superflow
- Traqmate
- Etc.
|
The LC-1 is also a key component of Innovate
Motorsports' Modular Tuning System (MTS). Using the LC-1's serial ports
you can daisy-chain other Innovate devices such as the XD-16, AuxBox
(LMA-3), DL-32, TC-4, and SSI-4.
The basic LC-1 kit includes the LC-1, sensor, cd which includes
software and manuals, bung and a serial cable to connect to
the PC.
Installation and
Setup
Installation of the LC-1 is relatively simple. Complete documentation
is supplied, and the support pages, user forum, videos, application
notes and tuner resources can also speed you on your way to effective
tuning. Innovate also has a great network of local dealers, tuners,
race shops, and dyno shops that can assist you in choosing, installing,
and getting the most out of your Innovate
products.
INNOVATE LC-1 MANUAL IN
ENGLISH
Logworks
3 for WiFi PC's with Innovate
OT-2 WiFi Interface:
LogWorks
is a software application that interfaces with the Innovate Modular
Tuning System
products. It enables easy analysis and manipulation of engine data
acquired by MTS components
and also allows to view engine data in real-time on the on-screen
virtual gauges.
Computer Requirements
Operating System Windows 98 or later
Computer speed 600MHz Pentium 1 or faster
RAM Min. 100 Mbyte more than recommended for the
operating system
Hard Disk space Min. 100 Mbyte free space
Display Thousands of colors, 800 x 600 Min.
Other 1 free serial port or USB to serial adapter
The LogWorks application is used to record, display and analyze engine
or car data. Natively it provides six different “views” of the
data:
1. Main Dashboard
This view displays the current engine data (real-time data) in
“gauges”. Similar to a car’s dashboard. The gauges are configurable in
many ways. This view is active whenever LogWorks receives engine data,
whether the data is being logged or not.
2. Time Trace Log View
This is the main view of a datalog. A datalog is a collection of engine
data, sorted by recording time. The data in the Time Trace Log View
(Log Window) is shown graphically and can be analyzed in many ways.
During recording with LogWorks this view is updated automatically as
new data arrives.
3. Playback View
This is a sub-view of the Time-Trace Log View when the log is played
back. This view is similar to the Main Dashboard View, but shows the
recorded engine data in it’s time sequence when playing back.
4. X-Y Plot View
In this View the logged engine data is shown in its dependency of
another channel. A common example is to plot AFR as dependent on RPM.
But any channel data
combination can be used. The X-Y Plot view also allows viewing and
analyzing the data in different ways. This view is NOT automatically
updated during recording.
5. 3D Chart View
In this View the logged engine data is analyzed and shown in its
dependency of two other channels. A common example is to show AFR data
as dependent on RPM and engine
load. But any channel combination can be used. This view sorts the
engine data into
different fields. The spacing and number of field columns and rows is
user adjustable so it for example fits the spacing and number of how a
fuel injection’s fuel tables are stored.
This view is automatically updated during recording and provides many
analyzing
functions.
6. Channel Statistics View
In this view a single channel is analyzed and its statistical
distribution during a recording session is shown. This view is NOT
automatically updated during recording.
download
Logworks 3 and Manual
Xenon UK
phone number: +37129914625, Email: ebay@xenon.lv
If you have any
questions, you can ask them
on our facebook
page
IMPORTANT
MUST READ:
EBAY IS
OUR LIVELIHOOD. YOUR FEEDBACK MAKES A HUGE IMPACT ON OUR TEAM. PLEASE
BE CONSIDERATE WHEN GIVING FEEDBACK.
IN EBAY'S BOOK 4 STARS IS A BAD RATING. PLEASE GIVE US 5 STAR RATINGS.
BUT IF YOU CAN'T GIVE US 5 STARS IN DSR RATINGS, THEN EMAIL US AND YOU
WILL ALWAYS FIND US AT ARM’S LENGTH TO HELP YOU IN ANY WAY POSSIBLE.
THANK
YOU!
SHIPPING:
Shipping:
FREE
-Order will be
shipped within 2 business day
after payment received. We will send email to your ebay
registrated email address with shipping confirmation.
- We ship from
Australia,
Melbourne
- Delivery time: 2
working
days
- We do not ship
to PO boxes
- Insurance is
INCLUDED in shipping
cost
About
Us
We are
Xenon UK, international company, with main location in London, UK and
few worldwide shipping warehouses, located in United Kingdom, Germany, USA,
Japan and Australia. We have distributor accounts in many performance
and tuning brands, included AEM, Innovate Motorsports, Greddy, Apexi,
PLX Devices, DEI, Exedy, Supersprint, Stoptech, Momo, Morette and this
list is growing up monthly!
Our goal - we are offering best
prices, FREE shipping for most products, fastest delivery time and
saving on import duties - we will ship your order from closest to you
location, you can get it fast, often next day, and because it will be
shipped from same area, you don't have to pay any import duties. Our
contacts: Ph: +37129914625
Skype: xenonlv Email: ebay@xenon.lv
Payment
We
accept: Paypal as main payment method, all major credit cards frow
Paypal and bank wire transfer as alternative payment method. Contact us
if you would like to pay by bank wire transfer.
We do not
accept any kind of checks or money orders. Payment must be received
within 7 days after
purchase.
Shipping
From
Europe: we are using TNT/FEDEX for all orders more then 0.5kg. Small
and lights parts(less then 0.5kg) we ship by priority
airmail.
From USA: we are using USPS priority mail or EMS
Express mail. Inside USA - FEDEX ground.
From Japan: we are
using EMS Japan.
Orders shipped inside Australia shipped only
by Australia EMS.
Please always read item description with
product specific shipping location and shipping
information.
Terms
All of
our products are 100% brand new unless otherwise stated in the
description above.
All sales are final unless item is
defective upon delivery
Please inspect your order upon
receipt. No claims will be honored after 5 days of
delivery.
We will reimburse you the actual shipping fees for
exchange if we shipped incorrect quantity, incorrect item or defective
item.
We reserve the right to retract bids from any bidder
with a history of negative feedback/non-payment. Please respect the
integrity of eBay, only bid if you intend to follow through with your
purchase.
Returns
Return
for exchange or refund will be allowed only within 14 calendar days
from the date of receipt. All authorized return merchandise must be
unused and in its original saleable packaging. No return or exchange on
merchandise that shows signs of having been installed, mounted,
scratched, or defaced will be allowed. RETURN AUTHORIZATION NUMBER must
be issued before any returns can be made. We will not accept any
returns without this number. The Return Authorization Number does not
imply a replacement or refund, but only that we will inspect the
merchandise based on your claim. Original shipping and handling charges
are not refundable. It is the responsibility of the customer/installer
to verify the correctness of size and application of the parts before
installation. We cannot be held responsible for parts ordered for the
wrong application. If a correct part is ordered, but shipped incorrect,
we will make all efforts to make good at no extra charges. Warranty -
we are offering full manufacture warranty. Please read product specific
warranty terms on manufactures websites. No warranty whatsoever will be
valid if the defect was caused by customers abuse, negligence, and/or
mishandling. All merchandise sold by Xenon.LV. is only subject to
manufacturers warranty, if any, and are subject to submission to the
manufacturer for approval for repair or replacement of
merchandise.
Helpful
Links
@@SCRIPT(8)@@
@@SCRIPT(9)@@ @@SCRIPT(10)@@ @@SCRIPT(11)@@ @@SCRIPT(12)@@
@@SCRIPT(13)@@
More
Items!
Frooition
www.frooition.com | eBay
design, eBay store design, eBay shop design, eBay template design, eBay
listing
design
This listing
is currently undergoing
maintenance, we apologise for any inconvenience
caused.
@@SCRIPT(15)@@
supreme
supremewidgets
Powered by eBay Turbo Lister
|
)
