Details about ***LS1 OTR Cold Air Intake******LS1 OTR Cold Air Intake*** See original listing
14 May, 2014 17:20:42 AEST
Belmont, Western Australia, Australia
Brand New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read moreabout the condition
VT-VE ss,gts,gto,monaro OTR Cold Air Intake Kit able to use your
factory MAF sensor or adapt to MAFLESS.
Bolt on horsepower with washable filter element.
Power increase of approx. 20+ horsepower
on stock vehicle. Easy to install
NOTE: Replacement filter elements available
Installation: * remove factory air box, air intake pipe. * remove radiator mounting
brackets and lay radiator toward engine. * remove grill and disconnect wiring harness mounting
tabs to allow harness to move for air box. * fit hoses to air box and throttle body and slip air box
down in front of radiator note gap in front of radiator is larger on passenger side of vehicle.
*slip maf sensor into hose on air box and t hen fit into hose on throttle body using fingers or
flat blade screwdriver to fit. * fit hose clamps to both hoses and fit radiator brackets using factory grommets in supplied mounts. * loosen maf wiring near P/S reservoir and plug into
maf sensor. * refit grill assembly. * fit breather hose to air box and fitting on drivers side
of the engine.
For the vt and vx you will need to remove a section the the plastic on top of the fans to make clearance for the otr to sit on top of the radiator this can be done with a Stanley knife or a hacksaw