What are they?
Our billet aluminum strut spacers bolt between the struts carriage and the vehicle frame to provide an extra lift to the front of your Navara, while maintaining the high quality factory ride.
How hard are they to install?
Full installation instructions are included and you do not need a strut compressor. Any licensed mechanic can install this product. We recommend having a wheel alignment completed afterwards.
How much lift will I get?
The larger spacers will lift approximately 50/55mm and the smaller spacers approximately 35/40mm. Please advise during checkout which size you want.
I already have a lift kit installed, can I still use these spacers?
We recommend using the spacers with factory original suspension only. Installing these spacers to a vehicle fitted with a raised suspension may cause driveline & camber issues.
What if I also want to lift the rear of the Navara?
The rear can be lifted using replacement leaf springs, blocks or extended shackles. Check out our ebay store or contact us for more details.
Are there any other modifications that need to be done with this kit?
Because the strut spacers allow for extra downward wheel travel at the front, fitting the larger spacers to some models may experience contact from the upper control arm to the strut tower when the front wheels drop down. This may make a "clunking" noise. If you experience this you could install some rubber insualation to the top of the strut tower or some customers have made their own bump stops on the upper arms.
What models do they fit?
All 4x4 dual cab D40s manufactured from 2005 onwards.
Will these fit a D22 or D21 Navara?
No the D22 & D21 Navara has a completely different suspension design.
How much is delivery?
Australia-wide delivery is free (excluding COD orders)