The Digital Radio Strobe Trigger works with the FM wireless remote control
to trigger camera speedlights. The product is designed for photographic studio and on-location sites.
Radio triggers are best for photographers interested in range and reliability outdoors.
It is also your best option if you want to have off-camera flash inside cars or behind furniture.
The transmitter is attached on the hot shoe of the camera while the receiver is plugged into
the studio flash. Each receiver works with one studio flash. Additional receivers are available to purchase.
4 channels to avoid interference
The receiver has an on/off switch, and an LED to indicate triggering
A standard 1/4" screw mount
Channel Selector outside the transmitter and the receiver
4 channels with hot shoe connector for external flashes
Transmitter Power: 23A 12V battery Receiver Power: 2 AAA Battery (Not included)
Maximum Working Distance: 30m (open area, without interference)
Max available in distance range: 30M (Open fields, no fraise)
Operates on Frequency: 433MHz
Highest responding time up to 1/320s
Triggering life: up to 20,000 times
Trigger can operate additional NPT-04 receivers (available in our store)
Canon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX, 430EZ, 420EX, 420EZ, 380EX;
Nikon SpeedLight SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;
Olympus FL-50R, FL-50, FL-36R, FL-36;
Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;
Sigma EF-530 DG Super, EF-500 DG Super, EF-430;
Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;
Vivitar 285HV, DF-400MZ, DF-340MZ, 2700;
Other flash models with a trigger voltage of 12V or lower.
Directions for Use:
1.Set up the speedlight with battery, power on and turn on the charging switch to let the speedlight fully charge.
2.Set up the channel setting switches.
3.Open up the barn door of the receiver to set up well.
4.Turn on the power switch of receiver.
5.Fix the receiver well on camera head of tripod.
6.Set up the speedlight wells on the receiver.
7.Press on the test button of the transmitter to see if the speedlight starts to work.
8.Insert the hot shoe block of the transmitter into its camera holder.
9.If the camera is without the hot shoe holder, then use sync cable.
One (1) Transmitter (with 23A 12V battery installed)
Two (2) Receiver (Powered by 2 x AAA, Battery is not included)
A standard 1/4" screw mount on each receiver
One (1) Sync Wire Cable (no need to use it for most flashes)