Listing Update...This offering is for a legitimate new-old-stock Shimano cartridge bottom bracket that was made in Japan. This is not to say the newer model 50 series bottom brackets made outside of Japan are an inferior product, but at the same time we do want to distinguish these bottom brackets as a true new-old-stock offering for those folks working on a project where this is a consideration.
This offering is for a new-old-stock Shimano cartridge (sealed) bottom bracket...model BB-UN52. Some of it's specifications include the following:
Cup type/size: English threaded...1.37" cups x 24 threads per inch (tpi)
Shell width: 68 mm
Spindle/axle type: JIS square-tapered
Spindle/axle length: 110 mm
Production locale: Made in Japan
Please note the spindle/axle length is fairly important, because Shimano made this model bottom bracket in several spindle lengths to accommodate a handful of different cranksets.
Our research further indicates the late 90's Deore LX triple cranksets (Models FC-M569 and FC-M570) and mid to late 90's STX-RC triple cranksets are all good examples of mountain bike crankset matches for this bottom bracket. We even noted slightly newer Deore model triple cranksets from the early part of this decade (Models FC-M480 and FC-M510...the latter before it converted to Octalink technology) are also good examples of mountain bike crankset matches for this bottom bracket. All of these model cranksets were spec'd with at least two different spindle lengths...with the 110 mm length generally considered ideal when a 47.5 mm chain line was desired (measured from the center of the seat tube to the middle chainring on a triple crankset). We believe this chain line was usually desired when the front derailleur was mounted on a standard sized seat tube.
As for applicable road crankset offerings, the Shimano Sora and Tiagra double cranksets (Models FC-3300 and 4400, respectively) are also considered a good match for this bottom bracket.
The square-tapered spindle ends are compatible with other vintage Shimano cranksets, but please check your crankset's spindle/axle length requirements before attempting to use this offering with another Shimano crankset...and we can try to help in this regard should you have questions). We empasize this last point, because chainline has a direct impact on shifting performance, so even though selected Shimano crank arms may have the same square-tapered interface, if their spindle/axle length requirements are different from this offering, then there is a strong possibility that shifting performance will suffer...so please pay particular attention to spindle lengths when it comes to purchasing any bottom bracket.
One other note...the left-side adjustable cup is made from a resin/plastic, which is common for Shimano 50-series and below cartridge bottom brackets. We prefer the aluminum alloy adjustable cups found on Shimano's higher-end cartridge bottom brackets, so we wanted to be clear this offering is of inferior quality in this one regard.
As for condition, these units are new and in their original retail box.
Terms and Conditions:
You may visit our store by clicking on this "Store Home Page" link and please note the product categories on the left side of our "Store Home Page".
We have also moved our "Terms and Conditions" to a separate page within our Ebay store. You may navigate to this page by clicking on the link on the left side of our "Store Home Page" (below the product categories) or you may click on one of our "Terms and Conditions" direct links herein.
Note to international customers regarding shipping...
We apologize to those that feel some of our international shipping charges are too high. We only charge actual shipping rates, but once an order exceeds a certain amount, we hesitate to use the least expensive US Postal Services First Class International service. We feel this way, because this service is not trackable or insurable...so more risk of loss. We prefer the US Postal Services Priority Mail International service for more expensive orders, because this service is trackable at USPS.com and insurable...so less risk of loss. Unfortunately, this service is more expensive, especially for smaller/lighter packages, relative to the First Class International service. We are sorry about these higher shipping costs, but hopefully our notes help to explain why this is the case.
Note to international customers regarding customs...
We also apologize to those that feel their country import taxes, duties and brokerage fees are excessive. As a small US business, we are required by customs' laws to declare each order as a retail sale. Additionally, the declared order value must be equal to total store purchases and/or winning auction bids (less any shipping costs, as these are not considered in the declared value). As a result, each customer will be responsible for paying his/her own country taxes, duties and brokerage fees, which will be collected upon delivery. Again, we apologize for these additional costs, but we cannot afford the penalties and fines that come with breaking customs' laws...so we have to strictly abide by them.