If you don't want to wait, pl click
BUY IT NOW
100 level Vibration&Sound
100% Humane & safe: harmless to your dog, NO electric shock
Remote range up to 300 meters
100 levels of vibration
100 levels of strong vibration
Expandable to 2 dogs
Matching Receiver and Transmitter:
1. Install the batteries of the remote - ensure the polarity is correct.
2. Choose channel 1 of the remote, then install the batteries of one collar. Then press the launch botton of the remote to encode. Please install the batteries into the remote at first .Then install batteries in the collar. Press the 'Y ' key on the remote immediately after the collar emits a 'beep' sound, then collar will give you another 'beep' sound which means you got them synchronized. Press UP/DOWN button at the right side of the remote to set level, press the up button begin at 001, or press the down button begin at 100 (Please note: since the remote is power saving, it will turn off automactically if you don't use it for over 3 minutes. You could hold on the mode button for 10 to 40s to wake up the LCD.)
- Length: 68mm Height: 35mm Width: 38mm
- Collar length adjustable from 35cm to 58cm.
- Weight: 60g (module + battery)
- Power: 2 x 1.5V AAA battery (included)
- Length:22mm Height: 128mm Width: 40mm
- Weight: 65g (with battery)
- Power: 2 x 6v batteries (included)
- LED signal light and illumination at night
- The sound function for attracting attention
1. When you press the vibration, please notice the number 1-100, it doesn't work on 000.
2. Please notice the button of 1/2, all the function of the receiver can only work with same number
3. The following situation can not work:
a: The battery no power, please change new battery
b: With wrong frequency, please match the right frequency again.
c. Vibration don't work on 000.
d. Goes into the standby mode, please wake it up
You should often check the battery by hearing the beep from the collar receiver and watching the indicator light on the LCD screen of the transmitter.
The valid distance of remote control means the straight line distance between the transmitter and the collar receiver without obstacles between them. If there are interference source around, the actual remote control distance may vary.
This product is for pet training only, by training, the pet can understand the intention of its owner. Desirable results can only be achieved after a period of training.
Training sessions should be kept positive and short, about 10-15 minutes each time.
1. How to match the frequency?
a: Install the one battery for the collar.
b: You should press vibration button on the remote controller and also put another battery to receiver till vibrate twice. In this way the match is done and the remote control system can operate normally.
2. How to wake up the collar and remote from the standby state?
a: It doesn't work when get into standby state, you should shake the receiver until the indicate lights on. And also press the button of "Mode" for long time, until contents shows on the LCD.
1 x Remote transmitter
1 x collar
2 x 6v batteries
2 x AAA Battereis
1x manual instruction
We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please contact us to resolve any issue before leaving a negative feedback.
1. All payments must be prepaid.
2. We only accept payment via Paypal. Please kindly check if you can do the payment via PayPal before placing an order.
1. We are not responsible for undeliverable address. We reserve the right to
charge the shipping fee again for returned items due to wrong address.
2. Items are generally shipped out the next business day after your payment has been cleared (Sat. & Sun. excluded.)
3. Orders from the AU will be shipped out via AU POST. The shipment usually takes 2-7 business days(Saturday and Sunday excluded), if you need the item urgently, please contact us for detail before purchase.
4. Local pick up is not available.
1. This product has a One-Year warranty.
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. For all returned products, buyers MUST contact us for the returning address.
4. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.