PLEASE NOTE THE POSTAGE TIMES DEPENDS ON HOW FAR THEY NEED TO GO. WA AND QLD NORTHER TERITORY COUNTRY AREAS COULD TAKE UP TO 10 DAYS. IF YOU WANT TO RECEIVE FASTER PLEASE MESSAGE AND WE WILL ORGANISE EXPRESS POST AT A SMALL ADDITIONAL COST.
SIEMENS - VDO DEKA
SPECIAL PRICE WHILE STOCKS LAST AT $44 each
UNDER OUR COST ON THESE
GENUINE SIEMENS DEKA PERFORMANCE FUEL INJECTORS
550CC - 52lb
Siemens VDO DEKA series electronic fuel injectors are designed to produce accurate flow rates and maximum reliability in high performance applications. These injectors flow 52 lbs/hr at 43.5 PSI ( 3 BAR ). Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
Every Siemens VDO racing Injector is made and tested to the highest quality standards in ISO certified facilities.
These injectors are NOT full length injectors, they are 3/4 length and are a direct fit injector for HOLDEN VT TO VY LS1 5.7L but require spacers and wiring plugs so please call us to discus these options.
They are also a direct fit for the new FORD FG XR6 TURBO, and NISSAN SKYLINE R34 models, as 3/4 length 14mm injectors are also required.
Great upgrade for FG F6 TYPHOON as their stock injector is 440cc, so this is the only upgrade injector available at the moment.
We also stock a BOSCH 3/4 length injector that is 440cc, so if 550cc is to big for your application contact us.
THIS BUY IT NOW PRICE IS FOR 8 (EIGHT)
Genuine Siemens DEKA 550cc fuel injectors, (AS PICTURED)
if your require 6 (six) injectors for FORD FG TURBO, or NISSAN SKYLINE R34 application,
please contact us via eBay messages.
We also do wholesale deals, so just ask us for a price on any quantity.
BEST PRICES GARANTEED.
IDEAL UPGRADE FOR:
XR6 Turbo, 4.0L Models: FG
FPV F6, 4.0L Models: FG
LS1 gen3 V8 5.7L, Models: VT TO VY adaptors 'and electrical plugs needed. Call to discus.
V6 LEO/LY7 6cyl 3.6L. Models VZ, VE
Skyline R34 (exept non turbo NEO engines)
The FORD FG TURBO AND SKYLINE R34 use different connector plugs,
however we will supply you with the relevent connector's for your application.
CONTACT US FOR MORE INFO.
Genuine, reliable Siemens Injectors
Excellent response characteristics
Low Impedance performance characteristics with High Impedance Compatibility
Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 52lb/hr = 550 cc/min
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 600KPa
Connector: Bosch MINIMETER (SAME AS EV1, EV6) (USCAR PLUG ALSO AVAILABLE)
Orifice Type: Multi-orifice
Spray Pattern: NARROW CONE 10-15 DEGREES
Factory fitted with Viton upper and lower o-rings
NO driver boxes required!
NO computer modifications required!