Details about TB6600 1 axis Stepper Motor 2-phase Drive Board for CNC Router Beter with TB6560See original listing
10 Aug, 2013 12:59:57 AEST
1/1Feedback on our suggestions
Brand New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read moreabout the condition
TB6600 1 axis Stepper Motor 2-phase Drive Board for CNC Router Beter with TB6560
PWM Chopper-Type bipolar Stepping Motor Driver IC
The TB6600HQ is a
PWM chopper-type single-chip bipolar sinusoidal micro-step stepping motor
TB6600 VS TB6560
The module working voltage is 12~48V. it can used to drive a stepper motor. The stepper motor is suitable for 4.5A 2-phase model.
1. Excitation Settings
mode can be selected from the following eight modes using the M1, M2 and M3
inputs. New excitation mode starts from the initial mode when M1, M2, or M3
inputs are shifted during motor operation. In this case, output current waveform
may not continue.
Note: To change the exciting mode by changing M1, M2, and M3, make sure not to set M1 = M2 = M3 = L or M1 = M2 =M3 = H.
The operation mode
moves to the standby mode under the condition M1 = M2 = M3 = L or M1 = M2 = M3=
2. LATCH Settings
Note: Latch/Auto mean Select a return type for thermal shutdown (TSD) circuit and over-current detection (ISD) circuit., when TSD or ISD is happen, the WARN led will work.
M1 = M2 = M3 = LATCH = ON
M1 = M2 = M3 = LATCH = OFF
3. Output current mode
Shipping & Payment: