Please note: this cover is compatible to fit Utes with or without a tub liner
Suited for Factory style-side tub (not designed to fit larger drop-down side tray types)
Designed for Crewman's fitted with Factory front Sportsbars only (as pictured).
Suits Holden Crewman's Built between 2003 to 2007
We believe our tonneau covers are the highest quality and most long lasting on the market today, at Ute Covers Direct we continually strive to improve our products, with attention to design innovation, material quality and processes refinement. We pay attention to the finer details in all our products that we believe our competitors just simply overlook.
Our success is due to over 20 years of experience in making covers. We also listen to what our customers want from a tonneau cover and strive to make the perfect tonneau, The Ute Covers Direct team go beyond just making tonneau do the job there designed to do, they constantly endeavour to make sure they are the best fit and out last all others.
This dedication to quality enables us to comfortably provide customers with free delivery, 3 year warranty and a 30 Day Money back Guarantee with every tonneau cover.
Tonneau Colour -Top and bottom of the tonneau is a satin black in colour.
No buttons, No Bunji’s, No External Drilling - This tonneau cover just clips onto the rebated grove on the top of the tub sides (the same as factory)
650GSM Rip-stop design -highly tear resistant, lightweight but incredibly strong.
Maximum U.V resistant -designed to last in Australia’s harsh climate, it is the most fade, shrink & crack resistant material we can get. It will still be like new when traditional vinyl covers would have disintegrated.
100% waterproof linen -top and bottom - helps protect your belongings against rain, wind, snow, dew, dirt and leaves.
U.V treated Black thread -U.V Resistant, shrink resistant, rot-proof and has a very strong tensile strength (will not pull apart)
25mm wide release tabs - These extra wide pull tabs are designed to not pull out or break off like the others on the market. Made of the same rip stop tonneau material as the tonneau itself and reinforced into the clipping system means the tonneau is easy to use and will last.
Plastic Clip extrusion sewn into the tonneau -sewn into the sides of the tonneau which enables the tonneau to clip on and off easily. These black plastics are U.V treated and heat resistant given it complete protection from the sun and heat.
Hidden stretch-cord system for higher loads – hidden on the underside of the tonneau is a 6mm thick high tension stretch-cord system with clips. This system is designed to keep your tonneau still attached to all sides with loads higher than the top of Ute tub. These clips attach to the aluminium extrusions provided in the fit kit.
Marine Carpet Lining - Each tonneau has a unique design with the underneath edges lined with High Grade Marine carpet. This carpet has a reinforced hard backing which helps keeps its strength and shape for years. The hard reinforced backing provides extra protection to your paintwork and liners from scratches and marks caused by friction from eyelets and the cover it-self. Our Marine Grade Carpet is a 350gsm tightly woven material and the strongest on the market today. This tight weave resists the ingression abrasive particles into the carpet and therefore minimizes the possibility of damage to your vehicle over time.
Edge Binding -All Edges are finished off perfectly with our high grade tonneau binding material.
Fitting kit includes;
2 X 10mm Adjustable Support Bars -made of Strong Steel and coated in Zinc Gold Passivate, these 3 piece support bars are highly rust and wear resistant. The support bar can be easily adjusted to fit any Ute tub. Adjustable between 1245mm to 1560mm in length. The adjustable support bar consist of two solid end pieces (slightly pitched) and one straight centre tube with a grub screws at each end to fasten the bars in place once adjusted.
2 X Support Bar Protective Sleeve - the protective sleeve is made of our very strong rip-stop tonneau cover material. It is designed to easily slide over the support bar (once assembled) to make a barrier between the metal support bar itself and the tonneau cover. This will reduce the wear and tear of your tonneau cover.
4 x Bar brackets – bar brackets are needed to hold up your support bars. Installing support bars are a must. These support bars are designed to aid water run off your tonneau cover. Not installing them will cause your tonneau to fill up the top with water and may void your warranty, so please install them.
Aluminium Front Header Bar - The tonneau attaches at the front of the tub by using plastic extrusion sewn into the front of the cover. The extrusion then slides into a aluminium header bar that is provided. the header bar then clips into the front of your tub about 100mm from the window. the tonneau cover comes with a magnetic front to help keep your tonneau sitting flush.
Instructions – A Professional installer is not required. With the provided easy to understand, step by step instructions, with pictures, installation is easy and only takes minutes, but if you require assistance our professional staff install them every day and are available to assist you in any way we can.
Tax invoice and 3 year warranty card is also provided with all tonneaus.
3 YEAR MANUFACTURERS WARRANTY
We believe our tonneau covers are of the most superior quality in the market today, this confidence enables us to comfortably provide a 3 year warranty with every tonneau cover
DELIVERY IS FREE AUSTRALIA WIDE!
Our freight company is prompt and convenient for all of our customers. Delivered directly to your front door.
Once your item has been dispatched, we then mark your transaction as posted as well as providing you with a tracking number.
If for any reason your item has been lost or damaged during transport we will supply you with a replacement free of charge, and will deliver your replacement ASAP.
Items will be delivered during normal business hours only (9 am to 5 pm) on weekdays. Delivery is not available on weekends, public holidays or after business hours.
We require a signature upon delivery. Please make sure the address you provide has someone available to receive your item. If no one is available to receive the item, we will leave your item at the front door.
After full payment has been received please allow up to 2 business days for your item to be packed and dispatched.
Delivery normally takes between 2 to 10 business days depending on your location around Australia.
If your item has not been delivered within the estimated time frame please contact us immediately, we will chase it up with the freight company ASAP for you.
It is the Buyers responsibility to provide us with correct and current delivery address in checkout prior to payment.
Items will only be dispatched once full payment and checkout has been cleared.
Please Note: we do not deliver to a P.O Box as parcel is too big for Australia Post to allow, it is the Buyers responsibility to provide us with a valid FIXED ADDRESS ONLY!
If you decide to return your item for a full refund, please contact us to receive a return ID number.
items must be returned within 30 days from the date delivered which is confirmed by our freight company.
Customers will need to pay return postage.
The product must be returned in its original condition including all parts and accessories.
you will NOT be charge any restocking fees for items returned due to freight damages, defects with the product, or not-as-described in the listing.
Accepted returns will be refunded by the method by which you paid.
Refunds will only be issued once product has returned to our premises and item is of resale condition.
Proudly Australian Made and Owned -Manufactured right here in our factory in Mitcham Victoria, by the hard working team at Ute Covers Direct Pty Ltd