Genuine Kirby Vacuum Power Cord (Cable) plus 1 Free Belt!
Check the drop down list for the powercord you want. All of the (G) Generation Series electrical cords can be used with all Generation series vacuums, only the color is different.
120 volt, 2 prong cord
No wiring necessary, just plug in to the vacuum
Check the chart to make sure you are ordering the cord/cable you want.
|Kirby Power Cords
|Sentria, SE, G10 ||2006 - present ||192007 || Gray ||32 ft. |
|Sentria, SE, G10||2006 - present ||183007 || Gray ||50 ft. |
|Diamond Edition, DE, G8, Ultimate G, G7, ULTG ||2002-2006 ||192001 || Twilight ||32 ft. |
| Gsix, G6, G2000, G2001||1999-2002 || 192099 ||Onyx ||32 ft. |
|G5||1996-1999 ||192097 || Cabernet ||32 ft. |
| G4||1993-1996 ||192096 || Stone Gray ||32 ft. |
|Generation 3, G3||1990-1993 ||192092 || Powder Gray ||32 ft. |
|G3, G4, G5, Gsix, G6, G7, G8, Ultimate G, and Diamond Edition||1993 - 2009 ||183099 || Black ||50 ft. |
| Legend II||1989-1990||192088 || |
|32 ft. |
|Heritage I, Heritage II, Legend I, 2HD||1981-1989 ||192084 || Black ||32 ft. |
| Classic Omega, Classic III, Tradition, 3CB, 2CB, and 1CB, 1CR||1970-1981 ||192082 ||Black – The Kirby Co makes this black cord for these models ||32 ft. |
Avoid running over or sucking the cord up with the vacuum. This could create a kink and cause a short in the cord.
Warning: Always look for the Genuine Kirby Products; if not, you might as well buy a broom!
Made To Fit, Off Brands, and Cheap Generic Bags and belts may last only a few months which will contribute to poor brushroll performance.
Some tips for optimum cleaning performance:
• Changing the vacuum belt every year will definitely increase your vacuum brush roll performance.
• Properly adjust your roller brush for extended life. Maintaining the proper brush height is essential for the cleaning effectiveness of your Kirby. This will increase the life of your carpet as well. An average family adjusts the brush roller every two to three years. Tips: Start at number 1 with a new brushroller. Make sure both sides are on the same number. Replace the brushroll/beaterbar every 5-7 years.