Wireless Remote Shutter N1 F Nikon D700 D300 D300S D200 D3 D2X D2H MC-30 Camera

You are bidding on a brand new wireless remote N1 for Nikon D200 D300. It can completely replace the original Nikon MC-30 and have more powerful functions. The product combines the function of remote control and shutter release cable. With this multi-functional wireless remote you can strongly trigger the camera's shutter release from a long effective distance up to 100m (320ft).

Energy Saving Design, Long Working Hour
• With its low voltage and energy saving design, you don't have to change the battery often.
• With a new battery, the receiver standby time is about 1000 hours.
• With a new battery, the remote control can trigger about 20,000 times.

Shutter Release Function: Different from the infrared remote control, this radio-triggered wireless remote has function of shutter release, two modes are available:

A . Half-press the transmitter's button for auto-focus (the LED on both transmitter and receiver turns green), then press it completely for taking picture (the LED turns red).

B . Bulb shutter, setting you camera to Bulb mode, and long press the transmitter's button, bulb starts since the LED turns red, repress when the long-exposure is completed.

Some circumstances to use this Multi-function, high-tech remote :
• Use in family or group, self-portrait or including your children and pets photography.
• Use for macro shooting - eliminates camera shake or in dangerous locations.
• Use in B mode for night piece shooting.
• Use in children photography: grasp a breath when they enjoy their selves.
• Use in wild animal photography and can easily conceal yourselves somewhere else.

Single shooting: Set to On position on receiver (red light on). Half-pressing shutter button on transmitter for focusing (monitor light turns to green). Fully pressing to take photo (monitor lights of transmitter and receiver turn to red) Two seconds delay: Set to 2S position on receiver (red light on). Half-pressing shutter button on transmitter for focusing (both lights turn green) and fully pressing shutter button (light turns red). Camera will take photo in 2 seconds Continuous shooting: Set camera on continuous mode. Set to On position on receiver. Fully press shutter button on transmitter (light on transmitter turns red) for 3 seconds until monitor red light off. The camera operates on C mode. To release C mode, half-pressing the button on transmitter

Bulb mode- for long exposure :

1. Switch the camera to Bulb mode.
2. Press it all the way for 3 seconds until the Red LED on the remote control goes off.
3. The receiver is in bulb mode now. (Indicated by Red LED on the receiver)
4. Press the button again to close the shutter.

Multi-Channels Control: It has strong anti-interference function and has 16 channels for choose. It is extremely useful for several photographers working nearby. Each photographer could choose their own channel to trigger off shutter release of the camera they are going to use without triggering others' because of overlapping signals.

Use receiver as wired remote without transmitter:
Single Shooting: Set switch on receiver to any position of OFF/ON/2S and press shutter button. Or just switching to B position for taking photo

Continuous shooting: Set camera on C mode first. Set switch on receiver to any position of OFF/ON/2S and fully press shutter button. Camera works on C mode until free of your hand. Or you just switch to B position and camera works on C mode until take the switch off B position