• 6X Carbon Fiber Universal Front Bumper Fin Body Spoiler Canards Decor Auto Refit (Fits: 2016 Mazda 2)

    Color: Black Carbon Fiber Pattern ( Not Real Carbon Fiber, it is just the Pattern Printing as pictures ). 6 x Carbon Fiber Spoilers. Clean the trunk and remove any dirt or leftover water. Peel off the double-sided tape, and stick on the trunk lip.
    AU $16.99
    eBay Premium Service
    Free postage
    129 watching
  • 2.5M Carbon Fiber Front Bumper Lip PU Splitter Valance Chin Skirt Protector Trim (Fits: 2016 Mazda 2)

    Color: Carbon Fiber Paint( Not made of real carbon fiber ). 1 x Car Front Bumper Lip Skirt Protector. -To reduce the reversing flow when car driving. At the same time increase the down force of the car to make the car more stable for reducing fuel consumption.
    AU $21.99
    eBay Premium Service
    Free postage
    77 watching
  • 10M Carbon Fiber Vehicle Front Bumper Chin Lips Shirt Spoiler Body Guards Trim (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on Item detail :.
    AU $67.65
    Was: Previous priceAU $79.59
    AU $15.98 postage
    16 watching
  • 10M Blue Carbon Fiber Front Car Bumper Lip Spoiler Body Side Skirt Chin Anti-Rub (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on Item detail :.
    AU $65.95
    Ending Today at 14:19 AEDST56m 33s
    AU $12.99 postage
  • 2.5M Carbon Fiber Universal Car Front Lip Spoiler Bumper Chin Protect Skirt Blue (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on Item detail :.
    AU $24.95
    AU $7.99 postage
  • 16M Car UTE 4X4 4WD Rubber Lip Skirt Bumper Side Guard Carbon Fiber Blue 55mm AU (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion   Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on ​ Feature:  .
    AU $119.99
    AU $15.99 postage
    or Best Offer
  • 2.5M Universal Car Front Bumper Lip Skirt Splitter Body Trim Spoiler Protector (Fits: 2016 Mazda 2)

    Stick it on front or rear bumper, body kit, side skirt, tail fins etc. 1 x Car Bumper Lip. Highly Recommended to have 3 or 4 Unit if you want it for the whole car. Also do not touch waterafter pasting within 72 hours.
    AU $19.99
    eBay Premium Service
    Free postage
    59 sold
  • 55mm Carbon Fiber Blue 5M Vehicle Front Bumper Splitter Lips Body Skirt Protect (Fits: 2016 Mazda 2)

      Before you order ,Please read the listing title for the right application length measure if it sufficient enough for your application area.   Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note:.
    AU $38.99
    Ending Today at 14:19 AEDST56m 33s
    AU $12.99 postage
  • CCD Mini Camera Car Back Off Reverse Parking Rearview HD Night Vision For Mazda (Fits: 2016 Mazda 2)

      Specifications: Newest design, fits Mazda cars Video Color: Colorful (Not infrared imaging type) Image Sensors: 1/4" high quality color CCD TV System: NTSC Minimum illumination: < 0.5 LM Waterproof Rating: IP 67 Resolution: 580TV lines Effective Pixels: 720P Video Output: 1.0Vp-p,75Q S/N ratio: Better Than 48db Electronic Shutter: 1/60-1/10000 Vision Angle: 170° Operation Temperature: -20°C 90°C RH95% Storage Temperature: -40°C 85°C Power Supply: DC 12V Power consumption: Max 300mA With IR On Size: as pic show   Feature:.
    AU $19.99
    eBay Premium Service
    Free postage
    23 watching
  • Mazda 2 3 6 Carbon Fiber Look Front Bumper Lip & Rear Boot Spoiler Lip (Fits: 2016 Mazda 2)

    Carbon fiber look front rear bumper lip side skirt kit. It comes with adhesive backing (3M) to stick underneath front bumper and rear boot. SunlinesAuto prides itself on its reputation as a provider of an exceptional level of service and technical support.
    AU $49.95
    AU $10.00 postage
  • Car Rubber Lip Skirt 45mm Black Front Bumper Guard Side Spoiler Splitter 6.5M OZ (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion   Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on ​ Feature:  .
    AU $55.99
    AU $12.99 postage
    or Best Offer
  • 6X Gloss Black Universal Front Bumper Fin Body Spoiler Canards Decor Auto Refit (Fits: 2016 Mazda 2)

    Color: Black Carbon Fiber Pattern ( Not Real Carbon Fiber, it is just the Pattern Printing as pictures ). 6 x Gloss Black Spoiler s. Clean the trunk and remove any dirt or leftover water. Peel off the double-sided tape, and stick on the trunk lip.
    AU $15.59
    eBay Premium Service
    Free postage
    18 watching
  • 7.5M DIY Car Auto Front Rear Bumper lips Spoiler Protector Side Shirt Sticker AU (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on Item detail :.
    AU $49.89
    AU $13.99 postage
    15 watching
  • 4X Universal Carbon Fiber Car Front Bumper Splitter Fins Spoiler Canard Valence (Fits: 2016 Mazda 2)

    Color: Black Carbon Fiber Pattern ( Not Real Carbon Fiber, it is just the Pattern Printing as pictures ). 4 x Carbon Fiber Spoilers. Clean the trunk and remove any dirt or leftover water. Peel off the double-sided tape, and stick on the trunk lip.
    AU $13.39
    eBay Premium Service
    Free postage
    27 watching
  • 65mm Black Rubber Bumper Lip Skirt Spoiler Under Panel Trim Car Automotive 3M (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion   Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on ​ Feature:  .
    AU $25.99
    AU $9.99 postage
    or Best Offer
  • 45MM x 8M Car Side Bumper Lip Skirt Edging Guard Carbon Fiber Paint Universal AU (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion   Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on ​ Feature:  .
    AU $66.99
    AU $12.99 postage
    or Best Offer
  • Universal Car Body Kit Lip Skirt Protector Front Rear Bumper Spoiler 6.5M x 60mm (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion   Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on ​ Feature:  .
    AU $65.99
    AU $12.99 postage
    or Best Offer
  • Carbon Fiber Car SUV Front Bumper Chin Splitter Side Skirt Extension Lips 5Meter (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on Item detail :.
    AU $39.99
    AU $12.99 postage
  • 2.5M Vechicle Front Lip Splitter Rear Bumper Spoiler Chin Carbon Fiber Black DIY (Fits: 2016 Mazda 2)

    Hot! Carbon Fiber Front Lip Splitter ,Aussie Seller !!!
    AU $17.95
    AU $7.99 postage
    59 sold
  • Blue 55mm Wide Carbon Fiber Vehicle Bumper Lips Splitter Chin Protector 1.5Meter (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on Item detail :.
    AU $19.98
    eBay Premium Service
    Free postage
  • 2.5M Vehicle Lip Splitter Front Rear Bumper Skirt Chin Guards Protective Sticker (Fits: 2016 Mazda 2)

    Full black Car Front Lips Spoiler Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on   Item detail :.
    AU $28.89
    eBay Premium Service
    Free postage
  • RHINOLIP Rubber Front Bumper Lip Splitter Spoiler Skirt Protector (Fits: Mazda) (Fits: 2016 Mazda 2)

    Do not want to crack/scratch your expensive bumper but still want to look lower?. Rhino Lip gives your vehicle a more aggressive look in a cheaper way. You can put it on your front bumper, side skirt and rear bumper.
    AU $33.00
    AU $9.00 postage
    or Best Offer
  • 1M 45mm Width Carbon Fiber Universal Front Lips Spoiler Bumper Chin Skirt Black (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on Item detail :.
    AU $18.69
    eBay Premium Service
    Free postage
    27 watching
  • 45mm Width Universal Car Side Skirt Extension Lips Spoiler Scratch Resistance 2M (Fits: 2016 Mazda 2)

    Full black Car Front Lips Spoiler Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on   Item detail :.
    AU $16.99
    AU $7.99 postage
    19 watching
  • 3M Carbon Fiber Blue Auto Side Skirt Extension Bottom Bumper Lips Chin 55mm Wide (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on Item detail :.
    AU $29.98
    AU $7.99 postage
    15 watching
  • Car Lips Splitter Bottom Bumper Guards Chin Spoiler 4.5M Carbon Fiber Look Black (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on Item detail :.
    AU $29.99
    AU $12.99 postage
  • 45mm Wide Carbon Fiber Black Car Front Bottom Bumper Lip Chin Skirt Spoiler 1.8M (Fits: 2016 Mazda 2)

    Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on Item detail :.
    AU $15.99
    AU $7.99 postage
  • Wide 45mm Black Crashproof Universal Car Bumper Lips Spoiler Protector Chin 1.3M (Fits: 2016 Mazda 2)

    Full black Car Front Lips Spoiler Instructions tips 1. Determine the installation location, clean with a clean-up agent. 2. Remove the back glue gradually 3. Cut a few corners to facilitate the triangular space before the corner. 4. Cut off the excess part after paste finished and hard pressed strip. We suggest use the screw it on the car so that it can be better adhesion Note: After pasting, do not touch water within 72 hours. When the temperature below 20 degrees that adhesiveness is weaker, It is important to heat this with a hair dryer,before putting on Item detail :.
    AU $12.99
    AU $7.99 postage
  • Bumper Spoiler Chin kit Lip Skirts Protector for Mazda 2 3 6 CX3 CX5 MX5 BT50 (Fits: 2016 Mazda 2)

    ● Easy to install and never lose after using for long time. ● Buy is responsible for Duty. ● 1 X SPOILTER PROTECTOR. ● Can paint the color you like on this Bumpers to match your car. ● Order will be cancelled for any delays.
    AU $35.99
    From China
    Free postage
    24 watching
  • 50 Sets 4mm Bullet Automobile Crimp Terminal Wire Connectors w/Insulation Sheath (Fits: 2016 Mazda 2)

    (Jacket with Insulation Sheath. -Insulation Sheath Color : Transparent. Connector 1 x Male Sheath 1 x Female Sheath). -Material : Copper ( Tin Plated ). -Units : Set.
    AU $8.88
    eBay Premium Service
    Free postage
    From China
  • 2x59" Carbon Fiber Car Fender Flares Extension Wheel Eyebrow Protector Trim Lip (Fits: 2016 Mazda 2)

    Note: 2 Piece Fender Flares Protector only enough to install two wheels. Clean the trunk and remove any dirt or leftover water. Peel off the double-sided tape, and stick on the trunk lip. 2x4.9ft Car Wheel Fender Sticker Lip.
    AU $28.99
    eBay Premium Service
    Free postage
    From Hong Kong
  • 2"x100" Red Universal Carbon Fiber Front Bumper Lip Splitter Spoiler Body Trim (Fits: 2016 Mazda 2)

    Color: Carbon Fiber Paint( Not made of real carbon fiber ). -To reduce the reversing flow when car driving. At the same time increase the down force of the car to make the car more stable for reducing fuel consumption.
    AU $26.69
    eBay Premium Service
    Free postage
    From Hong Kong
  • Car Hose Clip Pliers Click R Collar Clamp Swivel Drive Shafts Angle Clamp Tool (Fits: 2016 Mazda 2)

    Tips trap and hold clamp and swivel for multiple angle access. Special jaws allow the change from fit to remove (and back again) simply by turning the pliers over in your hand. Heavy duty spring loaded pliers for fitting and removing Clic and Clic R hose Clips.
    AU $18.99
    From China
    Free postage
    or Best Offer
  • 2x4.9ft Universal Carbon Fiber Car Fender Flares Wheel Protector Lip Sticker (Fits: 2016 Mazda 2)

    2 X 4.9ft Car Wheel Fender Sticker Lip. Note: 2 Piece Fender Flares Protector only enough to install two wheels. Color: Black Carbon Fiber. Clean the trunk and remove any dirt or leftover water. Peel off the double-sided tape, and stick on the trunk lip.
    AU $34.99
    eBay Premium Service
    Free postage
    From Hong Kong
  • 2.5M Carbon Fiber Front Bumper Lip Splitter Spoiler Skirt Valance Chin Protector (Fits: 2016 Mazda 2)

    Color: Carbon Fiber Paint( Not made of real carbon fiber ). 1 x Car Front Bumper Lip Skirt Protector. -Rubber products had just leave factory will have peculiar smell, which belongs to the normal situation.
    AU $26.69
    eBay Premium Service
    Free postage
    From Hong Kong
  • Universal ABS Racing V-Shape Car/Auto Bumper Trailer Tow Hook Decoration Sticker (Fits: 2016 Mazda 2)

    1 x Decoration Racing Tow Hook. Stick Towing Hook on the surface by self-adhesive tape(Tattached on backside). Clean up the surface where you want to stick this product. - Easy to install: simply remove the double-sided tape on the back and apply to any smooth surface such as the front or rear bumper.
    AU $6.99
    eBay Premium Service
    Free postage
    From Hong Kong
  • 9.8ft Black Universal Car Fender Flares Wheel Eyebrow Trim Protector Sticker Lip (Fits: 2016 Mazda 2)

    Note: 1 Piece Fender Flares Protector only enough to install two wheels. 2x4.9ft Car Wheel Fender Sticker Lip. Clean the trunk and remove any dirt or leftover water. Peel off the double-sided tape, and stick on the trunk lip.
    AU $24.99
    eBay Premium Service
    Free postage
    From Hong Kong
  • 2.5"x100" Universal Car Front Bumper Lip Skirt Splitter Body Spoiler Protector (Fits: 2016 Mazda 2)

    Stick it on front or rear bumper, body kit, side skirt, tail fins etc. 1 x Car Bumper Lip. Style: Black side skirts/Front Bumper/Rear Bumper valance. Highly Recommended to have 3 or 4 Unit if you want it for the whole car.
    AU $18.69
    eBay Premium Service
    Free postage
    From Hong Kong
  • 2.5M Blue Carbon Fiber Front Bumper Lip Splitter Spoiler Skirt Valance Protector (Fits: 2016 Mazda 2)

    Color: Carbon Fiber Paint( Not made of real carbon fiber ). 1 x Car Front Bumper Lip Skirt Protector. -To reduce the reversing flow when car driving. At the same time increase the down force of the car to make the car more stable for reducing fuel consumption.
    AU $26.69
    eBay Premium Service
    Free postage
    From Hong Kong
  • 4pcs-72cm Universal Carbon Fiber Fender Flare Protector Car Auto Wheel Body Lip (Fits: 2016 Mazda 2)

    4 x Carbon Fiber Fender Lip. Universal fit for most of cars. Material:Soft PVC Plastic WithCarbon Fiber Surface ( Not Real ). Come with Free Gift 1pc Double Faced Adhesive Tape ( Width: 0.8cm ). Note: Due to lighting effect, monitor's brightness etc, there could be some slight differences in the colour between the photo and the actual item.
    AU $19.69
    eBay Premium Service
    Free postage
    From Hong Kong
  • 2x4.9ft Black Universal Car Fender Flares Wheel Eyebrow Lip Protector Sticker (Fits: 2016 Mazda 2)

    2 X 4.9ft Car Wheel Fender Sticker Lip. Note: 2 Piece Fender Flares Protector only enough to install two wheels. Clean the trunk and remove any dirt or leftover water. Peel off the double-sided tape, and stick on the trunk lip.
    AU $31.99
    eBay Premium Service
    Free postage
    From Hong Kong
  • Blue Universal ABS V-Shape Racing Car Bumper Trailer Tow Hook Decoration Sticker (Fits: 2016 Mazda 2)

    1 x Decoration Racing Tow Hook. Stick Towing Hook on the surface by self-adhesive tape(Tattached on backside). Clean up the surface where you want to stick this product. - Easy to install: simply remove the double-sided tape on the back and apply to any smooth surface such as the front or rear bumper.
    AU $6.99
    eBay Premium Service
    Free postage
    From Hong Kong
  • Car Hose Clip Pliers Click R Collar Clamp Swivel Drive Shafts Angle Clamp Tool (Fits: 2016 Mazda 2)

    Tips trap and hold clamp and swivel for multiple angle access. Special jaws allow the change from fit to remove (and back again) simply by turning the pliers over in your hand. Heavy duty spring loaded pliers for fitting and removing Clic and Clic R hose Clips.
    AU $18.04
    From China
    Free postage
    or Best Offer
  • 2pcs-72cm Universal Carbon Fiber Fender Flare Protector Car Auto Wheel Body Lip (Fits: 2016 Mazda 2)

    2 x Carbon Fiber Fender Lip. Universal fit for most of cars. Material:Soft PVC Plastic WithCarbon Fiber Surface ( Not Real ). Come with Free Gift 1pc Double Faced Adhesive Tape ( Width: 0.8cm ). Note: Due to lighting effect, monitor's brightness etc, there could be some slight differences in the colour between the photo and the actual item.
    AU $10.29
    eBay Premium Service
    Free postage
    From Hong Kong
  • 6X Universal Carbon Fiber Front Bumper Body Fins Spoiler Canards Auto Refit Kit (Fits: 2016 Mazda 2)

    Color: Black Carbon Fiber Pattern ( Not Real Carbon Fiber, it is just the Pattern Printing as pictures ). 6 x Carbon Fiber Spoilers. Clean the trunk and remove any dirt or leftover water. Peel off the double-sided tape, and stick on the trunk lip.
    AU $10.99
    eBay Premium Service
    Free postage
    From Hong Kong
  • Gold Universal ABS V-Shape Racing Car Bumper Trailer Tow Hook Decoration Sticker (Fits: 2016 Mazda 2)

    1 x Decoration Racing Tow Hook. Stick Towing Hook on the surface by self-adhesive tape(Tattached on backside). Clean up the surface where you want to stick this product. - Easy to install: simply remove the double-sided tape on the back and apply to any smooth surface such as the front or rear bumper.
    AU $6.99
    eBay Premium Service
    Free postage
    From Hong Kong
  • 4pcs-42cm Carbon Fiber Trim Fender Flare Protector Car Auto Wheel Body Lip Decor (Fits: 2016 Mazda 2)

    4 x Carbon Fiber Fender Lip. Material:Soft PVC Plastic WithCarbon Fiber Surface ( Not Real ). Length: Approx 42cm. We will try our best to reduce the risk of the custom duties.
    AU $12.29
    eBay Premium Service
    Free postage
    From Hong Kong
  • Car Hose Clip Pliers Click R Collar Clamp Swivel Drive Shafts Angle Clamp Tool (Fits: 2016 Mazda 2)

    Tips trap and hold clamp and swivel for multiple angle access. Special jaws allow the change from fit to remove (and back again) simply by turning the pliers over in your hand. Heavy duty spring loaded pliers for fitting and removing Clic and Clic R hose Clips.
    AU $18.04
    From China
    Was: Previous priceAU $18.99
    Free postage
    or Best Offer
Got one to sell?

Got one to sell?

Get it in front of 160+ million buyers.

Tell us what you think - opens in new window or tab