EKWB Tubing Computer Water Cooling Equipment

Maximum tubing OD: 30mm(3830046994585). The tool is used to remove the remains of freshly cut Acrylic, PETG, copper, aluminum, brass, carbon fiber, etc. tubing. - Minimum tubing ID: 5mm. Main Specifications.

EK-HD Tube is solid type extruded acrylic tubing intended to be used withEK-HD Adapter fittings.

Length: 500 mm (19.5") EK Water Blocks EK-HD Tube 10/12mm 500mm (2 pcs). We are here to help!

Installed height: 11mm EK-HD Adapter is a solid-tube fitting, intended to be used with solid tubing such as Acrylic or Copper tube. - supported tube: 16mm (OD). We are here to help! Technical data.

Color: Black EK Water Blocks EK-HDC Fitting 16mm G1/4 - Black. We are here to help! General Interest.

EKWB EK-HDC Fitting 12mm G1/4 - Red - a solid-tube compression fitting, designed for use with solid tubing such as Acrylic, Copper, Stainless Steel or any other type of compatible hard tubeEK-HDC Fitting is a solid-tube compression fitting, designed for use with solid tubing such as Acrylic, Copper, Stainless Steel or any other type of compatible hard tube.EK-HDC Fitting is a more secure variant of the EK-HD Adapter fitting as it prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring.The barb is made of black nickel-plated CNC machined brass while the ring is made of red anodized CNC machined aluminum and feature quality O-rings. These fittings are fully compatible with EK-CSQ series (45°/90°) angled adapters.

EKWB EK-ACF Fitting 10/16mm - White - soft-tube compression fitting, designed for use with flexible soft tubing such as PVC, EPDM, Norprene, silicone or any other type of compatible flexible tubeEK-ACF Fitting (Advanced Compression Fitting) is a soft-tube compression fitting, designed for use with flexible soft tubing such as PVC, EPDM, Norprene, silicone or any other type of compatible flexible tube.EK-ACF Fitting is a more secure variant of the tubing fitting connector as the locking ring prevents flexible tube to be pulled out of the fitting by compressing the tubing wall underneath the ring. Such fitting does not require any hose clamp or similiar substitute.

Do not use excessive force when inserting solid tube!

EKWB EK-HD Tube 10/12mm 500mm (2 pcs) - solid type extruded acrylic tubing intended to be used with EK-HD Adapter fittingsEK-HD Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only!It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0,5mm x 45° chamfer.

EKWB EK-HD Tube ReamerThe EK-HD Tube Reamer is an external and internal tube reamer. The tool is used to remove the remains of freshly cut Acrylic, PETG, copper, aluminum, brass, carbon fiber, etc. tubing. Suitable for tubes with a minimum inner diameter of 5mm and maximum outer diameter of 30mm.- Plastic body- Steel blades- Minimum tubing ID: 5mm- Maximum tubing OD: 30mm

EKWB EK-HD Tube D.I.Y. Kit 10&12mm - Do-It-Yourself modification kit for solid acrylic tubing with Ø10- and Ø12mm in inner diameterEK-HD Tube D.I.Y. Kit 10&12mmEK-HD Tube D.I.Y. Kit 10&12mm is a Do-It-Yourself modification kit for solid acrylic tubing with Ø10- and Ø12mm in inner diameter (ID).Using heat gun and the enclosed silicone cord (rod) it is possible to make customized pieces of solid tubing. Use hacksaw to cut pieces to lenght and sandpaper to chamfer and smooth out the edges.

Do not use excessive force when inserting solid tube!

Do not use excessive force when inserting solid tube!

EKWB EK-HDC Fitting 12mm G1/4 - Green - a solid-tube compression fitting, designed for use with solid tubing such as Acrylic, Copper, Stainless Steel or any other type of compatible hard tubeEK-HDC Fitting is a solid-tube compression fitting, designed for use with solid tubing such as Acrylic, Copper, Stainless Steel or any other type of compatible hard tube.EK-HDC Fitting is a more secure variant of the EK-HD Adapter fitting as it prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring.The barb is made of black nickel-plated CNC machined brass while the ring is made of red anodized CNC machined aluminum and feature quality O-rings. These fittings are fully compatible with EK-AF series (45°/90°) angled adapters. 

Do not use excessive force when inserting solid tube!

Do not use excessive force when inserting solid tube!

EKWB EK-ACF Fitting 13/19mm - White - soft-tube compression fitting, designed for use with flexible soft tubing such as PVC, EPDM, Norprene, silicone or any other type of compatible flexible tubeEK-ACF Fitting (Advanced Compression Fitting) is a soft-tube compression fitting, designed for use with flexible soft tubing such as PVC, EPDM, Norprene, silicone or any other type of compatible flexible tube.

EK-HD Tube is solid type extruded acrylic tubing intended to be used withEK-HD Adapter fittings.

Check the EKWB website for more information.

Check the EKWB website for more information.

In any professional Liquid Cooling System seal integrity is of the utmost importance. In order to remove a clamp, simply twist the two interlocking teeth sections so that they no longer line up and the clamp will unlock itself.

The EK-KIT HT240 is a complete hard tubing liquid cooling kit dedicated to users who seek top performing market proven components with versatile case compatibility in focus. Designed for cases with limited radiator space in mind, the HT kit is a great choice for liquid cooling enthusiasts who are looking for a complete high-performance hard tubing cooling solution.

EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only!

EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only!

EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only!

EK Water Blocks EK-KIT HT240 Hard Tubing Performance Watercooling Kit (3831109891100) - 3831109891100. The EK-KIT HT240 is a complete hard tubing liquid cooling kit dedicated to users who seek top performing market proven components with versatile case compatibility in focus.

Length 2 x 500mm Tubes. Manufacturer EK Waterblocks. EK-HD Tube is solid type extruded acrylic tubing intended to be used with EK-HD Adapter fittings. (other 10/12mm Rigid tubing fittings will also work).

EK Water Blocks EK-KIT HT360 Hard Tubing Performance Watercooling Kit (3830046996237) - 3830046996237. The EK-KIT HT360 is a complete hard tubing liquid cooling kit dedicated to users who seek top performing market proven components with versatile case compatibility in focus.

Closed-cell insulation material. - Due to the loose fit it may be stretched over the hand-grip mounting nut. Buy now for £1.99. Suitable for EK-SF3D Inflection Point EVO pot.

Unlike the matte black EK ZMT Tube, EK-DuraClear is "glass-like" transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.

Unlike the matte black EK ZMT Tube, EK-DuraClear is "glass-like" transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.

EK-RES X3 - Internal Tube 12/16 40mm is an upgrade tube for EK-RES X3 - Multiport TOP which further expands the use of EK-RES X3 series reservoirs. These tubes, which are sealed with quality NBR rubber gasket, allow the ports on EK-RES X3 - Multiport TOP to be used as an outlet (suction) ports as well.

EK-HD PETG Clear Tube 1012mm 500mm (2pcs) EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.

EK-HDC Fitting 12mm G1/4 - Black EK-HDC Fitting is a solid-tube compression fitting, designed for use with solid tubing such as Acrylic, Copper, Stainless Steel or any other type of compatible hard tube.

Unlike the matte black EK ZMT Tube, EK-DuraClear is "glass-like" transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.

Using heat gun and the enclosed silicone cord (rod) it is possible to make customized pieces of solid tubing. Use hacksaw to cut pieces to lenght and sandpaper to chamfer and smooth out the edges. - 1x silicone cordØ11.7mm (L=33cm).

EK ZMT (Zero MaintainanceTubing) is a high quality. EK ZMT (Zero Maintainance Tubing) is a high quality, zero maintainance industrial grade EPDM rubber tubing in stylish matte black. Unlike most PVC and PUR tubing this high quality EK made EPDM rubber tubing ensures long lasting operation and does not suffer from plasticizer leaching effect which can cause blockage (gunking) in your liquid cooling loop.

Lenght: 104mm. May be use to upgrade or replace the tube on any of the following EK products - Not compatible with EK-Multioption RES X2 series reservoir! - EK-RES X3. - Material: acrylic glass. - EK-D5 Dual TOP G1/4 CSQ in conjuction with EK-D5 X-RES LINK CSQ.

EK-HDC Fitting 12mm G1/4 - Red EK-HDC Fitting is a solid-tube compression fitting, designed for use with solid tubing such as Acrylic, Copper, Stainless Steel or any other type of compatible hard tube.

EK-HDC Fitting 12mm G1/4 - Black Nickel EK-HDC Fitting is a solid-tube compression fitting, designed for use with solid tubing such as Acrylic, Copper, Stainless Steel or any other type of compatible hard tube.

Unlike the matte black EK ZMT Tube, EK-DuraClear is "glass-like" transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.

Unlike the matte black EK ZMT Tube EK-DuraClear is "glass-like" transparent tube designed to be used with EK-Ekoolant cooling liquids. Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.

Unlike the matte black EK ZMT Tube, EK-DuraClear is "glass-like" transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.

EK-HDC Fitting 12mm G1/4 - Nickel EK-HDC Fitting is a solid-tube compression fitting, designed for use with solid tubing such as Acrylic, Copper, Stainless Steel or any other type of compatible hard tube.

Unlike the matte black EK ZMT Tube, EK-DuraClear is "glass-like" transparent tube, designed to be used with EK-Ekoolant cooling liquids. Colored liquid realy gives your build a touch of personality and there is nothing more beautiful than matching colors of liquid with your hardware.

EK-HDC Fitting 12mm G1/4 - White EK-HDC Fitting is a solid-tube compression fitting, designed for use with solid tubing such as Acrylic, Copper, Stainless Steel or any other type of compatible hard tube.

EK-HDC Fitting 12mm G1/4 - Blue EK-HDC Fitting is a solid-tube compression fitting, designed for use with solid tubing such as Acrylic, Copper, Stainless Steel or any other type of compatible hard tube.

EK-HDC Fitting 16mm G1/4 - White EK-HDC Fitting is a solid-tube compression fitting, designed for use with solid tubing such as Acrylic, Copper, Stainless Steel or any other type of compatible hard tube.

EK-HD PETG Tube 1216mm 500mm (2pcs) EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.

Manufacturer: EKWB. To eliminate this problem, EK-DuraClear has very smooth inner walls that prevent any kind of bacterial adhesion. One of the most important features that the soft tube should have is the flexibility and good bend ratio without kinks.

EK-ACF Fitting is a more secure variant of the tubing fitting connector as the locking ring prevents flexible tube to be pulled out of the fitting by compressing the tubing wall underneath the ring. Such fitting does not require any hose clamp or similar substitute.

Manufacturer: EKWB. EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.

Manufacturer: EKWB. To eliminate this problem, EK-DuraClear has very smooth inner walls that prevent any kind of bacterial adhesion. One of the most important features that the soft tube should have is the flexibility and good bend ratio without kinks.

Click here to see description.

Click here to see description.