Gaugemaster HO Scale Model Train Locomotives

Cut out and apply.

Back EMF: Adjustment free Back EMF ability that will give perfect low speed control. Functions: The decoder has 4 functions which can be remapped, and are switched on and off via the function control buttons on your digital handset.

The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog points is recommended on digital layouts to ensure reliability but this can make extra switching more complicated than it needs to be.

A 6 Pin decoder with plug-able 8 pin harness. This very versatile 2 function decoder is very small so it can fit in most locomotives regardless of space. This is regardless of fault or outcome. Harness Length = 55mm.

Drive rod 41mm long. They are NOT therefore the real item itself, simply a Scale model.

The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog points is recommended on digital layouts to ensure reliability but this can make extra switching more complicated than it needs to be.

Requiring only a small slot to operate the point. Suitable to operate Hornby, Peko etc HO/OO Points from BELOW your baseboard. For DCC Operation use with a suitable DCC Decoder eg Hornby Accessory Decoder R8247 or TrainTech Quad Point Controller.

A really versatile 4 function, 1amp (1.8amp max) decoder for use with locomotives that have 8 Pin or 21 Pin sockets. Measures 23 (L) x 27 (W) x 10mm (D). Picture shows it with an 8 pin plug. To use for 21 pin Locomotives simply remove and turn around the harness, reinsert and it plugs into a 21 pin socket so ideal for Hornby 8 pin or Bachmann 21 pin decoders.

Connection is quick and easy via the pre wired crocodile clips. Allow the Cleaner to do the rest for you. Run forward and reverse and gently hold the loco down towards the sponge with a little downward pressure to give a more intense clean.

DCC allows you to run many different locomotives and accessories at the same time from one controller. The Prodigy Wireless Walkaround supports 28 locomotive decoder functions, so is ideal for locomotives with sound and lights.

DCC allows you to run it anywhere on your railway at the same time as other trains are moving as well. You can operate points (individually or route set) and signals from the Walkaround. PRODIGY ADVANCE2 consists of three elements.

This is regardless of fault or outcome. Designed with easy installation in mind, it has a built inreversible mounting plate (with adjustment slots and holes), robust, plated metalwork and fibreglass PCBs for longer life.

Requiring only a small slot to operate the point. Suitable to operate Hornby, Peko etc HO/OO Points from BELOW your baseboard. For DCC Operation use with a suitable DCC Decoder eg Hornby Accessory Decoder R8247.

Stainless steel tweezers with glass magnifier. They are NOT therefore the real item itself, simply a Scale model.

Digital Surface Mounted Point Motor. The back of the Accessory decoder is fitted with a self adhisive pad so it can be stuck on a board during installation. They are NOT therefore the real item itself, simply a Scale model.

This is regardless of fault or outcome. Designed with easy installation in mind, it has a built inreversible mounting plate (with adjustment slots and holes), robust, plated metalwork and fibreglass PCBs for longer life.

A fine oil ideal for models featuring a needle-type applicator for precision oiling. Suitable for Locomotives of all Scales. They are NOT therefore the real item itself, simply a Scale model.

This decoder is for use with locomotives that have Next18 sockets. They are NOT therefore the real item itself, simply a Scale model. Width: 10mm. Number of Pins: 18.