• New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino BB

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • Headset Earphones Nokia HS-3 White Stereo Handsfree

    Nokia HS-3 White Stereo Handsfree In Ear Headset Earphones. In very good conditions. Compatible with most Nokia pop-port phones.
    AU $9.99
    Brand: Nokia
    AU $3.50 postage
    or Best Offer
  • NEW BELKIN F8M668BT04-BLK 2.1A CAR CHARGER WITH MICRO USB CABLE.b.

    » Warranty: Manufacturers warranty. » Pick-up: is available for this item. » Cubic Weight (kg) » Actual Weight (kg): 0.08. » Manufacturer Part Number: F8M668BT04-BLK.
    AU $57.10
    Free postage
    eBay Premium ServiceBrand: Belkin
  • NEW 100-97600000-40 JABRA STEEL BLUETOOTH HEADSET BLACK.b.

    IF YOU SIMPLY CHANGE YOUR MIND OR MAKE A WRONG SELIECTION --. » Warranty: Manufacturers warranty. » Actual Weight (kg): 0.16. » Manufacturer Part Number: 100-97600000-40. » Pick-up: is available for this item.
    AU $145.65
    Free postage
    eBay Premium ServiceBrand: Jabra
  • New listingNew 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino CY

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $4.64
    Free postage
    Save up to 6% when you buy more
  • NEW PANZERGLASS 6759 NOKIA 8 SIROCCO SCREEN PROTECTOR.b.

    » Manufacturer Part Number: 6759. » Warranty: Manufacturers warranty. » Cubic Weight (kg) » Actual Weight (kg): 0.07. » Pick-up: is available for this item.
    AU $46.80
    Free postage
    eBay Premium Service
  • Nokia 2002-2007 HS-3 White pop port Handsfree Headset Earphones earbuds 0274576

    Original OEM Nokia HS-3 White Handsfree pop-port dynamic "stereo fashion Headset" Earphones earbuds. Built-in on-cable microphone. Tangle-free braided lines with answer/end switch. Bonus original carry sachet.
    AU $20.00
    Brand: Nokia
    Free postage
    or Best Offer
  • Nokia 6101 / 6103 accessory pack

    Go o d L uckB idd ing.
    AU $18.80
    Brand: Nokia
    Free postage
  • LCD Module Blue Backlight Adapter PCB For Nokia 5110 LCD Arduino High Quality

    84x48 Pixel LCD Module White Backlight Adapter Led PCB For Nokia 5110 Arduino. Nokia 5110 LCD Module X 1. PCB Size: 45 (mm) x 45 (mm). 4-board LED, white backlight, light uniformity. RST - Reset. The corners were positioning holes, along with two rows of the upper and lower connection port, ranked as follows.
    AU $4.59
    From China
    Free postage
    Save up to 8% when you buy more
  • LCD Screen Display Module White Backlight adapter PCB 3V-5V for Nokia 5110

    PCB Size:4.3 4.50cm/1.69" 1.77". And due to the difference between different monitors, the picture may not reflect the actual color of the item. Also note that monitor settings may vary from computer to computer and may distort actual colors.
    AU $1.19
    From China
    AU $1.99 postage
  • Suited Ear Piece Earpiece Speaker for Nokia 5800

    Description:You will need this replacement Nokia 5800 Earpiece if your phone is having problems with sound distortion or cannot hear the other person on phone, etc.Made of quality materials, ideal for replacing the non working or damaged Nokia 5800 Ear Speaker.Precise molded Nokia 5800 Speaker fits your phone perfectly!It is compatible with Nokia 5800.This is a non-OEM generic product.Accessory ONLY, phone not included.Size: Perfect fit.Weight: 2gInstallation guide not included, please be sure you know how to install before bid.Package Included:1 x Nokia 5800 Ear Piece.
    AU $3.97
    From Hong Kong
    Free postage
  • Suited Replacement Ear Piece Speaker for Nokia N82

    Description:You will need this replacement Nokia N82 Earpiece if your phone is having problems with sound distortion or cannot hear the other person on phone, etc.Made of quality materials, ideal for replacing the non working or damaged Nokia N82 Ear Speaker.Precise molded Nokia N82 Speaker fits your phone perfectly!It is compatible with Nokia N82.This is a non-OEM generic product.Accessory ONLY, phone not included.Size: Perfect fit.Weight: 2gInstallation guide not included, please be sure you know how to install before bid.Package Included:1 x Nokia N82 Ear Piece.
    AU $4.31
    From Hong Kong
    Free postage
  • LCD Display Module White Backlight LCD with PCB for Nokia 5110 Arduino x 1

    84x48 Pixel LCD Module White Backlight Adapter Led PCB For Nokia 5110 Arduino. Nokia 5110 LCD Module X 1. PCB Size: 45 (mm) x 45 (mm). 4-board LED, white backlight, light uniformity. NOKIA5110 FOR PIC (picc).
    AU $4.63
    From China
    Free postage
    Save up to 5% when you buy more
  • 84*48 LCD Display Screen Module Red Backlight Adapter for Nokia 5110 STM32

    Nokia 5110 FOR STM32 (keil for arm). - Nokia 5110 FOR 51 (keil c). - Nokia 5110 FOR PIC (picc). - Nokia 5110 FOR AVR (gcc). - Nokia 5110 FOR MSP430. - Nokia 5110 FOR LPC2148. - RST - Reset. 1x LCD Module.
    AU $4.85
    eBay Premium Service
    Free postage
    From ChinaBrand: Unbranded/Generic
  • LCD Module White Backlight Adapter PCB For Nokia 5110 Arduino 84*48 84x48 New

    1.RST--------- reset. Backlight: White. Use serial interface communicate with the master processor, the number of interface signal line reduced greatly, only 8 signal lines including power and GND.
    AU $1.98
    From China
    AU $1.75 postage
    591 sold
  • 84x48 Pixel LCD Module White Backlight Adapter Led PCB For Nokia 5110 Arduino

    Nokia 5110 LCD Module X 1. PCB Size: 45 (mm) x 45 (mm). 4-board LED, white backlight, light uniformity. RST - Reset. The corners were positioning holes, along with two rows of the upper and lower connection port, ranked as follows.
    AU $4.61
    From China
    Free postage
    Buy 2, get 1 6% off
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino TF

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino 6KY

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $4.73
    Free postage
    Save up to 6% when you buy more
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino BB

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New listingNew 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino AZ

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino BB

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $5.92
    Free postage
    Save up to 5% when you buy more
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino YW

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $4.42
    Brand: Unbranded/Generic
    Free postage
    Save up to 6% when you buy more
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino HJ

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino HJ

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino PL

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino AZ

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $5.07
    Brand: Unbranded/Generic
    Free postage
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino GA

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $4.86
    Free postage
    Save up to 6% when you buy more
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino RY

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $4.46
    Brand: Unbranded/Generic
    Free postage
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino MN

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino HJ

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino PL

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino 8JV

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino BB

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $4.68
    Brand: Unbranded/Generic
    Free postage
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino ER

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino BG

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $5.70
    Brand: Unbranded/Generic
    Free postage
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino MJ

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino JU

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $4.46
    Brand: Unbranded/Generic
    Free postage
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino QW

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino GA

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $5.01
    Free postage
    Save up to 5% when you buy more
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino BB

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $5.42
    Free postage
    Save up to 5% when you buy more
  • LCD Module Blue Backlight Adapter PCB For Nokia 5110 LCD High Quality x 1

    Nokia 5110 LCD Module X 1. 84x48 Pixel LCD Module White Backlight Adapter Led PCB For Nokia 5110 Arduino. PCB Size: 45 (mm) x 45 (mm). 4-board LED, white backlight, light uniformity. RST - Reset. The corners were positioning holes, along with two rows of the upper and lower connection port, ranked as follows.
    AU $4.61
    From China
    Free postage
  • ON SALE LCD Module White backlight PCB Nokia 5110 Arduino LCD Disply Module.

    84x48 Pixel LCD Module White Backlight Adapter Led PCB For Nokia 5110 Arduino. Nokia 5110 LCD Module X 1. PCB Size: 45 (mm) x 45 (mm). 4-board LED, white backlight, light uniformity. The corners were positioning holes, along with two rows of the upper and lower connection port, ranked as follows.
    AU $4.59
    From China
    Free postage
    Save up to 7% when you buy more
  • LCD Module White backlight PCB Nokia 5110 Arduino LCD Disply Module x 1

    84x48 Pixel LCD Module White Backlight Adapter Led PCB For Nokia 5110 Arduino. Nokia 5110 LCD Module X 1. PCB Size: 45 (mm) x 45 (mm). 4-board LED, white backlight, light uniformity. The corners were positioning holes, along with two rows of the upper and lower connection port, ranked as follows.
    AU $4.59
    From China
    Free postage
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino RR

    Features:1. 84*48 dot matrix LCD, can show 4 lines of characters2. Use serial interface communicate with the master processor, the number of interface signalline reduced greatly, only 8 signal lines including power and GND.3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy toinstall and replace.6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small7. Low power supply,the working current in normal situation is lower than 200.
    AU $4.69
    Free postage
    Save up to 10% when you buy more
Got one to sell?

Got one to sell?

Get it in front of 160+ million buyers.

Tell us what you think - opens in new window or tab