Mostly Complete Clutch Unit. All Take Up Springs In Good Order. We Are Breaking an Entire 2000 TT600 Engine. 25,000 Miles Only. Very Good Working Order. ONly Part Missing Is The Inner Basket With 4 Prongs That Holds The Springs.
This has a 1 1/2" hole for the master cylinder with 2 1/4" center to center between the bolt holes. The mounting holes are 2 7/8" side to side and 2 5/16" front to back. Blasted and primed with rust oleum.
This was in its original wrapper but had some light surface rust on the end. We took it to the Rebuilder and had it Micro Polished and Protective grease on all the Journals. This has been sitting in a warehouse for over 30 years.
0 bidsEnding 1 Oct at 10:47 AEDST4d 1hFrom United StatesCustoms services and international tracking provided