• White/Blue 84*48 Nokia 5110 LCD Display Screen Modul Module für Arduino DIY

    AU $1.84 to AU $2.82
    eBay Premium Service
    Free postage
    From China
  • 3 in 1 Leather Flip Carry Case & 2x Clear Screen Protector for Nokia Lumia 630

    1x Nokia Lumia 630 Flip leather case. 2x Nokia Lumia 630 screen protector. Made of high quality thin transparent clear TPU film that will adhere firmly to the phone screen glass. FLIP LEATHER CASE. SCREEN PROTECTOR.
    AU $6.19
    Free postage
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp X3O0

    Nokia 5110 LCD Module, Arduino CompatibleYou will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation )LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible.Has TWO Rows where header pins can be soldered for greater flexibility of use!Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode.Pin ConnectionsRST:reset.CE:chip selection.DC:data/commands choice.DIN:serial data line.CLK:serial Clock Speed.VCC:Power, 3.3V (Positive).LIGHT:backlight control terminal.GND:power negative.Power supply voltage: 2.7V- 3.3VBacklight Power Supply Voltage: 3.3V MAX43.6mm x 43.1m.
    AU $3.65
    From Hong Kong
    Free postage
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Arduino GA

    AU $3.88 to AU $4.97
    From Malaysia
    Free postage
    29 sold
  • LCD Screen Display Module White Backlight adapter PCB 3V-5V for Nokia 5110

    MCU development board with 5110 LCD module compatible with the Nokia 3310. PCB Size:4.3 4.50cm/1.69" 1.77". BL:backlight control. Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
    AU $1.19
    From China
    AU $1.99 postage
  • New 84*48 LCD Module Blue Backlight Adapter PCB for Nokia 5110 IB

    We are professional industrial&electronic Categorie manufacturers in China,We have working in thisfield for amost 10 years,Our product is includ all kit/welded product for Andruino,Raspberry Pi,or mini flights,if you have any need,pls contcact us for free,we will help you get all tings you need.
    AU $2.84
    eBay Premium Service
    Free postage
    From China
    63 sold
  • 84*48 Nokia 5110/5146/402/6150 LCD Screen Nokia 5110 LCD Bare Screen Arduino

    1PCS Nokia 5110 LCD Bare Screen 84 48 (NO PCB) for Arduino AVR PIC STM32. NOTE:This item is only Nokia 5100 LCD bare screen without PCB pinboard. Compatible with Nokia 3310 LCD driving source code. Product View.
    AU $1.85
    eBay Premium Service
    Free postage
    From China
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototype SH

    Nokia 5110 LCD Module, Arduino CompatibleYou will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation )LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible.Has TWO Rows where header pins can be soldered for greater flexibility of use!Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode.Pin ConnectionsRST:reset.CE:chip selection.DC:data/commands choice.DIN:serial data line.CLK:serial Clock Speed.VCC:Power, 3.3V (Positive).LIGHT:backlight control terminal.GND:power negative.Power supply voltage: 2.7V- 3.3VBacklight Power Supply Voltage: 3.3V MAX43.6mm x 43.1m.
    AU $3.75
    From Hong Kong
    Free postage
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp G8O1

    Nokia 5110 LCD Module, Arduino Compatible You will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation ) LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible. Has TWO Rows where header pins can be soldered for greater flexibility of use! Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode. Pin Connections RST:reset. CE:chip selection. DC:data/commands choice. DIN:serial data line. CLK:serial Clock Speed. VCC:Power, 3.3V (Positive). LIGHT:backlight control terminal. GND:power negative. Power supply voltage: 2.7V- 3.3V Backlight Power Supply Voltage: 3.3V MA.
    AU $3.82
    From Hong Kong
    Free postage
  • 84*48 Nokia 5110/5146/402/6150 LCD Screen Nokia 5110 LCD Bare Screen For Arduino

    1PCS Nokia 5110 LCD Bare Screen 84 48 (NO PCB) for Arduino AVR PIC STM32. NOTE:This item is only Nokia 5100 LCD bare screen without PCB pinboard. Compatible with Nokia 3310 LCD driving source code. Controller Philp PCD8544 LCD controller.
    AU $1.85
    eBay Premium Service
    Free postage
    From China
  • 84x48 Nokia LCD Module Blue Backlight Adapter PCB For Nokia 5110 LCD Arduino

    Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.
    AU $2.82
    eBay Premium Service
    Free postage
    From China
  • 8x Opening Pry Tool Parts Repair Equipment Kit For Nokia Phone GA

    A technician or expert is recommended for the installation of Nokia. Repair and replace your Nokia screen. Unscrew 2 screws at the bottom of the iPhone on either side of charging port. 1 x Suction Vacuum Opener.
    AU $1.42
    From Malaysia
    Free postage
    14 sold
  • 84*48 LCD Display Screen Module Red Backlight Adapter for Nokia 5110 STM32

    Nokia 5110 FOR STM32 (keil for arm). - Nokia 5110 FOR PIC (picc). - Nokia 5110 FOR 51 (keil c). - Nokia 5110 FOR AVR (gcc). - Nokia 5110 FOR MSP430. - Nokia 5110 FOR LPC2148. 5V 1602 Serial Blue LCD Display Modu.
    AU $4.61
    eBay Premium Service
    Free postage
    From China
  • 2PCS 84*48 Nokia 5110 LCD Screen Nokia 5110 lcd Bare Screen For Arduino

    We are professional industrial&electronic Categorie manufacturers in China,We have working in thisfield for amost 10 years,Our product is includ all kit/welded product for Andruino,Raspberry Pi,or mini flights,if you have any need,pls contcact us for free,we will help you get all tings you need.
    AU $5.20
    eBay Premium Service
    Free postage
    From China
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp R6X8

    Nokia 5110 LCD Module, Arduino Compatible You will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation ) LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible. Has TWO Rows where header pins can be soldered for greater flexibility of use! Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode. Pin Connections RST:reset. CE:chip selection. DC:data/commands choice. DIN:serial data line. CLK:serial Clock Speed. VCC:Power, 3.3V (Positive). LIGHT:backlight control terminal. GND:power negative. Power supply voltage: 2.7V- 3.3V Backlight Power Supply Voltage: 3.3V MA.
    AU $3.82
    From Hong Kong
    Free postage
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp U6G8

    Nokia 5110 LCD Module, Arduino Compatible You will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation ) LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible. Has TWO Rows where header pins can be soldered for greater flexibility of use! Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode. Pin Connections RST:reset. CE:chip selection. DC:data/commands choice. DIN:serial data line. CLK:serial Clock Speed. VCC:Power, 3.3V (Positive). LIGHT:backlight control terminal. GND:power negative. Power supply voltage: 2.7V- 3.3V Backlight Power Supply Voltage: 3.3V MA.
    AU $3.68
    From Hong Kong
    Free postage
  • 84*48 New 84x48 LCD Module White Backlight Adapter PCB For Nokia 5110 Arduino

    84 X 48 dot matrix LCD, can show 4 lines of characters. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small. The metal hooks on the module can fix the module on the printed board, which is very easy to install and replace.
    AU $1.99
    From China
    AU $1.19 postage
    146 sold
  • LCD Module White Backlight Adapter PCB For Nokia 5110 Arduino 84*48 84x48 New

    84 X 48 dot matrix LCD, can show 4 lines of characters. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small. The metal hooks on the module can fix the module on the printed board, which is very easy to install and replace.
    AU $1.98
    From China
    AU $1.19 postage
    590 sold
  • For Nokia 5110 LCD Module Backlight for Arduino White one Mega Prototype N7L7

    Nokia 5110 LCD Module, Arduino CompatibleYou will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation )LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible.Has TWO Rows where header pins can be soldered for greater flexibility of use!Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode.Pin ConnectionsRST:reset.CE:chip selection.DC:data/commands choice.DIN:serial data line.CLK:serial Clock Speed.VCC:Power, 3.3V (Positive).LIGHT:backlight control terminal.GND:power negative.Power supply voltage: 2.7V- 3.3VBacklight Power Supply Voltage: 3.3V MAX43.6mm x 43.1m.
    AU $3.99
    From Hong Kong
    Free postage
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp N1O9

    Nokia 5110 LCD Module, Arduino CompatibleYou will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation )LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible.Has TWO Rows where header pins can be soldered for greater flexibility of use!Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode.Pin ConnectionsRST:reset.CE:chip selection.DC:data/commands choice.DIN:serial data line.CLK:serial Clock Speed.VCC:Power, 3.3V (Positive).LIGHT:backlight control terminal.GND:power negative.Power supply voltage: 2.7V- 3.3VBacklight Power Supply Voltage: 3.3V MAX43.6mm x 43.1m.
    AU $3.68
    From Hong Kong
    Free postage
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp X9U4

    Nokia 5110 LCD Module, Arduino CompatibleYou will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation )LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible.Has TWO Rows where header pins can be soldered for greater flexibility of use!Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode.Pin ConnectionsRST:reset.CE:chip selection.DC:data/commands choice.DIN:serial data line.CLK:serial Clock Speed.VCC:Power, 3.3V (Positive).LIGHT:backlight control terminal.GND:power negative.Power supply voltage: 2.7V- 3.3VBacklight Power Supply Voltage: 3.3V MAX43.6mm x 43.1m.
    AU $3.68
    From Hong Kong
    Free postage
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp D5M1

    Nokia 5110 LCD Module, Arduino CompatibleYou will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation )LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible.Has TWO Rows where header pins can be soldered for greater flexibility of use!Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode.Pin ConnectionsRST:reset.CE:chip selection.DC:data/commands choice.DIN:serial data line.CLK:serial Clock Speed.VCC:Power, 3.3V (Positive).LIGHT:backlight control terminal.GND:power negative.Power supply voltage: 2.7V- 3.3VBacklight Power Supply Voltage: 3.3V MAX43.6mm x 43.1m.
    AU $3.68
    From Hong Kong
    Free postage
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp X3O0

    Nokia 5110 LCD Module, Arduino CompatibleYou will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation )LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible.Has TWO Rows where header pins can be soldered for greater flexibility of use!Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode.Pin ConnectionsRST:reset.CE:chip selection.DC:data/commands choice.DIN:serial data line.CLK:serial Clock Speed.VCC:Power, 3.3V (Positive).LIGHT:backlight control terminal.GND:power negative.Power supply voltage: 2.7V- 3.3VBacklight Power Supply Voltage: 3.3V MAX43.6mm x 43.1m.
    AU $3.75
    From Hong Kong
    Free postage
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp F8G4

    Nokia 5110 LCD Module, Arduino CompatibleYou will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation )LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible.Has TWO Rows where header pins can be soldered for greater flexibility of use!Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode.Pin ConnectionsRST:reset.CE:chip selection.DC:data/commands choice.DIN:serial data line.CLK:serial Clock Speed.VCC:Power, 3.3V (Positive).LIGHT:backlight control terminal.GND:power negative.Power supply voltage: 2.7V- 3.3VBacklight Power Supply Voltage: 3.3V MAX43.6mm x 43.1m.
    AU $3.68
    From Hong Kong
    Free postage
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp F8M3

    Nokia 5110 LCD Module, Arduino CompatibleYou will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation )LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible.Has TWO Rows where header pins can be soldered for greater flexibility of use!Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode.Pin ConnectionsRST:reset.CE:chip selection.DC:data/commands choice.DIN:serial data line.CLK:serial Clock Speed.VCC:Power, 3.3V (Positive).LIGHT:backlight control terminal.GND:power negative.Power supply voltage: 2.7V- 3.3VBacklight Power Supply Voltage: 3.3V MAX43.6mm x 43.1m.
    AU $3.65
    From Hong Kong
    Free postage
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp X4T3

    Nokia 5110 LCD Module, Arduino CompatibleYou will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation )LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible.Has TWO Rows where header pins can be soldered for greater flexibility of use!Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode.Pin ConnectionsRST:reset.CE:chip selection.DC:data/commands choice.DIN:serial data line.CLK:serial Clock Speed.VCC:Power, 3.3V (Positive).LIGHT:backlight control terminal.GND:power negative.Power supply voltage: 2.7V- 3.3VBacklight Power Supply Voltage: 3.3V MAX43.6mm x 43.1m.
    AU $3.75
    From Hong Kong
    Free postage
  • Nokia 5110 LCD Module Backlight for Arduino White 84 x 48 one Mega Prototyp K0W2

    Nokia 5110 LCD Module, Arduino CompatibleYou will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors( For Safe Operation )LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible.Has TWO Rows where header pins can be soldered for greater flexibility of use!Low power supply, the working current in normal situation is lower than 200μA,and has power-down mode.Pin ConnectionsRST:reset.CE:chip selection.DC:data/commands choice.DIN:serial data line.CLK:serial Clock Speed.VCC:Power, 3.3V (Positive).LIGHT:backlight control terminal.GND:power negative.Power supply voltage: 2.7V- 3.3VBacklight Power Supply Voltage: 3.3V MAX43.6mm x 43.1m.
    AU $3.75
    From Hong Kong
    Free postage
Got one to sell?

Got one to sell?

Get it in front of 160+ million buyers.

Tell us what you think - opens in new window or tab