Nice warm white light output and enough for a ornament lamp and cool working.
Verified purchase: Yes | Condition: New
These timers look good, and are versatile if all you need is a one-shot (or cycling) timer with adjustable mark/space ratio. Best feature is that the delays are settable from 1 to 999 in either seconds, minutes or hours. Both times must be in the same units however. There is only one output - a 20Amp rated dry contact. The lack of changeover contacts is ameliorated by having operating modes that cover both "close contacts on power-up, release after delay" and also "close contact after delay". There are also options to use it as a one-shot, or to have the cycles repeat. The modules are let down by poor English translation of the instructions. Nevertheless you can work your way through to make sense of them, which means the instructions are better than many. The casing is not meant to be taken apart, but if you intend to use them where isolation between mains and low voltage is critical, it would pay to prise one open and check the track separation on the PCB complies with your local isolation standards.Read full review
Verified purchase: Yes | Condition: New
Great Item, could do with better instructions, but as it is sourced from china it was to be expected, a search of the internet will fill in the blanks, can only support 2 remotes unless you hard code them (if you need to ask you don't need to know).
Verified purchase: Yes | Condition: New
I ordered by mistake, but when received I liked the product will work it in to my model railway
Verified purchase: Yes | Condition: New
I received it and plugged it to cigarette lighter outlet. It gives power just for 1 second and the light on the product starts blinking and cuts the power
Verified purchase: Yes | Condition: New