1. The BBQ burners work perfectly with the new jets, on NG. 2. The BBQ gas flames now tend to extinguish when the control valve is turned to the "low" position, so for convenience I've marked a new "low" indicator point for each of the burner control knobs to overcome this situation. 3. The WOK burner on my BBQ was fitted with a smaller jet originally (0.8mm diameter, not 1.1mm), however I established the burner is designed to operate with the same MJ output as the BBQ burners so I also changed this over to one of the 2.1 mm jets supplied. I also drilled out the old jet with a 1/16th inch drill bit to give me a 1.6 mm aperture NG which is almost a perfect MJ match for the original 0.8 mm LPG jet (using tables found on the internet). This also worked fine but I decided to keep all the jets the same. 4. Despite fitting a new Piezo unit, I found ignition to be more difficult on NG than was the case on LPG. My BBQ has one spark shared with two burners. I found by turning the gas on to a pair of burners, flame ignition was much faster, solvin gthe issue.Read full review
Verified purchase: Yes | Condition: New
Purchased these 2.1mm M6 jets to convert my new Aldi Coolabah 6 burner BBQ from LPG to Natural Gas. They fitted exactly and work fine.
Verified purchase: Yes | Condition: New
This product is great
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Barbecue Tools
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
