Pretty good, works fine. Simple design. Magnet mount need improvement, ...most important part of the installation getting them in line to the sensor and evenly distributed around the tail shaft, 2 magnets is fine.
Verified purchase: Yes | Condition: New
This kit runs off vacuum pressure a...nd is controlled by actuators. You can use any type of vacuum pressure, for testing purposes you can test off your brake booster vacuum hose. If you don't have enough vacuum pressure, say if you're running a smaller sized engine <2.0l, then it isn't enough pressure to actually pull the cable that is connected to your throttle body. Also, the pressure in the throttle body spring is greater than the tension that is created by the vacuum pressure in the manifold of this unit, thus you will not have enough pressure to even get past the spring tension and it will never work. Also, any slight bend (around 20%) in the cable running from this unit to your throttle body gives too much tension and again reduces the strength this unit has. I would stay clear of this product, it is old technology and is a scam that they charge $300 for this. I would recommend an electronic version for your car with the ability to not use this old "push-bike" style pulse magnets from the drive shaft. Thanks, and again, stay away from this product.
Verified purchase: Yes | Condition: New
This item is my 3rd cruise con...trol unit & all 3 are still working in 3 different cars, 1st one fitted in 1996, 75 ford wagon, 2nd in a 75 jaguar latest in a Honda CRV, did 2,500 ks over xmas 2018 & didn't fail me once...........always a good product.
Verified purchase: Yes | Condition: New
this product is good for what it's designed to ...do. I would have preferred a different control switch with a smaller footprint, but I guess it could just a case of getting used to.
Verified purchase: Yes | Condition: New
I followed the instructions and fitted it as per wha...t it said for a front wheel drive car and was sadly disappointed. Cruise control wouldn’t work above 80 kmh. Read the instructions again and cut the specified wire and went for another drive . This time it didn’t work below 100kmh. Read the instructions again and hidden in a paragraph it mentioned that some front wheel cars may need 3 magnets instead of 2 to work. Took it for a drive and cruise control didn’t work at all. This time I ignored the instructions, reconnected the cut wire, removed 2 magnets and left one installed. Took it for a drive and the cruise control worked perfectly, just like all of the other ones that I have installed. Sometimes it pays to ignore the instructions.
Verified purchase: Yes | Condition: New