Simply did not fit in our headlights - ...removed existing H1 & H7 halogen bulbs and tried to install these but H7 did not focus when fully installed - the oversize LED bulb head prevents the LED from being fully insterted as required to achieve focus. The H1 had a different connection to existing bulb and we decided at that point that this ugrade not worth the hassle!
Verified purchase: Yes | Condition: New
+Overall Very bright white light on low-beam but high-...beam is lacking. == You will probably want/need driving lights to assist high-beam. == + Performance Low-beam is excellent. High-beam only lifts the cut-off about 5 degrees, compared to my OEMs that lifted cut-off about 25 degrees. == The additional visibility provided by high-beam is close to negligible. == + Fitting Once you gain access to the headlight sockets, it is a simple plug-and-play. However, with no fitting instructions provided, you need to figure what to do with the red cooling fins. I cut a small slit into back of the rubber boot (that fits around and protects the back of the headlight socket) in order to fit the red cooling fins on the outside (i.e. behind the rubber boot) in order to provide cool air. After fitting, you will also need to check and adjust the headlight aiming to ensure the cut-off does not blind oncoming traffic.
Verified purchase: Yes | Condition: New
Works great.Expensive, but when it comes to a product th...at works when light is the key to seeing an potential accident ahead. Cost is not important
Verified purchase: Yes | Condition: New
Waited more than required time and install it with hassel as ...lights are covered at the back need to drill a hole in the bracket and when installed one of them is not even turning on so need to Purchase again from supercheap auto and now have got a hole in my headlight for no reason at all.
Verified purchase: Yes | Condition: New
It did not fit the purpose it was sold for.
Verified purchase: Yes | Condition: New