About
All feedback (124)
- cashcowcars-us (9145)- Feedback left by buyer.Past monthVerified purchaseVery Good! Thanks.
- au_bravo (640620)- Feedback left by buyer.Past monthVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- oz_goodshop (23637)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- flyhigher_asi (335)- Feedback left by buyer.Past yearVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- cutebob73 (12)- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Great communication Excellent buyer
- ozplaza.living (1739784)- Feedback left by buyer.More than a year agoVerified purchaseA+++ customer! Pls contact us if you are not satisfied.
Reviews (13)

07 October 2019
Mediocre
Brake pad compressor tool was good enough to barely change my front brake pads.(03 TJ MAGNA)
1st front passenger pad change no hassles.
2nd pad change on drivers side 1 compressor plate bent.
Which kept causing the tool to slip out of the calliper whilst trying to spread the pads for disc clearance once fitted with new pads.
So now I need to find an buy another spreader for doing my rear pads๐๐๐
But atleast I could get my new disc rotors and new pads on the front done so I actually still had brakes

14 May 2019
Home Mechanic
I've used a few other branded engine flushes over many years.
All have had their own benefits in use.
But nothing has matched LIQUI MOLY and the overall quality.
The added benefits of internal restoration is highly effective and noticeable.
Idle revs are highly stable again . Improved torque and acceleration under any conditions.
Completely cleans any gunk sludge varnish combustion deposits thoroughly.
For best results...
1. Warm engine to normal op temperature.
2. Pour detox into oil filler intake.
3. Run car stationary for 15min on idle (do not rev car)
4. Undo sump plug and drain ( oil will be hot caution not to burn yourself)
5. Remove old oil filter and pour some cheap oil into motor to flush out any old dirty oil that may still be lingering inside.
6. Once cheap oil has flushed the sump out.
Refit sump plug and install new oil filter remember to lubricate new seal on filter before fitting it.
7. Refill your motor with its specified oil ( making sure not to over fill. Let the oil settle for a few minutes and only top up if required.
8. Take car for a 20/30min drive to burn any residues off that remains inside the motor.
Presto your car will now put a smile on the dial for another 7.500klm till next oil change..

27 June 2020
100% quality
Great value top quality easy to apply great looking tint.