UV and Clear Lens Protection Filters Guide

Like if this Guide is helpful
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page

Why high quality lens protection is worth the extra money.

On a DSLR camera, the primary purpose of a Clear, UV or Skylight filter is to protect the front lens element. You will seldom see a difference in your image quality caused by using a high quality protective filter, but whether or not to use a protection filter is the big running debate. Neither side is wrong in this debate, but they have differing opinions – and the freedom of choice.

Let's take a look at the Should I use a protective filter? debate.

The sans-filter users say that their lens hoods (you always use one, right?) provide all the protection they need. They say that *any* glass in front of their lens will degrade their pictures. And their contingency plan is that a damaged lens can be repaired under their insurance coverage (check with your insurance agent for your specific coverage details before relying on this).

Of course, a required repair does not put the lens back into service immediately. An insurance claim puts a record with your name on it into the insurance company's shared claims database, potentially causing you to be considered a higher risk with higher premiums. And there is probably a deductible to be paid with this approach.

I personally advise the use of a protective filter as the merits to doing so are many. In most instances, a high quality filter will not degrade the final picture. A very bright light in the background of your picture *may* cause the filter to generate a small amount of flare, but I seldom detect any other filter-caused image defects. If I scratch the filter, I can simply remove it and keep shooting. And yes, this has happened to me while using a $1,000+ lens.

In addition, I feel much more comfortable cleaning dirt off of a filter than I do from a very expensive lens. I also feel a bit less protective of my filter-protected lenses (I might let a friend actually hold it!). A UV filter is not going to save the lens from a severe impact, so filter use does not negate the need for insurance coverage.

Even non-regular filter users will want a filter when shooting in very dusty or harsh conditions (think salt water spray). And a very solid reason for everyone to use UV filter protection is that most weather sealed lenses require filters to complete their weather sealing.

Peace of mind also has value. And if you are on the fence in this decision, peace of mind can easily push you over the use-a-protection-filter side of the fence.

Cheap, low quality filters are not acceptable.

I need to say it: I do not consider a cheap, low quality UV, clear or skylight protection filter to be acceptable for most circumstances. Many of these exist – do NOT buy them. They will degrade the quality of your pictures with ghosting, flare and loss of contrast being the primary issues. Image sharpness can also be affected.

Another risk is that the low quality filter will actually cause damage the lens. Some of Canon's lenses, including the EF 24-70mm f/2.8 II, 24mm f/2.8 IS, 28mm f/2.8 IS and 35mm f/2 IS, have a slightly curved front lens element. Some cheap filters do not provide enough clearance for these front lens elements and can cause scratches during installation. 

Perhaps if I knew that I was going to ruin the filter for a low-importance shot, I might opt for a cheap/low quality model. But otherwise, I spent a lot of money for quality gear and I'm spending a lot of time photographing something that is important to me, so I'm not going to sacrifice my image quality by putting bad glass in front of my lens. Why pay a premium price for a lens only to degrade its image quality with a $25 filter? Get a quality filter or do not use one.

When should you or should you not use protection filters?

At your choice, high quality clear, UV or skylight filters can remain on your lens at all times. You will not see a difference in image quality in most circumstances. But, there are some situations that I have stronger advice for.

If shooting in harsh elements (such as in salt water spray or in very dusty conditions), I highly recommend using a protection filter.

If shooting with very strong backlighting (such as the sun), I am less-likely to recommend using a protection filter because increased flare is a possibility. The increased potential for flare is indeed the biggest downside to using a clear or UV filter.

I hesitate to recommend the use of protective filters on very inexpensive lenses such as one of the 18-55mm kit lenses as the filter-to-lens cost ratio becomes harder to justify on such a lens.

What is the best UV or clear protection filter?

While there is more than one brand offering filter options at a high quality level, I have made Heliopan with SH-PMC 16-Layer Multi-Coating  my choice. The quality and performance of Heliopan filters place them among the world's finest. I have also found the high end Hoya filters to be good (but those I have had were a pain to clean – they tended to smear).

The Glass Matters

The most important part of any filter is of course the glass. Manufactured from  Schott Glass, Heliopan filter clarity is excellent. I have talked about clear, UV (also referred to as Haze) and skylight filters in this review. This variant is of course determined by the filter's glass. For digital cameras, it really does not matter which filter type you choose. My suggestion is to let price be your guide.

UV filters have long been the favorite. In the film days, they were used to prevent UV light from reaching UV-sensitive color film (though have basically no effect with our digital sensors). As I write this, UV filters are modestly less expensive than clear filters so I suggest going with the UV variant. Again, since they will not effect your image or block a noticeable amount of visible light, these filters can remain on the lens at all times.

Very important for the glass is multicoating. Heliopan's SH-PMC 16-Layer Multi-Coating  significantly improves light transmission and reduces flare/ghosting for improved contrast. "SH-PMC by Heliopan is not only an extraordinarily effective multiple layer coating, it is also harder than glass. So that it protects filters from scratches, and it is also water and dirt repellent, thus facilitating filter maintenance." 

Being easier to clean also reduces the risk of scratching. The SH-PMC coating causes water to bead off (the lotus effect) .

The Filter Ring

Also very important is the filter ring. Heliopan's high quality matte black (to prevent reflections) anodized brass rings reduce binding/cross threading to ensure optimal alignment. You know you have a quality product in hand when you pick up a Heliopan brass-ringed filter - you can feel the difference.

Stacking filters should be avoided

Usually, stacking filters over a protection filter is not a good idea. While you may not notice any image degradation with a single high quality filter attached, those odds decrease with additional glass placed in the optical path. Flare is again the primary concern.

Take your UV filter off before attaching a circular polarizing filter or neutral density filter to your lens. The alternate filter will provide the needed protection for your lens. The only time I can remember stacking a filter over a UV filter was when I was shooting in heavy salt water spray. I wanted to be able to remove a polarizer without the salt water reaching my front lens element.

In Summary

I suggest using a protection filter in most cases. Buy a quality UV, clear or skylight filter and leave it on your lens. Heliopan makes excellent filters and I am comfortable recommending them to you. Put one on your lens and enjoy the peace of mind it brings.
Have something to share, create your own Guide... Write a Guide
Explore more Guides