 |
The big foot plates met my expectations, even though they are made of plastic they should do the job. I had to enlarge the slot to 12mm to accommodate the pins of the drop-down stabiliser legs of my camper trailer. The modification was easy to do just use a drill & file.
Verified purchase: Yes | Condition: New
Because of the spring attached to the base it approaches the ground at a angle. At this point you must place your foot on the plate making it parallel with the ground and wind down the last portion which can be awkward on your own. The product is light weight and saves carrying 4 timber base plates but this may not outweigh it can be difficult on your own.
Verified purchase: Yes | Condition: New
Fitted these to a 2007 Avan Cruiseliner that had Alko wind down legs as standard. Reasonably straightforward fitment once mastering putting the spring eye onto the stainless pin. Chose to use Loctite on the securing nuts as don’t want to lose them. Previously we used squares of treated timber under each leg, so this modification will be easier and safer. No drilling required on our legs and did add an extra washer where the stainless pin with the eye pokes through the hole at the leg. So far these appear they should work well!
Verified purchase: Yes | Condition: New
Buyers need to know about threading springs on to clips, so minor instructions would save time for the fitter.
Verified purchase: Yes | Condition: New
Really good quality, size of base will increase the surface area nicely and looking forward to fitting them. I thought I had Alko legs, but they are Manutec so these will not fit. I'll have to trim the width of my existing feet to fit the 'Big Foot' set and currently don't have access to the tools needed.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Trailer Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Trailer Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
