Details about  MWC MultiWii Standard Flight Control Board +FTDI Multicopter QuadCopter

 New MWC MultiWii Flight Control Board【FULL Function Edition】  Multicopter QuadCoptor V1.9 Firmware 
 GPS Support

MWC is MultiWii Copter abbreviation, this open source program's original author is a French program Alex, after two years of joint efforts of many enthusiasts, and now the MWC program has become increasingly mature, has become very popular abroad, cost-effective flight control one. DIY is not a flight control, but no one can do things, Chris launched the MWC model series of flight control, so that multi-axis aircraft MWC fans can easily access the high cost of this product, through the MWC program to control the hardware platform, can achieve a variety of multi-spindle, high-quality flight results, flexibility can be adjusted into a very stable or very flexible to fit aerial, FPV or stunt flying and many different needs. With the same program for the open source compared to KK or ACM, MWC's more stable flight performance, flight skills required for novice lower debugging process more intuitive. Dedicated MWC GUI program can easily observe the PID parameters, flight control signal input / output status, sensor / switch-state, as well as aircraft attitude and heading sensor signal state of each group, sufficient for the initial configuration of the aircraft easier.

MultiWii SE Standard Edition supports the following aircraft models:

GIMBAL -------- PTZ stabilizer independent (non-flight control purposes)

BICOPTER ------ 2-axis aircraft Avatar

Tricopter ----- Y3 (Y-type 3-axis)

QUADP --------- 4-axis + classic mode  (Default setting)

QUADX --------- 4-axis × mode

 Y4 ------------ Y-type four-axis

Y6 ------------ Y-type 6-axis

HEX6 ---------- 6 axis + mode

HEX6X --------- 6-axis × mode

FLYING WING --- flying wing with a (non-multi-axis machine, the program is in testing phase).

 

Tool to connect the computer via FTDI, flight mode can be easily converted at any time.

MultiWii SE Standard Edition Hardware configuration:

ATMEGA328P microcontroller

ITG3205 three-axis digital gyroscope

BMA180 triaxial accelerometer

BMP085 pressure sensor

HMC5883L axis magnetoresistive sensor (electronic compass)

 

MWC above the mainstream hardware platform with a combination of commonly used, which is equivalent to Arduino Pro Mini and FFIMU 0.35 9DOF IMU sensor combined, integrated design makes working more stable flight control.