tool_nerd shop
SainSmart Mega2560 + 3.2" TFT Touch LCD SD Card + TFT Shield Kit For Arduino R3
This is SainSmart
3.2” LCD kit contains one SainSmart Mega 2560, one SainSmart 3.2” LCD shield
and one TFT LCD adjustable shield, which is easy for Arduino fans and starters
to plug and play. This kit helps you to avoid complicated wiring processes and
save you much time to accomplish your goal. You can feel free to enjoy the touch
function and SD card function by using our codes.
Features
SainSmart
Mega2560 Board
SainSmart Mega 2560 is a microcontroller
board based on the ATmega2560. It
contains everything needed to support the microcontroller; simply connect it to
a computer with a USB cable or power it with an AC-to-DC adapter or battery to
get started. The Mega is compatible with most shields designed for the
Duemilanove or Diecimila.
SainSmart Mega2560 has 54 digital
input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4
UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a
power jack, an ICSP header, and a reset button.
SainSmart Mega 2560 can be powered via the USB port (5V) or with an external power supply (9V). The power
source is selected automatically.
| Microcontroller |
ATmega2560 |
| Operating Voltage |
5V |
| Input Voltage (recommended) |
7-12V |
| Input Voltage (limits) |
6-20V |
| Digital I/O Pins |
54 (of which 14
provide PWM output) |
| Analog Input Pins |
16 |
| DC Current per I/O Pin |
40 mA |
| DC Current for 3.3V Pin |
50 mA |
| Flash Memory |
256 KB of which
8 KB used by boot loader |
| SRAM |
8 KB |
| EEPROM |
4 KB |
| Clock Speed |
16 MHz |
SainSmart 3.2 TFT LCD Display
1. SainSmart
3.2" TFT LCD Display is a LCD touch screen module. It is a powerful and
multifunctional module for your project. The Screen include a controller
SSD1289, it's a support 8/16bit data interface, easy to drive by many MCU like
STM32, AVR and 8051. It is designed with a touch controller in it. The touch IC
is ADS7843, and touch interface is included in the 40 pins breakout. It is the
version of product only with touch screen and touch controller.
2. Size:
3.2 inch
3. 240
x 320 QVGA resolutions.
4. 65K
true to life colors.
5. TFT screen
with SD card reader.
6. The LCD
has a wide viewing angle; the contrast is also very suitable.
7. This
TFT LCD Screen Module, 40pins interface, not just a LCD screen but include the
Touch, SD card and Flash design. So it’s a powerful extension module for your
project.
8. Attention
please: SD card supports
Mega 2560, ARM and 51 MCU.
SD Memory Supports：& lt;span lang="EN-US" style="font-size:12pt;color:#333333;"><=2GB.
Please use the Arduino Software version: 0023/0022
SainSmart TFT LCD Adjustable Shield
1. SainSmart
TFT LCD adjustable shield is 100% compatible for the Mega2560 to expend more
Pins and make the connection between the Mega 2560 and 3.2” LCD display easier.
2. SainSmart
3.2 TFT LCD module works in 3.3V voltage level and you need to use cables to
connect with SainSmart Mega. And this shield can help you out of the bothers to
use other cables. You just need to plug the module to Mega through this shield.
3. This
shield supports both 16 bit modes. And Mega board has enough pins for using SD
card and touch function at the same time. It also has an adjustable button for
contrast of the LCD display.
Package List
1x SainSmart Mega2560
1x SainSmart 3.2” TFT LCD Display
1 x SainSmart TFT LCD Adjustable Shield
NOTE: Please send us eBay message for manual if you need one after your
purchase.
