Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Other Air & Fuel Delivery
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Other Air & Fuel Delivery
Don't buy unless your good with tools and fixing problems. Good quality but fitment is crap. You will need to trim up the snorkel where the rubber joining sections go and get yourself new joiners as the ones they send are to short and to small. Would not recommend just buy yourself a decent one to begin with
Verified purchase: Yes | Condition: New
Very good looking unit , however there was insufficient room inside the guard to allow it all to fit. Need to have 12mm cut off the snorkel and the connecting pipe and trim the rubber to allow it to fit. Final product is good but didn't think I would have to make this adjustment, I expected it to fit as is
Verified purchase: Yes | Condition: New
Overall straight forward assembly if you pay attention to these 2 details. The instruction sheet doesn't mention the need to trim the snorkel and internal ducts. This is a very tight fit at the top of the mudguard. I had to trim ~10 mm off the snorkel pipe, and ~20 mm off the matching internal duct pipe. Cutting more off the internal duct leaves more room to tighten the hose clamp from underneath. Ensure there is enough pipe on the internal duct for the hose clamp to connect! I suggest positioning the internal duct and then see if the snorkel snugs up to the guard. Then remove/trim and fit the hoses. I had no need to trim the internal duct to air filter lower body. Also when driving long distances in very dusty conditions, turning the snorkel head backwards reduces dust entry further. Happy 4WD'ing!Read full review
Verified purchase: Yes | Condition: New
Had to cut joining pipe and snorkel 15 mm off both so could fit inside the guard.i don't know how many times I had to take it back off bad instructions bad fitment don't recommend at all 🤬
Verified purchase: Yes | Condition: New