Russell 639570 Speed Bleeder 7 mm x 1.0 mm Thread 34 mm Overall Length 2 pcs
12 September 2018
True One person brake bleeding.
This is the first set of Russell branded speed bleeder valves I’ve installed. They are good quality and work as designed. The valves fit perfectly on my E36 M3 front and rear calipers. Bleeding was a breeze if you follow BMW procedures to ensure the ABS systems bleeds properly. You only need to open the valve about 1/4 turn to allow fluid to flow without seeping though the threads. Once bleeding is done, apply a tiny bit of grease or anti size to the inside of the rubber valve cap to prevent the valve from seizing. It’s worked for me before with the original speed bleeders. You won’t be disappointed.
1 of 1 found this helpful
Apache 98399065 1/4" x 24", Universal Hydraulic Hose
29 September 2018
It’s what it says it is.
Good quality hose with excellent fittings.
3U2Z14S411ZEB - WIRE ASY - Ford
08 April 2020
Better than original plug.
Bought this to replace the original blower fan connector on my 2011 Expedition King Ranch with automatic climate controls. The blower would cut out periodically and had to wiggle the cable to make it work again. It took me a while to find the correct part number. This one supersedes a previous part # 3U2Z14S411ZEA. The new connector has a green rubber seal inside the housing that the old one doesn’t have. It fits snuggly and has zero wiggle. I used most of the cable length to remove any stress on the connector. Real simple fix.