• Thomas The Tank Engine Wooden Railway Sodor Airfield Rare Retired with Tigermoth

    The Tigermoth attaches to the arm of the airfield and you turn the red knob to wind it up then on the side of the airfield press the red button and watch the Tigermoth spin around. Easily to attach/detach the Tigermoth as it is held in position by a magnet.
    AU $150.00
    AU $18.00 postage
  • Noy's Miniatures 1/48 Airfield Tarmac Sheet: WWII US Pacific Heavy Bomber

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $65.50
    AU $19.50 postage
  • Noy's Miniatures 1/32 Airfield Tarmac Sheet:Modern Fighter Hangar Set (3 sheets)

    This innovative set of 3 prints depicts the inside of a typical maintenance hangar for fighter aircraft that could be seen in the USA/Canada/Western Europe during the 2000s. Three 1/32 sheets as follows: - Floor: Length: 59.3 cm / 23.35 inch; Width: 40.0 cm / 15.75 inch; - Rectangle Wall: Length: 59.3 cm / 23.35 inch; Width: 40.0 cm / 15.75 inch; - Square Wall: Length: 40.0 cm / 15.75 inch; Width: 40.0 cm / 15.75 inch. - Plotter-printed on heavy paper (Not cardstock), this 1/32 set will be shipped rolled in a sturdy carton tube, just like a poster. * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $159.50
    AU $11.95 postage
  • 1/48 Airfield Tarmac Sheet: IDF/AF Airbase Set #2 Earth Wall (2pcs, 39.5x28cm)

    Approx. dimensions of base and backdrop: Length: 39.5 cm / 15.5 inch; Width: 28 cm / 11.02 inch. This unique and innovative set depicts an Israeli Air Force combat jet airbase and is aimed at the IDF/AF enthusiast and modeller. The set includes 2 prints. The first print depicts the concrete/asphalt surface upon which the IAF jet rolls; the second print is a backdrop print depicting a sand and grass revetment with a different airfield view and the Israeli desert mountains in the background, while a diamond formation of 4 F-16s crosses the sky above. The included image shows the various possibilities that can be achieved. Set will appeal to the Israeli Air Force aircraft models enthusiasts.
    AU $25.50
    AU $9.50 postage
  • Noy's Miniatures 1/144 Airfield Tarmac Sheet: IDF/AF Airbase Set #2 Earth Wall

    Approx. dimensions of base and backdrop: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch. There are 2 sheets in this set. The first sheet depicts the concrete\asphalt surface upon which the IAF jets roll; the second is a backdrop sheet depicting an earth & grass revetment with an airfield view and the Israeli desert mountains in the background, while a diamond formation of 4 F-16s crosses the sky above. Approx. dimensions of base and backdrop: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch.
    AU $10.80
    Was: Previous priceAU $13.50
    AU $4.50 postage
  • Noy's Miniatures 1/48 Airfield Tarmac Sheet: WWII Allied Medium Bomber

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $62.50
    AU $11.95 postage
    5 watching
  • 1/72 Airfield Tarmac Sheet: Battle of Britain Airfield Set #2 Grass Wall

    Approx. dimensions of base and backdrop: Length: 31 cm / 12.2 inch; Width: 22 cm / 8.66 inch. This new state-of-the-art sheet set is aimed at the Battle of Britain aviation enthusiast. This version includes 3 sheets: The first sheet depicts the concrete surface upon which the fighter parks; the second is a backdrop sheet depicting a grass revetment with the airfield view and a Spitfire Mk.I and a Hurricane Mk.I approaching in the summer sky above. The third print is an additional BONUS free of charge component that enables the modeller to create the brick wall in 3D.
    AU $19.00
    AU $4.50 postage
    Only 1 left!
  • Noy's Miniatures 1/72 Airfield Tarmac Sheet:Soviet Fighter Hangar Set (3 sheets)

    This innovative set of 3 prints depicts the inside of a typical maintenance hangar for fighter aircraft that could be seen in the former Soviet Union states (1970s), up to the present. Three 1/72 sheets as follows: - Floor: Length: 31.0 cm / 12.2 inch; Width: 21.9 cm / 8.6 inch; - Rectangle Wall: Length: 31.0 cm / 12.2 inch; Width: 21.9 cm / 8.6 inch; - Square Wall: Length: 21.9 cm / 8.6 inch; Width: 21.9 cm / 8.6 inch. * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $29.50
    AU $4.50 postage
  • 1/144 Airfield Tarmac Sheet: South East Asia US Helicopter Set (2pcs)

    Approx. dimensions of base and backdrop: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch. The first sheet depicts the Marston mats (PSP) surface upon which the US military helicopter parked; the second is a backdrop sheet depicting a view of a typical US AFB in Vietnam with landscape elements, airplane and other base infrastructure parts, barrels and sandbags wall, sky, clouds and USAF helicopter in sky.
    AU $10.80
    Was: Previous priceAU $13.50
    AU $4.50 postage
  • 1/144 Airfield Tarmac Sheet: IDF/AF Airbase Set #1 Concrete Wall (3 sheets)

    Approx. dimensions of base and backdrop: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch. There are 3 sheets in this set. The first sheet depicts the concrete\asphalt surface upon which the IAF jets roll; the second is a backdrop sheet depicting a concrete revetment with the airfield view and an IAF F-16 taking off, afterburner a-blaze, while the Israeli desert mountains tower in the background; the third sheet is an additional BONUS free of charge 3D component that enables the modeller to create the concrete revetment wall in 3D.
    AU $10.80
    Was: Previous priceAU $13.50
    AU $4.50 postage
  • 1/72 Airfield Tarmac Sheet: Battle of Britain Airfield Set #1 Brick Wall

    Approx. dimensions of base and backdrop: Length: 31 cm / 12.2 inch; Width: 22 cm / 8.66 inch. This new state-of-the-art sheet set is aimed at the Battle of Britain aviation enthusiast. This version includes 3 sheets: The first sheet depicts the concrete surface upon which the fighter parks; the second is a backdrop sheet depicting a brick revetment with the airfield view and a Spitfire Mk.I and a Hurricane Mk.I approaching in the summer sky above. The third print is an additional BONUS free of charge component that enables the modeller to create the brick wall in 3D.
    AU $16.15
    Was: Previous priceAU $19.00
    AU $4.50 postage
  • Noy's Miniatures 1/48 Airfield Tarmac Sheet: WWII Luftwaffe Hardstand Winter

    A single 1/48 print. Approximate dimensions: Length: 890 mm; Width: 600 mm. Designed to take models of almost any WWII Luftwaffe machine, this huge, state-of-the-art print authentically represents a typical combination of the wooden planks hardstand, the concrete surface and the snowy terrain seen all over Europe during the conflict. The very large size provides more than enough space for taking photos of your model without showing the print's edges and, at the same time, enables you to create a rich, "busy looking" diorama. As with other Noy's Miniatures offerings, all 3D effects are printed. Item is plotter-printed on heavy paper (not cardstock) and will be shipped rolled in a sturdy carton tube, just like a poster.
    AU $65.50
    AU $19.50 postage
  • 1/144 Airfield Tarmac Sheet: Battle of Britain Airfield Set #1 Brick Wall

    Approx. dimensions of base and backdrop: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch. This new state-of-the-art sheet set is aimed at the Battle of Britain aviation enthusiast. This version includes 3 sheets: The first sheet depicts the concrete surface upon which the fighter parks; the second is a backdrop sheet depicting a brick revetment with the airfield view and a Spitfire Mk.I and a Hurricane Mk.I approaching in the summer sky above. The third print is an additional BONUS free of charge component that enables the modeller to create the brick wall in 3D.
    AU $10.80
    Was: Previous priceAU $13.50
    AU $4.50 postage
  • 1/144 Airfield Tarmac Sheet: Battle of Britain Airfield Set #2 Grass Wall

    Approx. dimensions of base and backdrop: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch. This new state-of-the-art sheet set is aimed at the Battle of Britain aviation enthusiast. This version includes 3 sheets: The first sheet depicts the concrete surface upon which the fighter parks; the second is a backdrop sheet depicting a grass revetment with the airfield view and a Spitfire Mk.I and a Hurricane Mk.I approaching in the summer sky above. The third print is an additional BONUS free of charge component that enables the modeller to create the brick wall in 3D.
    AU $10.80
    Was: Previous priceAU $13.50
    AU $4.50 postage
  • Noy's Miniatures 1/32 Airfield Tarmac Sheet: South East Asia Helicopter Base

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $54.00
    AU $11.95 postage
  • Noy's Miniatures 1/72 Airfield Tarmac Sheet: WWII Luftwaffe Hardstand Winter

    A single 1/72 print. Approximate dimensions: Length: 593 mm; Width: 400 mm. Designed to take models of almost any WWII Luftwaffe machine, this large, state-of-the-art print authentically represents a typical combination of the wooden planks hardstand, the concrete surface and the snowy terrain seen all over Europe during the conflict. The very large size provides more than enough space for taking photos of your model without showing the print's edges and, at the same time, enables you to create a rich, "busy looking" diorama. As with other Noy's Miniatures offerings, all 3D effects are printed. Item is plotter-printed on heavy paper (not cardstock) and will be shipped rolled in a sturdy carton tube, just like a poster.
    AU $54.00
    AU $11.95 postage
  • Noy's Miniatures 1/32 Airfield Tarmac Sheet: Battle of Britain Airfield (Grass)

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $106.50
    AU $11.95 postage
  • AIRFIX Gift Set A50015 RAF Battle of Britain Airfield Set - 1:76 Scale

    A50015 RAF Battle of Britain Airfield Gift Set 1:76. The summer of 1940 was vital, not just for the survival of the RAF and Great Britain, but also the free world. While the Hurricanes and Spitfires of the RAF played an invaluable role, the hard work of the ground crews and their support cannot be under estimated.
    AU $69.95
    Free postage
    11 watching
  • Noy's Miniatures 1/32 Airfield Tarmac Sheet:South East Asia (SEA) Helicopter Set

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $106.50
    AU $11.95 postage
  • Noy's Miniatures 1/32 Airfield Tarmac Sheet: IDF/AF Airbase Set (Concrete Wall)

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $106.50
    AU $11.95 postage
  • Noy's Miniatures 1/32 Airfield Tarmac Sheet: IDF/AF Airbase Set (Earth Wall)

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $106.50
    AU $11.95 postage
  • Noy's Miniatures 1/144 Airfield Tarmac Sheet: Soviet Fighter Hangar (3 sheets)

    This innovative set of 3 prints depicts the inside of a typical maintenance hangar for fighter aircraft that could be seen in the former Soviet Union states (1970s), up to the present. Three 1/144 sheets as follows: - Floor: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch; - Rectangle Wall: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch; - Square Wall: Length: 10.5 cm / 4.1 inch; Width: 10.5 cm / 4.1 inch. * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $22.00
    AU $4.50 postage
  • Noy's Miniatures 1/32 Airfield Tarmac Sheet: "Soviet PAG-14" (Size: 593 x 400mm)

    1/32 Airfield Tarmac Sheet: "Soviet PAG-14" (Size: 593 x 400mm) (SKU: NM3208). All orders are wrapped very carefully before dispatch. Manufacturer: Noy's Miniatures. (Note: paint and glue are. International Money Orders or Checks are Not accepted. ).
    AU $57.50
    AU $9.70 postage
  • 1/144 Airfield Tarmac Sheet: WWII US Pacific Heavy Bomber Dispersal (320x230mm)

    This state-of-the-art offering authentically represents the typical dispersal area of US Pacific B-29s of WWII, as well as other bomber types serving in the US Pacific theater during that era. The print displays the asphalt-concrete pavement upon which the giant bomber was parked, as well as the unique crushed coral sand and the arid grass surrounding the parking area. Print's size provides enough space for taking photos of your model without showing the edges and, at the same time, enables you to create a rich, "busy looking" diorama. As with other Noy's Miniatures offerings, all 3D effects are printed. Approx. dimensions of base and backdrop: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch.
    AU $9.50
    AU $4.50 postage
    3 watching
  • Noy's Miniatures 1/48 Airfield Tarmac Sheet: South East Asia (SEA) US Helicopter

    Approx. dimensions of base and backdrop: Length: 39.5 cm / 15.5 inch; Width: 28 cm / 11.02 inch. The first sheet depicts the Marston mats (PSP) surface upon which the US military helicopter parked; the second is a backdrop sheet depicting a view of a typical US AFB in Vietnam with landscape elements, airplane and other base infrastructure parts, barrels and sandbags wall, sky, clouds and USAF helicopter in sky.
    AU $21.68
    Was: Previous priceAU $25.50
    AU $9.50 postage
  • Noy's Miniatures 1/144 Airfield Tarmac Sheet: WWII Luftwaffe Hardstand Winter

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $11.00
    AU $4.50 postage
  • 1/72 Airfield Tarmac Sheet: WWII Allied Heavy Bomber - Compact (39.5x28cm)

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $13.00
    AU $9.50 postage
    4 watching
  • Noy's Miniatures 1/48 Airfield Tarmac Sheet:WWII Allied Heavy Bomber (890x600mm)

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $65.50
    AU $19.50 postage
  • Noy's Miniatures 1/48 Airfield Tarmac Sheet:UK Heavy Bomber Cold War (890x600mm)

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $65.50
    AU $19.50 postage
  • Noy's Miniatures 1/48 Airfield Tarmac Sheet: Large South East Asia Dispersal

    This plotter-printed item depicts a significantly larger concrete parking area for 1/48 US Vietnam war aircraft. It comes inside a sturdy carton tube and is shipped like a poster. Approximate dimensions: Length: 59.4 cm (23.4 inch); Width: 42 cm (16.53 inch). * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $54.00
    AU $11.95 postage
  • Noy's Miniatures 1/72 Airfield Tarmac Sheet: WWII US Pacific Heavy Bomber

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $54.00
    AU $11.95 postage
    3 watching
  • Noy's Miniatures 1/72 Airfield Tarmac Sheet:UK Heavy Bomber Cold War (593x400mm)

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $14.00
    AU $11.95 postage
  • Noy's Miniatures 1/144 Airfield Tarmac Sheet: WWII Allied Heavy Bomber 310x219mm

    This state-of-the-art print authentically represents the typical "Frying Pan" dispersal of an RAF heavy bomber airfield during WWII and is aimed at modelers of the wartime 'British Heavies': Lancaster, Halifax and Stirling (among others). The print provides more than enough space for taking photos of an 1/144 RAF heavy bomber model without showing the print's edges and, at the same time, enables one to create a rich, "busy looking" diorama. As with other Noy's Miniatures offerings, all 3D effects are printed. Item is quality printed on cardstock. .
    AU $9.50
    AU $4.50 postage
  • 1/144 Airfield Tarmac Sheet: Optional Backdrop for NM144014 14.8x10.5cm

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $6.75
    Was: Previous priceAU $7.50
    AU $3.50 postage
  • Noy's Miniatures 1/32 Airfield Tarmac Sheet: SEA Base (Length:593mm,Width:400mm)

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $54.00
    AU $11.95 postage
    3 watching
  • Noy's Miniatures 1/32 Airfield Tarmac Sheet: WWI Base (Length:593mm,Width:400mm)

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $54.00
    AU $11.95 postage
  • Noy's Miniatures 1/32 Airfield Tarmac Sheet: "Taxiing" (Size: 593 x 400mm)

    All orders are wrapped very carefully before dispatch. Manufacturer: Noy's Miniatures. (Note: paint and glue are. International Money Orders or Checks are Not accepted. Then you will see the button! ).
    AU $57.50
    AU $9.70 postage
    2 watching
  • Noy's Miniatures 1/32 Airfield Tarmac Sheet: "Vietnam" (Size: 593 x 400mm)

    1/32 Airfield Tarmac Sheet: "Vietnam" (Size: 593 x 400mm) (SKU: NM3205). All orders are wrapped very carefully before dispatch. Manufacturer: Noy's Miniatures. (Note: paint and glue are. International Money Orders or Checks are Not accepted. ).
    AU $57.50
    AU $9.70 postage
  • Noy's Miniatures 1/144 Airfield Tarmac Sheet: "Helipad" (Size: 148 x 105mm)

    A single 1/144 sheet (approx. dimensions: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch).
    AU $6.75
    Was: Previous priceAU $7.50
    AU $3.50 postage
  • Noy's Miniatures 1/48 Airfield Tarmac Sheet: Optional Backdrop for NM4814

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $14.00
    AU $19.50 postage
  • Noy's Miniatures 1/48 Airfield Tarmac Sheet:Soviet Fighter Hangar Set (3 sheets)

    This innovative set of 3 prints depicts the inside of a typical maintenance hangar for fighter aircraft that could be seen in the former Soviet Union states (1970s), up to the present. Three 1/48 sheets as follows: - Floor: Length: 39.5 cm / 15.6 inch; Width: 28.0 cm / 11.02 inch; - Rectangle Wall: Length: 39.5 cm / 15.6 inch; Width: 28.0 cm / 11.02 inch; - Square Wall: Length: 28.0 cm / 11.02 inch; Width: 28.0 cm / 11.02 inch. * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $39.50
    AU $9.50 postage
    Only 1 left!
  • Noy's Miniatures 1/144 Airfield Tarmac Sheet: Modern Fighter Hangar (3 sheets)

    This innovative set of 3 prints depicts the inside of a typical maintenance hangar for fighter aircraft that could be seen in the USA/Canada/Western Europe during the 2000s. Three 1/144 sheets as follows: - Floor: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch; - Rectangle Wall: Length: 14.8 cm / 5.8 inch; Width: 10.5 cm / 4.1 inch; - Square Wall: Length: 10.5 cm / 4.1 inch; Width: 10.5 cm / 4.1 inch. * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $22.00
    AU $4.50 postage
  • Noy's Miniatures 1/72 Airfield Tarmac Sheet: Large South East Asia Dispersal

    The print depicts a large concrete parking area for 1/72 US Vietnam war aircraft. Approximate dimensions: Length: 39.5 cm (15.5 inch); Width: 28 cm (11 inch). Item is quality printed on cardstock. * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $14.00
    AU $9.50 postage
    2 watching
  • Noy's Miniatures 1/144 Airfield Tarmac Sheet: WWI Airfield Set w/Bonus Backdrop

    Three 1/144 sheets, approximate dimensions of each sheet: Length: 14.8 cm (5.8 inch); Width: 10.5 cm (4.1 inch). * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $15.00
    AU $4.50 postage
  • Noy's Miniatures 1/144 Airfield Tarmac Sheet: Modular Generic Concrete Slabs

    A single 1/144 print. Approximate dimensions: Length: Length: 310 mm (12.2 inch); Width: 220 mm (8.66 inch). This innovative print depicts a generic, modular array of concrete square slabs for aircraft models of limitless types and periods. There are no marks or markings that cross any two adjacent slabs, and each slab can therefore be cut, rotated in 90 or 180 or 270 degrees and positioned by any other slab. This means that, in addition to the huge dimensions of the print as-is, it can be enlarged to any required size. The options are practically limitless. Item is quality printed on cardstock. * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $11.00
    AU $4.50 postage
  • Noy's Miniatures 1/72 Airfield Tarmac Sheet: Optional Backdrop for NM7214

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $11.00
    AU $4.50 postage
  • Noy's Miniatures 1/144 Airfield Tarmac Sheet: Optional Backdrop for NM144014

    * This is a tarmac/airfield diorama print set which does NOT include an aircraft model kit or other accessories.
    AU $8.50
    AU $4.50 postage
  • 1/72 Airfield Tarmac Sheet: South East Asia (SEA) US Helicopter Set for 3D 2pcs

    Approx. dimensions of base and backdrop: Length: 31 cm / 12.2 inch; Width: 22 cm / 8.66 inch. This set is ready to receive 3D items (not included) to create an impressive 3D diorama. The first sheet depicts a ground surface to which a photoetched or resin PSP part may be added; the second is a modified backdrop sheet ready to receive metal/plastic/resin drums and sandbags.
    AU $16.15
    Was: Previous priceAU $19.00
    AU $4.50 postage
Got one to sell?

Got one to sell?

Get it in front of 160+ million buyers.

Tell us what you think - opens in new window or tab