Airtronics RC Model Vehicles, Toys & Control Line

This means no more antennas sticking out of the body, as well as no more worry about damaging the antenna during use. Just mount the RX-482 Super Response SSL receiver in the upright position in your model and enjoy the same solid reception as you've come to expect from other Airtronics and Sanwa receivers.

The MT-4S Super builds on the original MT-4 by adding Sanwa Synchronized Link support, decreased response time (same as the M12), a new backlit LCD, RX-472 Super Response receiver and updated steering wheel and graphics.

The SD-10G was developed by Sanwa's best and brightest computer programmers in concert with the most-experienced pilots from Sanwa Japan and Airtronics USA. We've worked with pilots for more than an year to ensure every detail and every nuance was developed for the modeler, both sport and competitor.

6 CHANNEL SYSTEM TX. 7 CHANNEL RX RX-71E.

Laptop screen replacement requires technical knowledge and proper training. Inexperienced individual attempting DIY do so at their own risk.

●Digital servo. ●Torque type.

40.5MM X 21MM X 38MM - 61g.

●Digital servo. ●Single bearing.

What you see is what you get. New in box Sanwa Airtronics MX-V 2.4ghz 3 channel radio with waterproof receiver. This radio is one of the best ever made with multiple model memory, digital adjustment, and solid build.

Airtronics Sanwa SNW107A41258A 4-channel RX481 Receiver w/ built-in Antenna. The RX-481 Super Response receiver is compatible with Airtronics and Sanwa 2.4GHz FH3 and FH4T transmitters, such as the M12S, M12, MT-4S, MT-4, MX-3X, M11X, EXZES-Z and Gemini X.

(This is the Airtronics 94761Z Mini Digital High Torque. Sailplane Wing Servo. One 94716Z competition digital servo/Z-connector. mounting screws, and one X-shaped servo arm). Installing on sailplane wing and connecting to receiver.

The Sanwa RX-380 3-Channel Receiver is the most affordable FH3 receiver from Sanwa! The receiver is NOT equipped with BEC circuitry. DO NOT use a receiver battery greater than 7.4 volts to power the receiver.

Cmy EZRUN WP SC8. 1.5 Motor Supported: Sensorless Brushless Motor;. EZRUN WP SC8 Waterproof 120A Brushless ESC. 1.6 Suitable Brushless Motor 1.1 Output: EZRUN-SC8: Continuous 120A, burst 760A;. 7 Internal timing can be changed easily to make the ESC suitable for various of motors.

Here is a new in box VECTOR Transmitter and receiver servo kit, model VT2P. This is for RC boats and cars.NOT planes. This was never used. FOLKS, I AM HUMAN. I WILL MAKE MISTAKES. I WILL MISS THINGS.

Brushless Motor. PGS Setting Gear-Compatible. SSL-Compatible Programmable Servo; Compatible with CODE 10 (M12S, EXZES ZZ, MT-44) Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S). Setting Adjustment to connect Servo with Setting Gear.

Up for sale is a new in box Airtronics 94359Z Sanwa ERG-VX high torque aluminum gear double ball bearing servo with aluminum heat sink case. These are new and never use. They where meant for a car that I never finished.

Airtronics Aquila 6 6-Channel 2.4GHz Radio System, with an included RX71E FH1 Receiver. The Aquila 6 is an advanced 2.4GHz Digital Proportional 6 Channel with a unique style and proven 2.4GHz system.

This is an optional Sanwa Plastic Drop Down Assembly for the M12 and M12S Transmitters. This set includes the necessary drop down brackets, as well as mounting hardware.

Item Details UPC Code:4944683027250. Warranty:Full Manufacturer Warranty.

About SSL System. Rated Current: 670A. Neutral Dead Band. Boost Acceleration. Boost Start.

Airtronics / Sanwa SNW107A41145A 3-Channel RX-371W Waterproof Receiver. Item Details UPC Code:Does Not Apply. Warranty:Full Manufacturer Warranty.

This is an optional Sanwa Wide Steering Wheel Foam Grip. This wide grip is for use with the M11X, MT-4/S and M12/S Transmitters. Sanwa recommends the steering wheel foam be replaced every 3 months to ensure supple operation.

AIRTRONICS # 97020. FITS: AIRTRONICS SERVOS AND OTHERS COMPATIBLE WITH AIRTRONICS BLUE "Z" CONNECTORS. DUAL SERVO Y HARNESS WITH BLUE "Z" CONNECTORS.

This is the Sanwa/Airtronics Super Vortex Type-D Sensored Brushless ESC, designed specifically for drift cars. The Super Vortex Type-D supports Sanwa SSL, which allows users to setup the ESC parameters with a SSL compatible radio system; such as the MT-4S and M12.

This is the Sanwa/Airtronics Super Vortex Gen2 ESC Program Box. This program box is compatible with the Sanwa Super Vortex Gen2 ESC's and provides a convenient method to program your ESC, as well as an easy method to update your ESC's firmware.

This is an optional Sanwa Aluminum Steering Wheel with a Blue ring, for the Sanwa/Airtronics M12 and M12S Transmitters. This wheel is very lightweight and adds a little bling to your radio.

This is the Sanwa/Airtronics High Speed, High Torque Micro Digital Wing Servo. Also known as the Airtronics 94761 servo, this micro wing servo features dual bearings, metal gears and impressive specs.

UPC Code:Does Not Apply.

Item #:LOSA99040. Losi LOSA99040 Metal Servo Arm Insert, 23S Spline, Airtronics (2). Losi 8ight 3.0.

© 2011 - 2016 Valkyrie RC Motorsports LLC. This is a waste of both parties time.

This is the Sanwa Medium Grip and Cover Set for the M12 and M12S Transmitters. Available in red, white or blue color. Available in small, medium or large.

The Sanwa Transmitter Bag 2 is a great option to keep your Sanwa/Airtronics transmitter safer. The bag features a zipper closure front flap, with zipper closure front pocket on the front, and a hook loop closure pocket on the inside.

Rare new in box Airtronics 2.4ghz conversion kit for the Stylus. This is the only kit available to convert your stylus from old FM to new 2.4ghz. P ayments.

This is a pair of Airtronics Micro Adjustable Servo Arms for use with RC Airplanes and other Models.

This is the Sanwa Super Vortex Gen2 Brushless SSL ESC. Compatible Brushless Motor: 3.5T or greater (Lipo 1 cell) / 4.5T or greater (Lipo 2cell). About SSL System. Function with Code 10 (SSL: Remote Transmitter Setting) FOR M12S & EXZES ZZ.

This is the Sanwa Medium Grip and Cover Set for the M12 and M12S Transmitters. Available in red, white or blue color. Available in small, medium or large.

BLUE GROOVE RC BLUE WHEEL TRANSMITTER GRIP.

This is an optional Sanwa Plastic Drop Down Assembly for the M12 and M12S Transmitters. This set includes the necessary drop down brackets, as well as mounting hardware.

Sanwa 150mm Servo Extension. 150mm long, with female Z connector on one end, and a male z connector on the other end.

This is the Sanwa Small Grip and Cover Set for the M12 and M12S Transmitters. Available in small, medium or large. Available in red, white or blue color.