Aquarium Meters & Regulators

Just peel off the back of the sticker ,and the transparent protective film at the front ,and stick it on the outside wall of the aquarium, that is it. Notice: The tank temperature sticker must be sticked below the water line.

LCD view area: 36.0mm x 16mm. Power: DC1.5v LR44 button cell batteries (included ). Cable length: 80cm.

If the surrounding temperature is 27°C, then the background of scale mark 27°C will turn colorful and other scale marks remain black. Stick on the outer surface of fish tank. No battery and suction cup to worry about.

Application: Aquarium, Indoor, Refrigerator, Human Body, Car, CPU Heat Diffuser. Temperature sensor cable length: 1m. Temperature Range:-50℃~110℃. Monitor Size:48x28x15mm. It is convenient and easy to use.

Self Adhesive Aquarium Temperature Gauge Sticker. Cases will be closed & item re-listed within a week after they open.

We will try our best to reduce the risk of the custom duties. Length: 14cm. Detail Image.

100% Brand New Easy to read accurate figures. Color: Crystal. With Fahrenheit and Centigrade Temperature Graduation. Attached a crystal suction cup. Is a long version that easily attaches to your tank with the suction cap provided. Size: 10.5*1.3*1.

DetailspH range: 0-14pHTemperature range: 0-60 CelsiusBNC Connector suitable for most pH meter and controller.Suitable for wide range of application: Aquariums, Hydroponics, Laboratory etc.This pH electrode has a single cylinder that allows direct connection to the input terminal of a pH meter,controller, or any pH device which has a BNC input terminal.The pH electrode probe is accurate and reliable that can gives almost instantaneous readings, helping you to check the quality of your water time and time again.Package included:1 x PH Electrode Probe BNC Connector Controller Meter SensorNote:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3 cm. .

Simply press the testing strip to the object or liquid you are testing. Half second later, take out the paper and using the color chart included, compare the color change of the paper to find out the acidity level of your testing subject.

When the appropriate pH of the fish is about 7, when the pH is higher than 8.0, the water body is alkaline, the appetite of the fish is decreased, and the growth is slow. When the PH is lower than 5.5, bacterial growth is accelerated, corrosion of fish gills and the fish suffocates.

Can be installed easily by adhesive tape. With digital clock 24 hours display. Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

LCD Display. Temperature range: -50~ 70°C. LCD size: 27mm 13mm (approx). Water proof. Simple operation. Accuracy: ±1°C.

Used to m easure water temperature of fish tank. Can be installed e asily by adhesive tape. With digital c lock 24 hours display. Color: Black (As pictures show).

Temperature range: -50~ 70°C. Simple operation. Wireless with integrated probe. NOTE: This item only displays in Celsius not in Fahrenheit. LCD size: 27mm 13mm (approx).

Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. With digital clock 24 hours display.

Especially applied in refrigerator, chiller, deepfreeze etc. LCD display. Temperature range: -50~ 70°C. Simple appearance. Power by 2 x LR44 button batteries. Color: White. Weight: 26g.

If the surrounding temperature is 27°C, then the background of scale mark 27°C will turn colorful and other scale marks remain black. Stick on the outer surface of fish tank. Simple to use and convenient to read.

It is easy to install on the fish tank wall with two back adhesive. Weight: Approx. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls. It can change freely between Fahrenheit and Celsius for easy reading and use.

Salinity 0.1ppt. Salinity -2%F.S. - 24-hour monitoring of the salinity of the tank (Unit: per thousand, with a specific gravity of. Remove the protective cap PH electrode, the electrode PH and salinity (or TDS) electrode is inserted. ).

The test strip color changes must be matched with the pH scale color chart within about 15 seconds. Simply press the testing strip to the object or liquid you are testing. Half second later, take out the paper and using the color chart included, compare the color change of the paper to find out the acidity level of your testing subject.

Suitable for the 5 to 18mm thickness of aquarium, and 5 to 16mm thickness of brace. Float Valve: (L)X(W)20X4.5cm/7.87"X1.77"(appr.). Put away on glasses, tighten the screws. Float above the surface of the water.

PH and Redox (ORP) value. Equipped with 2 probes (pH and redox), 2 circuits and 2 switched sockets. Simultaneously regulates the pH and redox values in liquids. 1 x Detachable 300cm ORP electrode. ORP: -1999 ~ 1999mV.

Can be used for every purpose, from a goldfish bowl to a full-blown reef tank. It can also be used for fish hatcheries, wine production, swimming pools, floristics, analysis of fluids (ph-value), ponds, various industrial applications, Pisciculture, Koi, Kois, Boiler,Pond, Spa, orchids breeding, breeder and hemp!

Precise scale, and easy to read. Material: Glass.

CO2 atomiser from UP AQUA, this is perfect for nano tank with DIY CO2 system.

Small and compact.

Two functions as CO2 bubble counter & check valve in one unit. Fill up the chamber with water prior to installation. Apply to both internal or external use. Attach the unit to the tank by suction cup.

Celsius &fahrenheit. Self Adhesive Aquarium Temperature Gauge Sticker. Cases will be closed & item re-listed within a week after they open.

Size: 16 x 7.8 x 1.5 cm Accuracy up to 0.001, do sampling test at about 5cm below the surface. 1 x Hydrometer Brand Unbranded MPN Does not apply UPC 4894462118986 EAN 4894462118986 ISBN 4894462118986.

Perfect thermometer for aquarium and fish tank.Easy to use, just add the thermometer to the outside of the fish tank.Transparent light, LED display, easy to read, temperature.Compact size, light weight, easy to operate.Technical specifications:Color: transparent silverMeasuring range: -45 Celsius ~ 80 CelsiusBattery: button batteryItem Size: 7 x 2 x 1.5 cm / 2.7 x 0.8 x 0.6inProduct weight: 12g / 0,4 ozNote: Please place the thermometer in the water.Package List: 1 x ThermometerNote: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm. Brand Unbranded MPN Does not apply UPC 190268439947 EAN 190268439947 ISBN 190268.

All kind of CO2CYLINDER as a high pressure CYLINDER, contain with 3-4 kg/ cm2 liquid state CO2, UP co2 regulator specially design for use in high pressure system. To release simple regulator from the CO2 bottle, to be sure the valve of the bottle is close, then release remnant gas pressure from the regulator, then unscrew from the bottle.

TURE RMS: Yes. Auto Power Off: Yes. Storage: Temperature -20~60 Celsius Humidity Less than 80%. Battery Type: 1.5V AAA Battery 2 (Does not contain battery). Weight: 330g. Display(LCD): 6000 counts.

Excellent for those who have fish tank. Indoor Temperature Range: -10 to 50 Degrees Celsius. It can switch celsius to fahrenheit on temperature display. Water Temperature Range: -50 to 70 Degrees Celsius.