Coil Springs for Holden Barina

HOLDEN BARINA XC MY03/04/04.5/05 (2001-05). 30mm "low" HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

2 Pcs Lovells Rear Super Low Coil Springs (Lower 45-65mm). About Lovells. Lovells Coil Springs Feature. Holden Barina SB Hatch 04/1994-11/1999. Shocks + Springs Kit. 4WD Lift Kit. Springs should be replaced to improve ride height, handling, load carrying capacity and comfort.

HOLDEN BARINA XC 2001-11/2005 (See Notes 60 Below). 2 x Rear Lowered Suspension King Coil Springs (Lower 30mm ). Raise 20mm. Notes 60 : Progressive Rate Design Used. Brakes,Steering & Suspension. Accessories, Body & Wipers.

HOLDEN BARINA TK/KL (12/2005-9/2011). 30mm "low" HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

HOLDEN BARINA TK/KL (2005-2011). 30mm "low" HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

HOLDEN Barina TK F16D 1.6 I4 FWD All Styles 12/2005-10/2011 (See Notes 54 Below). All KYB shock absorbers distributed within Australia have been engineered with specific valving for Australian conditions, Achieving superior ride comfort and greater steering stabiliy.

HOLDEN BARINA XC MY03/04/04.5/05. 30mm "low" HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

HOLDEN BARINA TK KL 12/2005-9/2011. 2 x Front Lowered Suspension King Coil Springs. 2 x Rear Lowered Suspension King Coil Springs. (Lower 30mm). Lower 30mm. Approximate Ride Height Change. Raise 20mm.

HOLDEN BARINA XC (Excluding SRi), 3 and 5 Door, Hatchback 4/01-11/2005. HOLDEN BARINA XC (SRi) 3 Door, Hatchback 4/01-11/2005. 2 x Rear Lowered King Coil Springs. 2 x Rear GT Gas (with exclusive Reflex Technology) Monroe Shock Absorbers.

HOLDEN BARINA XC (SRi) 3 Door, Hatchback 4/01-11/2005. 2 x Front Lowered King Coil Springs. 2 x Front Original Gas Monroe Shock Absorbers. Worn shock absorbers cause excessive sway around corners making the car a lot less stable.

HOLDEN BARINA XC Hatchback all models (incl. SRI) Feb-01 - Sep-05. Since it's release to the market, WEBCO have not stopped working on it! 2 Pcs Rear Webco Shock Absorbers. High Performance Rubber Bushes + Top Quality Bump Stop + Dust Boot (Optional) Exclusive to WEBCO Shocks.

HOLDEN BARINA TK, KL 12/2005 - 9/2011. Type: LOWERED COIL SPRING. Kings Springs exclusively use high quality, high stress X5K spring steel. Front Springs Rear Springs. Position: FRONT & REAR. Position: REAR.

HOLDEN BARINA SB (1994-00). 30mm "low" HEIGHT GENUINE KING COIL SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

You are buying one set of COIL SPRINGS KSFL-12 LOWERED FIT HOLDEN BARINA ML 1986-1988. KING SPRINGS. WATER PUMP. CLUTCH PRO -CLUTCH KIT. We are more than happy to assist you. ROCKER COVER GASKET. PICTURE IS FOR REFERENCE ONLY.

HOLDEN BARINA TM 10/2011-On. 2 x Front Lowered Suspension King Coil Springs. 2 x Rear Lowered Suspension King Coil Springs. (Lower 30mm). Lower 30mm. Approximate Ride Height Change. Raise 20mm. Accessories, Body & Wipers.

HOLDEN BARINA TK/KL. 30mm "low" HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

2 Pcs Lovells Rear Sport Low Coil Springs (Lower 25-40mm). About Lovells. Lovells Coil Springs Feature. Holden Barina SB Hatch 04/1994-11/1999. Shocks + Springs Kit. 4WD Lift Kit. Springs should be replaced to improve ride height, handling, load carrying capacity and comfort.

SUIT: Holden Barina XC Hatch 03/2001-on. Shocks + Springs Kit. 2 PCS of Front Sport Low Coil Springs ( 25-40mm Lower ). 2 PCS of Rear Sport Low Coil Springs ( 25-40mm Lower ). 4WD Lift Kit. Lovells Coil Springs Feature.

KINGS Front and Rear Lowered Springs to suit 200-2005 XC Barina models. King Spring Features. Bar peeled and polished to exact size. Scragged,load tested and inspected. Shot peened for maximum durability.

HOLDEN BARINA TK/KL (5/2005-9/2011). ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING. STANDARD HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE.

HOLDEN BARINA SB (1994-00). ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING. KING COIL SPRINGS. MOST COMMON WHEN SPRINGS HAVE SAGGED OR PREVIOUSLY FITTED WITH LOWERING SPRINGS WHICH ARE NOT REQUIRED.

HOLDEN BARINA XC MY03/04/04.5/05 (2001-05). 30mm "low" HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

HOLDEN BARINA MF/MH (1989-94). 30mm "low" HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

HOLDEN BARINA TK KL 12/2005-9/2011. 2 x Rear Standard Height Suspension King Coil Springs. Raise 20mm. Approximate Ride Height Change. Heavy Duty - Standard Height. Accessories, Body & Wipers. Transmission & Drivetrain.

HOLDEN BARINA SB (1994-00). ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING. STANDARD HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. MOST COMMON WHEN SPRINGS HAVE SAGGED OR PREVIOUSLY FITTED WITH LOWERING SPRINGS WHICH ARE NOT REQUIRED.

HOLDEN BARINA XC 2001 - 11/2005. Type: LOWERED COIL SPRING. Kings Springs exclusively use high quality, high stress X5K spring steel. Position: REAR. 12 Month Australian Warranty This warranty is given by PEC Australia Pty Ltd (ABN: 64164787722) This warranty is applied only to products listed and sold by PEC Australia.

HOLDEN BARINA MF MH 3 and 5 door, Hatchback 89-94. 2 x Front Original Gas Monroe Shock Absorbers. Worn shock absorbers cause excessive sway around corners making the car a lot less stable. 2 x Front Standard Height King Coil Springs.

HOLDEN BARINA XC Hatchback all models (incl. SRI) Feb-01 - Sep-05. 2 Pcs Front Webco Strut Shock Absorbers. High Performance Rubber Bushes + Top Quality Bump Stop + Dust Boot(Optional) exclusive to WEBCO Shocks.

HOLDEN BARINA MF/MH (1989-94). ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING. STANDARD HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. MOST COMMON WHEN SPRINGS HAVE SAGGED OR PREVIOUSLY FITTED WITH LOWERING SPRINGS WHICH ARE NOT REQUIRED.

HOLDEN BARINA TK Sedan & Hatch 4cyl Dec-05 - on. Since it's release to the market, WEBCO have not stopped working on it! 2 Pcs Rear Webco Shock Absorbers. High Performance Rubber Bushes + Top Quality Bump Stop + Dust Boot (Optional) Exclusive to WEBCO Shocks.

HOLDEN BARINA TM 10/2011 - 2019. Type: LOWERED COIL SPRING. Kings Springs exclusively use high quality, high stress X5K spring steel. Front Springs Rear Springs. This will be of equal build quality and performance.X CLOSE.

HOLDEN BARINA TM 10/2011 - 2019. Type: LOWERED COIL SPRING. Kings Springs exclusively use high quality, high stress X5K spring steel. Position: FRONT. This will be of equal build quality and performance.

Holden (GMH) BARINA MF, MH Hatch 3 5 door 1/89-94. FRONT GABRIEL SHOCK ABSORBERS G55891 2 Ultra Strut - Gas. REAR GABRIEL SHOCK ABSORBERS G55772 2 Ultra Strut - Gas. Shocks + Springs Kit. Gabriel Refer KYB :332052;332053;333194;333195;332051;333196.

HOLDEN BARINA MF/MH (1989-94). ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING. STANDARD HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. MOST COMMON WHEN SPRINGS HAVE SAGGED OR PREVIOUSLY FITTED WITH LOWERING SPRINGS WHICH ARE NOT REQUIRED.

HOLDEN BARINA XC (Excluding SRi), 3 and 5 Door, Hatchback 4/01-11/2005. 2 x Front Lowered King Coil Springs. 2 x Front GT Gas (with exclusive Reflex Technology) Monroe Shock Absorbers. Worn shock absorbers cause excessive sway around corners making the car a lot less stable.

HOLDEN BARINA SB (Including GSi) (Excluding chassis no WOL00007854359044), Hatchback 5/94-12/2000. 2 x Front Lowered King Coil Springs. 2 x Front Original Gas Monroe Shock Absorbers. Worn shock absorbers cause excessive sway around corners making the car a lot less stable.

HOLDEN BARINA ML (1986-88). ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING. STANDARD HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. MOST COMMON WHEN SPRINGS HAVE SAGGED OR PREVIOUSLY FITTED WITH LOWERING SPRINGS WHICH ARE NOT REQUIRED.

HOLDEN BARINA TK, KL 12/2005 - 9/2011. Type: LOWERED COIL SPRING. Kings Springs exclusively use high quality, high stress X5K spring steel. Position: FRONT. This will be of equal build quality and performance.

HOLDEN BARINA MF/MH (1989-94). ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING. STANDARD HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. MOST COMMON WHEN SPRINGS HAVE SAGGED OR PREVIOUSLY FITTED WITH LOWERING SPRINGS WHICH ARE NOT REQUIRED.

HOLDEN BARINA SB. 30mm "low" HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

HOLDEN BARINA ML (1986-88). 30mm "low" HEIGHT GENUINE KING COIL SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

HOLDEN BARINA ML (1986-88). ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING. STANDARD HEIGHT GENUINE KING COIL SPRINGS TO SUIT THE. KING COIL SPRINGS.

King Springs Lowered Springs Rear KHRL-148 <br /> <br /> King Springs Lowered Springs are the best choice for optimising your vehicle's handling by lowering its ride height. Engineered from the finest steel, King Springs Lowered Springs will lower your vehicle's stance without a massive compromise on comfort.

2 Pcs Rear Sport Low Lovells Coil Springs( 25-40mm Lower ). HOLDEN BARINA XC Hatchback all models (incl. SRI) Feb-01 - Sep-05. 2 Pcs Rear Webco Shock Absorbers. High Performance Rubber Bushes + Top Quality Bump Stop + Dust Boot(Optional) exclusive to WEBCO Shocks.

FRONT COIL SPRING SUITS HOLDEN BARINA 1985-2018. HOLDEN BARINA.

HOLDEN Barina TK F16D 1.6 I4 FWD All Styles 12/2005-10/2011 (See Notes 83 Below). All KYB shock absorbers distributed within Australia have been engineered with specific valving for Australian conditions, Achieving superior ride comfort and greater steering stabiliy.

HOLDEN BARINA XC 2001 - 11/2005. Type: LOWERED COIL SPRING. Kings Springs exclusively use high quality, high stress X5K spring steel. Position: FRONT. 12 Month Australian Warranty This warranty is given by PEC Australia Pty Ltd (ABN: 64164787722) This warranty is applied only to products listed and sold by PEC Australia.

HOLDEN BARINA SPARK Front Stabilizer Bushing D22. HOLDEN BARINA SPARK M100 (1998-2005). Need help choosing the right part for your Holden Barina Spark?. - Drive: (4X4/2WD/AWD). Vehicles listed above may have variations which include country of origin, build month/year and driveline options.