Coil Springs for Mitsubishi Lancer

THESE SPRINGS WILL LOWER THE FRONT AND REAR APPROX 30MM FROM A FACT ORIGINAL HEIGHT. REAR: AICRL-218.

THESE SPRINGS WILL LOWER THE FRONT AND REAR APPROX 30MM FROM A FACT ORIGINAL HEIGHT. REAR: AICRL-48.

MITSUBISHI LANCER CE SEDAN CEII MY00-MY02-MY02.5 (JUL'96-JUL'03). ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING. 50mm "SUPER LOW" HEIGHT GENUINE KING COIL SPRINGS TO SUIT THE.

THESE SPRINGS WILL LOWER THE FRONT AND REAR APPROX 30MM FROM A FACT ORIGINAL HEIGHT. REAR: AICRL-216.

Whiteline Coil Springs have been engineered to deliver a progressive rate coil for enhanced handling, greater control and increased tyre-to-road contact. Designed to work in conjunction with performance or OE shock absorbers and manufactured in Europe from the highest quality materials, Whiteline Coil Springs are an ideal, cost-effective suspension solution for performance oriented drivers. Whiteline's unique progressive rate coil design not only improves handling performance, it also improves the overall look of your vehicle.

2 x Super Low Lovells Springs. 2 x Gabriel Ultra Spring Seat Shock Absorbers - Gas. Mitsubishi Lancer CE 1.5, 1.6, 1.8L Sedan, Coupe excl. EVO 4WD 5/96-9/03. Mitsubishi Mirage CE 1.5L Hatchback 5/96-9/04.

This setup is designed for drivers who look for the ultimate balance of comfort and superior performance, coupled with a smooth and forgiving overall ride quality. For most of those vehicles equipped with McPherson Struts, the front pillowball upper mounts are automatically upgraded to Camber adjustable upper mounts.

MITSUBISHI LANCER CE CEII MY00/02/02.5 (1996-03). ALL KING COIL SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING. 50mm "SUPER LOW" HEIGHTGENUINE KING COIL SPRINGS TO SUIT THE.

MITSUBISHI LANCER CH MY06 2.4L SEDAN. 30mm "low" HEIGHT GENUINE KING SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

The V1 Design VA Series Coilover Kit includes Pillowball Upper Mounts in the front, and Rubber Upper mounts in the rear, for improved insulation and reduced noise. - Mitsubishi Lancer & GSR CB/CC/CD.

By lowering the vehicles centre of gravity, the unique and progressive rate coil design not only improve performance but enhance overall appearance. By lowering the vehicles centre of gravity, the unique and progressive rate coil design not only improves performance but enhances overall appearance.

THESE SPRINGS WILL LOWER THE FRONT AND REAR APPROX 30MM FROM A FACT ORIGINAL HEIGHT. REAR: AICRL-48SL.

SUIT: Mitsubishi Lancer CH MY06 Sedan Hatch 03-8/07. Shocks Springs Kit. 2 PCS of Front Sport Low Coil Springs ( 25-40mm Lower ). 2 PCS of Rear Sport Low Coil Springs ( 25-40mm Lower ). 4WD Lift Kit.

This setup is designed for drivers who look for the ultimate balance of comfort and superior performance, coupled with a smooth and forgiving overall ride quality. For most of those vehicles equipped with McPherson Struts, the front pillowball upper mounts are automatically upgraded to Camber adjustable upper mounts.

Its external reservoirs allow more oil to be contained than a conventional coilover, to slow down oil temperature increase. BC ER Series Coilover Standard Features - Mitsubishi Evolution 1. - Mitsubishi Evolution 2.

This setup is designed for drivers who look for the ultimate balance of comfort and superior performance, coupled with a smooth and forgiving overall ride quality. For most of those vehicles equipped with McPherson Struts, the front pillowball upper mounts are automatically upgraded to Camber adjustable upper mounts.

MITSUBISHI LANCER CC SEDAN. 30mm "low" HEIGHT GENUINE KING SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

SUIT: Mitsubishi Lancer CJ Sedan Hatch 4/12-on. Shocks Springs Kit. 2 PCS of Front Sport Low Coil Springs ( 25-40mm Lower ). 2 PCS of Rear Sport Low Coil Springs ( 25-40mm Lower ). 4WD Lift Kit. Lovells Coil Springs Feature.

Whiteline Coil Springs have been engineered to deliver a progressive rate coil for enhanced handling, greater control and increased tyre-to-road contact. Designed to work in conjunction with performance or OE shock absorbers and manufactured in Europe from the highest quality materials, Whiteline Coil Springs are an ideal, cost-effective suspension solution for performance oriented drivers. Whiteline's unique progressive rate coil design not only improves handling performance, it also improves the overall look of your vehicle.

REAR OF AN MITSUBISHI LANCER LA, LB. A.R.S. LOWERING BLOCKS TO SUIT THE. A.R.S. LOWERING BLOCKS ARE. 100% AUSTRALIAN MADE AND ARE MADE FROM HIGH QUALITY EXTRUDED ALLOY (NOT CHEAP CAST BLOCKS). WE CAN MAKE CUSTOM BLOCKS FOR NEARLY ALL MAKE AND MODEL VEHICLES!

THESE SPRINGS WILL LOWER THE FRONT APPROX 30MM FROM A FACT ORIGINAL HEIGHT.

REAR OF AN MITSUBISHI GALANT SIGMA LANCER LC. A.R.S. LOWERING BLOCKS TO SUIT THE. A.R.S. LOWERING BLOCKS ARE. 100% AUSTRALIAN MADE AND ARE MADE FROM HIGH QUALITY EXTRUDED ALLOY (NOT CHEAP CAST BLOCKS).

1992 - 1996 Mitsubishi Lancer 1.5 (CC) Sedan Petrol 65 REAR LOW PROFILE. 1992 - 1996 Mitsubishi Lancer 1.8 (CC) Sedan Petrol 86 REAR LOW PROFILE. 1996 - 1999 Mitsubishi Lancer 1.5 12V (CJ-CP) Sedan Petrol 69 REAR LOW PROFILE.

MITSUBISHI LANCER CJ/MY08-ON 2.0L SEDAN. 30mm "low" HEIGHT GENUINE KING SPRINGS TO SUIT THE. THESE SPRINGS WILL LOWER THE CAR APPROX 30mm FROM FACTORY. ALL KING SPRINGS ARE MADE TO HIGHER SPRINGS RATES THEN O.E. AND WILL REDUCE BODY ROLL AND IMPROVE HANDLING.

Mitsubishi Lancer CH MY06 Sedan, Hatch (7/05-8/07) Super Low Springs Lovells Product Features? Superior performance for mass produced O.E coil springs Exceed O.E ratings by 10% - 50% Australian made with Australian steel Manufactured to the highest standards Progressive rate design enables the spring to increase spring rate when needed Lovells Ride Height? Super Low (45-65mm lower) Lowered (25-40mm lower) Heavy Duty (standard ride height) Raised/Cargo Duty (20mm higher) Why Lovells? Lovells has cemented their reputation as a world leader, manufacturer and supplier of premium quality springs and suspension components to give you "The Ride of your Life". From performance vehicles to intercity express passenger trains to rugged mining vehicles and freight locomotives, Lovells have the experie.

MITSUBISHI LANCER CJ 2.0 SEDAN 9/2007-On. 2 x Front Lowered Suspension King Coil Springs. 2 x Rear Lowered Suspension King Coil Springs. (Lower 30mm). Lower 30mm. Approximate Ride Height Change. Raise 20mm.

THESE SPRINGS WILL LOWER THE REAR APPROX 30MM FROM A FACT ORIGINAL HEIGHT. REAR: AICRL-212.

MITSUBISHI LANCER CJ - RALLIART 4WD 2009 - Current Lowered Coil. The Progressive Rate springs give you the best of both worlds the spring behaves close to the original rate under normal conditions - and the critical phase for ride comfort from the point of travel back to a steady state - and only increases in spring-rate when the extra stiffness is actually needed.

Model # 52911. Enhance the look of your vehicle with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort.

2 Pcs Lovells Front Sport Low Coil Springs (Lower 25-40mm). About Lovells. Lovells Coil Springs Feature. Mitsubishi FTO Coupe 4cyl 2000-on. Mitsubishi Lancer CC GSR 4cyl 08/1994-05/1996. Shocks Springs Kit.

MITSUBISHI LANCER CE Sedan & Coupe Jul-96 - Jul-02. Pair Rear Webco Spring Seat Shock Absorbers. About Webco Shock Absorbers 2 Pcs Rear Raised King Coil Springs(20mm Raised). Gas Filled Twin Tube Strut Shock Absorbers, They are all GAS sealed.

MITSUBISHI LANCER CJ - RALLIART 4WD 2009 - 2019. Kings Springs exclusively use high quality, high stress X5K spring steel. Type: LOWERED COIL SPRING. PEC AustraliaX CLOSE. Position: REAR. This will be of equal build quality and performance.X CLOSE.

Item: Coil Spring Kit Lowered F R For Lancer 05 -08 2.4 VRX (CG,CH,CJ). KCFL49-KCRL48 Mitsubishi Lancer 2005 - 2008 2.4 VRX (CG,CH,CJ) Petrol --. Part number Make Model Year Series Body Type Notes.

Mitsubishi lancer Front And Rear Springs. Condition is Used. Only used for approximately 10,000kms Pick up Bowen mountain, blacktown or st Mary's

THESE SPRINGS WILL LOWER THE FRONT AND REAR APPROX 30MM FROM A FACT ORIGINAL HEIGHT. REAR: AICRL-214.

KCFL49-KCRL48 Mitsubishi Lancer 2008 - 2018 2.4 (CJ) Petrol --. Item: Coil Spring Kit Lowered F R For Lancer 2008-2018 2.4 (CJ). Part number Make Model Year Series Body Type Notes.

MITSUBISHI LANCER CC SEDAN/COUPE 10/1992-5/1996 (See Notes 68 Below). 2 x Front Super Low Suspension King Coil Springs (Lower 40 - 50mm ). Approximate Ride Height Change. Brakes,Steering & Suspension.

MITSUBISHI FTO Import 1994-1997 (See Notes 60 Below). 2 x Rear Lowered Suspension King Coil Springs (Lower 30mm ). MITSUBISHI MIRAGE CE 1996-2003 (See Notes 60 Below). Raise 20mm. Accessories, Body & Wipers.

Kings Springs exclusively use high quality, high stress X5K spring steel. Kings Springs Super Low coils generally lowers the hieght by 40-50mm below standard. Type: SUPER LOW COIL SPRING. PEC AustraliaX CLOSE.

THESE SPRINGS WILL LOWER THE FRONT APPROX 50MM FROM A FACTORY STANDARD HEIGHT. (30,000 kms).

MITSUBISHI LANCER CC SEDAN/COUPE 10/1992-5/1996. 2 x Rear Super Low Suspension King Coil Springs. 2 x Front Super Low Suspension King Coil Springs. Approximate Ride Height Change. Raise 20mm. Transmission & Drivetrain.

Mitsubishi EVO 10 CZ4A. Its external reservoirs allow more oil to be contained than a conventional coilover, to slow down oil temperature increase. BC HR Series Coilover Standard Features - Anodized Alloy Casing.

THESE SPRINGS WILL LOWER THE REAR APPROX 30MM FROM A FACT ORIGINAL HEIGHT. REAR: AICRL-37.

2 Pcs Front Webco Standard Pre Assembled Struts With Top Mount & Lovells Coil Springs. High Performance Rubber Bushes Top Quality Bump Stop Dust Boot(Optional) exclusive to WEBCO Shocks. MITSUBISHI LANCER CE Sedan & Coupe Jul-96 - Jul-02.

H&R Sports Springs 29297-2 - suits Mitsubishi LANCER EVO VIII, IX Only MR & Ralliart versions 2002 - 2008. Only MR & Ralliart versions. Sport Springs. Follow the directions of subsequent correspondence.

LOW KING SPRINGS. King Springs coils are made ofultra strong 'X5K' steel. So strong in fact, that they are able to lighten the springs by up to30% withno compromise to unit strength. With the expert knowledge developed through years of specialising in car suspension and four wheel drive suspension, Wholesale Suspension can correctly utilise components to suit your individual needs, whether for Performance, Handling, Load Carrying, Comfort, Ride Height or Lowering.

THESE SPRINGS WILL LOWER THE FRONT AND REAR APPROX 30MM FROM A FACT ORIGINAL HEIGHT. REAR: AICRL-37.

THESE SPRINGS WILL LOWER THE FRONT AND REAR APPROX 30MM FROM A FACT ORIGINAL HEIGHT. REAR: AICRL-29.