Disk Controllers & RAID Cards

Highpoint RocketRAID 640L Controller. Model RocketRAID 640L. RAID 0, 1, 5, 10, JBOD. Supports 4 SATA 6Gb/s and 3Gb/s HDD/SSD. Checkout Instructions or Cash on pickup. Internet Banking (Preferred method).

This is 3 Ports SATA 1 IDE PCI I/O Controller Card, which owns 1 external SATA port, 2 internal SATA ports and 1 internal IDE port ! Support PCI 2X mode and PCI native mode. Single channel master mode hard disk controller supports two enhanced IDE devices.

It's a handy eSATA RAID solution for power users who want a high speed eSATA transmission rate. A "Power over eSATA" connector is a hybrid of both eSATA and USB2.0, so that it supports USB A Type/eSATA/eSATAp devices.

Product Name: desktop PCI-E To SATA3.0 expansion card. The main chip: asmedia ASM1061. No external power required for the card. Supports two independent SATA 3.0 channels. (Supports 2 SATA devices at the same time.).

ServeRAID M5110 SAS/SATA PCIe RAID Controller Card. Part #: 00AE807. Included: Card as pictured (no mounting plate). Local Pickup! Item as images. Manufacturer Specifications Consumer Electronics. Model #.

The ST521PMINT optimizes port usage enabling you to connect up to five SATA drives to a single SATA port. To ensure maximum performance the SATA port multiplier supports SATA III host controllers and hard drives, with transfer speeds up to 6 Gbps, so you can experience fast performance, even with 5 individual drives connected.

Opened box not used

The HP 431103-001 is a low-cost 4-port 3Gb/s internal SATA SAS host bus adapter. HP 431103-001 / LSI SAS3041E 4-port SAS/SATA PCI-e RAID Controller - Used Pull. Integrated RAID 0, 1, and 1E. Connects to both SAS and SATA HDDs and tape drives.

PRS2 RAID card is designed specifically for enthusiast gamers, using two M.2 SSD to set up RAID 0 and PCI-E port to achieve real 12Gbps. Supports RAID 0/RAID 1/ AHCI, RAID 0 enables the speed reach up to 12Gbps.

The RocketRAID 1640 provides multi level RAID support, including RAID 0, 1, 5, 10, JBOD, as well as powerful software management functions. Product Name: RocketRAID 1640 SATA RAID Controller. Controller RocketRaid1640 PCI to SATA.

It is covered by remaining HP warranty.

Let us win-win! Support SSD: 4-Ports mSATA. KingShare 4-Ports mSATA PCI-e Card / 1PCS. Support Capacity: Single 2TB. RAID Function: RAID0 / RAID1 / RAID1 0. Master Control: Mavell 9230. Hot Plug: Support.

Supports Serial ATA II Port- Multiplier. Serial ATA Generation 2 transfer rate of 3.0 Gbps. Hot plug for extended Serial ATA port. Compliant with Serial ATA 1.0. Supports independent Serial ATA and independent Pata channels.

When you used different capacity of Micro SD cards, in RAID 0 mode, the total capacity is the smaller capacity of Micro SD card multiplied by the number of Micro SD card. Insert the Micro SD cards into the slots and connect the SATA port to host side, and then turn on the computer, the LED lamp will light.

2 Port SATA-II & ATA133 Port Raid Controller. Supports RAID 0, 1, 0 1, JBOD (for RAID version only). Revision 1.0a. Supports Port Multiplier with Command-based Switching on SATA II port. Compliant with Bus Master Programming interface for IDE ATA Controllers Revision 1.0.

SUpports ultra and multiword DMA timing modes. Supports bus master DMA at 133MB/sec PCI burst rate. Supports up to 4 IDE/ATA devices. 128 Byte buffer.

Provides 2 internal SATA ports, 1 x External SATA port, 1 internal IDE port and 1 x SATA cable and Driver CD. notes:- card is untested and may or may not be in working condition (ie it is at your risk).

It's a handy eSATA RAID solution for power users who want a high speed eSATA transmission rate. A "Power over eSATA" connector is a hybrid of both eSATA and USB2.0, so that it supports USB A Type/eSATA/eSATAp devices.

Increase the data storage capacity of your Raspberry Pi or other development board, by connecting it directly to an mSATA drive. Perfect for custom projects and applications, this USB to mSATA converter supports all models of Raspberry Pi as well as other development boards.

ServeRAID MR10i SAS 8708E PCIe Controller Card. 43W4342 44E8763. Part #: 43W4297,43W4342, 44E8763. Included: Card as pictured. Item as images. AKA Model # Consumer Electronics. Model #.

Supports two SATA Ports. Compatible with SATA 6G,3G and 1.5G Hard Drives. This product can only be installed on a PCI-E interface, Do not install the older PCI interface. And due to the difference between different monitors, the picture may not reflect the actual color of the item.

Photo(s) of actual item. It comes with no warranty implied or given. Product is second hand and as such is sold AS IS.

This card provides two IDE connectors that support Ultra ATA/133 Protocols and RAID functions 0, 1 and 0 1. Each IDE connector can support a master/slave combination of any devices, including Ultra ATA /133, Ultra ATA /100, Ultra ATA / 66, Ultra ATA / 33, EIDE / Fast ATA-2, IDE and ATAPI standards.

Click here to see description.

The adapter can connect up to eight drives in total and is compatible with 12Gbps SAS drives as well as 6Gbps SATA drives. For a hassle-free installation, you can mount the adapter into any new or legacy desktop expansion slot, including: PCI, AGP, and PCIe.