Fault Locators & Reflectometry

Type: 30mW. Output Power: More than 30mw. Finding the breakpoint, poor connections, bending or cracking in fiber optic cables. 1X Visual Fault Locator. Economical tool for fiber tracing, fiber routing and continuity cheching in an optical network during and after installation.

We greatly appreciate your support.

Output power: 10mW. Optical connector: 2.5mm universal connector.

Good condition, Full working order. Manufactured 2015.

Keep pushing the snake cable into the pipe until the detector head cannot move further. (It reaches the blockage position). Detecting snake cable length: 20m. When music gets louder and more lights are turned on, the signal receiver is getting closer to the detector head.

Type: 1mW. Output Power: More than 1mw. Finding the breakpoint, poor connections, bending or cracking in fiber optic cables. 1X Visual Fault Locator. Economical tool for fiber tracing, fiber routing and continuity cheching in an optical network during and after installation.

This professional general purpose cable locator is ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits and locating interruptions and short-circuits in cables and electrical floor heating systems.

Signal application can be either direct connection or, if there is no access point, Induction. With the addition of the optional signal clamp the VM-550 transmitter can be applied to the target line no matter the situation.

ProsKit MT-7510. 10mW Fibre Optic Cable Tester. Fibre optic visual fault locator is designed for field personnel who need an efficient and economical tool for continuity checking in an optical network during and after installation.

Radiodetection RD2000 SuperC.A.T Advanced Underground Cable & Pipe Locator Kit The Radiodetection SuperC.A.T range is a next generation high performance underground cable and pipe locator designed precisely to trace specific buried cables and pipes, even in high congestion areas.

Lightweight and easy to use, the RD312 is weatherproof to IP54. Lightweight - only 1kg. Weatherproof to IP54. Operates from 9V battery. Constructed from high impact ABS and aluminium, the RD312 is weatherproof to IP54, allowing locating to be carried out in tough weather conditions.

The SuperC.A.T TLcan locate small signals even in areas of high electrical noise and congested utilities. Multiple frequency selection give the operator an unprecedented level of flexibility. Finally a 640Hz low frequency locate signal lends itself to locating over longer distances and with less possibility of the signal coupling onto other services.

It can also indicate the distance to a fault in the cable (open or short), given access to only one end of a two or more conductor cable. to a range of 6000 ft (2000m), on at least two conductors. The Fault Mapper.

The RD316 provides the ability to detect surveyor's markers, valve boxes and manhole covers up to 2.5m, as well as locating larger objects such as storage tanks, drums and cast iron pipes down to depths of 4.5m.

USB 2.0 interface with Windows compatible software "TraceXtra" gives the user an option to download and analyse saved traces to a windows PC. Also the interface allows the user to upload saved traces from PC hard disk to the unit.

The Super C.A.T TLcan even locate small signals even in areas of high electrical noise and congested utilities. Multiple frequency selection give the operator an unprecedented level of flexibility. Having a high freqency will allow the signal to couple to the most difficult cables and services, and matched with the lower frequencies, allows the RD2000 Super C.A.T TL to be used across a range of location applications.

A built in oscillator also provides a tone for pair tracing and identification. Selectable cable impedance matching, along with variable velocity factor, enable the TX2001 to be used to test all communication cables, including twisted pair and coaxial, with graphical results and fault distances displayed on a dot matrix LCD.

Housed in a rugged IP54 rated ABS enclosure, the TX2003 is suitable for outside use. A 6km cable run can be scanned in seconds, allowing the operator a view of the cable run, yet arriving quickly to the fault.

A built in oscillator also provides a tone for pair tracing and identification. Selectable cable impedance matching, along with variable velocity factor, enable the TX2002 to be used to test all communication cables, including twisted pair and coaxial, with graphical results and fault distances displayed on a 64 x 128 dot matrix LCD.

Near and far end faults are clearly displayed on its 128 x 64 pixel back lit Liquid Crystal Display. The Auto Fault Location key will move the cursor directly to the first event or fault, thus eliminating the need to visually interpret the wave form.

The Fault Mapper Pro® incorporates an oscillating tone tracer, which is detectable with a standard tone tracer, for use in the tracing and identification of cable pairs. Works with twisted pair, parallel and coaxial cable.

BI Communications LanCaster Data Cable Digital TDR The BI Communications LanCaster is a professional Structured Cabling Tester and Trouble Shooter designed to speed up the on-site testing of data and voice networks, and the production testing of cable assemblies.

In addition the LanCaster Pro-ST has a large backlit screen. In addition, a built in tone generator (oscillator) transmits a warble tone into the cable enabling detection and tracing using a standard probe.

HT Italia QUICKLAN6055 LAN Wire Mapper Tester The HT Italia QUICKLAN 6055 permits the user to quickly undertake wire mapping tests of LAN networks, RJ45 twisted pair cables in compliance to standards.

AEMC CA7028 Wire Mapper Pro LAN Network Cable Tester The Wire Mapper Pro® Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTPand SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B (ISO11801 and EN 50137), USOC or ISDN specifications.

Features such as the bargraph ‘tidemark’ enable an operator to quickly spot a peak response and zero-in on a buried conductor. The Genny4 Signal Generator provides simultaneous dual-frequency locate signal output.

ProsKit MT-7501. 1mW Fibre Optic Cable Tester. Fibre optic visual fault locator is designed for field personnel who need an efficient and economical tool for continuity checking in an optical network during and after installation.

In the event that the FaultCaster™ is connected to a live cable a warning will be displayed, and alarm tone sounded and testing inhibited. The FaultCaster™ incorporates an oscillating tone generator, that is detectable using a standard tone probe, for use in the tracing and identification of pairs within a cable.

BI Communications QUINTEST Data Cabling / LAN Tester The QUINTEST is a simple to use Structured Cabling Tester featuring a continually sequencing green / red LED display on both main and remote units.

ST880 CABLE FAULT LOCATOR. BUY IT NOW !

You are looking at aRidgid Locator SeekTech Transmitter & Inductive Signal Clamp KIT. SeekTech Locator Wand. SeekTech Receivers with their large display give you the information you need when you need it to locate more with greater certainty.

Impact Punch Down Tool punchdown tool is used for inserting wires into sockets, patch panels or outlets. Blades precisely trim and insert wire. This convenient tool is the only thing you need to add, change or remove wires from connections.

Radiodetection RD7000DL. You are looking at aRadiodetection RD7000DL TX3 Cable Avoidance Tool System pipe locator Kit. Designed specifically for the water industry, the RD7000DL has four different sonde signals as well as active and passive frequencies, making this locator perfect for locating water pipes and drains located deep underground as well as normal pipes and cables.

No microbend, QA test OTDR @ 1310/1625nm for SMF.

FLUKE FOS 850/1300. FLUKE DSP-FOM. Fibre optic cable continuity. Used with a light source the FOM can perform many tests on multimode fibre optic cable systems including Acceptable fibre types 9-125 to 100-140μm.

● Detecting snake cable length: 20M. ● Waterproof detecting head that works in damp pipes. ● Detecting cable reel x1. Keep pushing the snake cable into the pipe until the detector head cannot move further.

With 33 active frequencies, ranging from an ultra low frequency of 128Hz up to a ultra high 200kHz frequency, the RD8000PTLM gives the operator the highest number of available locate frequencies, for identifcation of even more multiple buried utilities.

You are looking at aRadiodetection RD7100 DL TX5 Cable Avoidance Tool System pipe locator Kit. RD7100’s ergonomic balanced design and light weight (4.2lbs / 1.9kgs) ensures it is comfortable to use for extended periods.