Hobby RC Flight Recorder, Telemetry Systems & Accessories

(TBS UNIFY 5G8 Video transmitter (MMCX). Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard" :) ) down to a bare minimum for FPV racing, at a very attractive price!

FatShark Dominator V3 modular 3D FPV Headset - 2016 NEWEST VERSION. Genuine Fat Shark part. The DominatorV3 focuses on HDMI connetivity with 720p support through a robust mini HDMI port and 16:9 format WVGA image.

This component installs onto the spur gear and holds a magnet that is detected by the RPM sensor.

Made of Durable Material.

Compatible with all Spektrum DSMX transmitters.

And for other vehicles, setup is as simple as inserting your models motor pole count and tire roll out. Application : DX2E ACTIVE.

High quality 170 degree lens with M7 thread. Power Supplies. Hard-Case Lipo Plug Harnesses. Motor/ESC Combos. Hard-Case Lipos. Lipo-Safe Charging Bags. 32DP, 5.0mm. 32DP, 3.2mm.

This is the Eagle Tree Systems Micro Temperature Sensor. Connect Up to three temperature sensors to the eLogger V3 simultaneously (two simultaneously for the V1/V2). 250 degrees F maximum temperature.

For the Traxxas Spartan.

Image Device: 800TVL HD Chip. Horizontal Resolution: 800TVL. System Format: PAL/NTSC PAL(H V): 512 582; NTSC(H V): 542 492. Shock/Diff Oil. Storage Temperature Range: -20~60 Degrees Celsius(Max. humidity 95%).

This is the Spektrum USB Interface for the AR7200BX flybarless helicopter receiver. Required to update the AR7200BX firmware. USB interface for AR7200BX flybarless helicopter receiver.

Modulation: DSMX or DSM2. Length: 1.69 in (43mm).

This is the Dynamite Temp Sensor for DYN4103, 4300 & 4105.

This is the Eagle Tree Systems Cylinder Head Temperature Sensor.

This is the Eagle Tree Systems Brushless RPM Sensor. Eagle Tree Brushless RPM Sensor with motor and universal receiver connector, instruction sheet. Works with all versions of the Eagle Tree MicroPower, Seagull Flight Systems and Data Recorder V2 products with firmware version 4.

This is the Spektrum Heavy-Duty Rev Limit Bracket Set for the AR7100R Receiver. For the Spektrum AR7100R Receiver. One Spektrum Heavy-Duty Rev Limit Bracket Set.

Monitors all 3-axes up to 8G. Threshold alarm.

Works as a complete USB Castle Link with your computer. Works with all Castle Link compatible air products.

Fits DJI P4 PRO Obsidian / Inspire2 / Matrice 200. Need to extend your flight range?. DJI Matrice 200. DJI Phantom 4 Pro Obsidian. DJI Inspire 2. The best long range antenna system your money can buy.

This is the Hitec HTS-C50 50 Amp current sensor. Includes : HTS-C50 50 Amp Current Sensor with Wire Lead.

Easy installation and use. Weight: Circuit board - 4 gram.

Compatible with Optima 7 and 9 receivers, Spectra 2.4 module and Aurora 9 transmitter.

This is the Spektrum AS3X Programming Cable with a USB Interface. One Spektrum AS3X Programming Cable with a USB Interface.

This is the Tekin Hotwire 2.0 USB Interface. Tekin HotWire runs on the following Windows platforms Note: Most Android devices running 3.1 and newer should support HotWire connectivity. Windows 8 (32 bit & 64 bit).

Reads speeds up to 560 MPH (900 KPH).

This is the Orion DBS R Program Box Adapter.

This is the Hitec DPC-11 Universal Programming Interface.

This is the Eagle Tree Systems 150 amp e-Logger V4 On-Board Data Logger. 150 amp e-Logger V4 On-Board Data Logger and USB cable. RPM Range: Approx 100 RPM to 50,000 RPM. Temperature: Dual inputs, 0º F to 424º F (three temp inputs).

For the Traxxas XO-1, Traxxas E-Revo and Traxxas Summit.

Features : For use with electric powered Traxxas vehicles.

This is the Traxxas auto-detectable temperature sensor.

Castle Link is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10. Macintosh installation is not supported by Castle Creations. Program your Castle Creations brushless ESCs and accessories on your Windows PC with the Castle Link USB programming kit!

Works as a complete USB Castle Link with your computer. Works with all Castle Link compatible car products. Requires : Windows PC and Castle Link Software.

Includes : Long RPM Sensor with Zip Tie and 3x4mm Button Head Cap Screws.

It includes an ingenious Point-N-Fly function that lets you reposition the drone in flight simply by pointing where you want it to go. Wizard: Chroma. Not compatible with Chroma models BLH8670 and BLH8680.

It's as simple as that. This is the Castle Creations Link Quick Connect. Facilitates Castle Link function.

Includes : Short RPM Sensor with Zip Tie, 3x4mm Button Head Cap Screw and 3x4mm Set Screw. Features : Functions with the Traxxas Link system to display motor RPM.